can anyone help??????
i have a mk3 escort and am wanting to build a 2.0 16v zetec turbo to put in it
i know i have to blank of the breather at the front of the engine but where will the re-placement 1 be?
managament??

cheers

 

If you can help it dont block the front breather keep it.

 

cheers for the reply
i heard u have to change it because of clearence for the exhaust but i have a tubular manifold so this might resolve the problem

any more infor mation on a zetec turbo build would be great??

 

Yes, it might resolve the issue. I kept mine at the original position too.

The biggest pain in the **** was the engine mount. It's not the same on a mk3 as on a mk4 and it's hard to make the mounting rubber clear the oil pump/filter. Early 80-83 Escort CVH engine mounting rubber will work but they are hard to find as new.

 

cheers well i have already put a 2.0 zetec into it so the engine mount has already been done so i havent that to worry about anymore

 

You need to decide what exactly it is you want to do, as some stuff will be a problem and some wont (eg, front breather is ok with a focus rs manifold setup)..