right,i have these bits left,can any one help me with where they go,please!!








help please!!

 

Tell me the wire colour and then we'll see

 

top pic,i cant really remember,i'll have a betta look,2nd pic 1 is purple 1 is purple and green and 1 is purple and blue,i think there fan wires of some sort

 

The top pic looks like connectors from the fuel trip computer (if it had one fitted).
The white/clear connector would be the speedo drive and the black one would be the fuel flow sensor.??????

The second picture is a vacuum/boost hose which should go to or from your amal valve.
The amal valve if you look closely will have a letter by each of the three pipes comming off it. W.R.C

1, W is the pipe from the wastegate actuator.
2, R is the return ( to the bottom of the fuel metering head).
3, C is the pipe to the compressor housing on the turbo.

The third picture I am not sure about, you could be right with the fan idea though.

HTH

 

cheers mate,the computer wires are already hooked up,as for the pipe,i have a ajustible boost thing inside,whitch goed between the turbo and sum where,does tht mean i can block tht 1 off??
i gott the colours if it helps:
black conector is:black/yellow ,brown ,brown/green
white one :white/brown ,brown ,black/yellow(think)

my mate saiud they might be to the ABS whtich it dont use