mechanical abs
#1
Part of the Furniture
Thread Starter
Join Date: Jul 2008
Location: sleaford lincolnshire
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
mechanical abs
hello people, i was just wondering on how to go about taking the abs system off my escort rs turbo, ive got a master cylinder off a 1.6 sierra. it has only 3 outlets. wud this be substantial. iyt means i wud have to split the outlets to the rear is that ok???
cheers
chris
cheers
chris
#2
PassionFord Regular
Join Date: Sep 2007
Location: east yorks
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate, I would just change the resvoir (spelling) to a 2 outlet.
The abs pumps are a bit of a twat to get off but with a bit of brute force and an angle ginder they come.
Some people just tie wrap the sensors and others put a loop wire in.
Then ya need to loop the brake pipes together in the blocks under the floor at the front, just remember which went to which.
Im sure all will be clear when ya start the job.
After its all removed another bonus is its a piece of piss to do a clutch change with all that shite out the way.
Good luck. cheers steve
The abs pumps are a bit of a twat to get off but with a bit of brute force and an angle ginder they come.
Some people just tie wrap the sensors and others put a loop wire in.
Then ya need to loop the brake pipes together in the blocks under the floor at the front, just remember which went to which.
Im sure all will be clear when ya start the job.
After its all removed another bonus is its a piece of piss to do a clutch change with all that shite out the way.
Good luck. cheers steve
Thread
Thread Starter
Forum
Replies
Last Post