Group A coil
10 minute job, with no cutting or drilling needed, though most cut the original wires and crimp spade terminals on the ends.
If not you could use bullet connectors to fit the ends of the wires leading to a short wire with a spade one each end, if you did not want to cut.
Connect up two wires to coil, secure in place of old one, it even fits on the std screw holes as the group a has elongated slots.
The + and - are between the terminals in the gap between each pair, took me a few mins to find!!
tabetha
If not you could use bullet connectors to fit the ends of the wires leading to a short wire with a spade one each end, if you did not want to cut.
Connect up two wires to coil, secure in place of old one, it even fits on the std screw holes as the group a has elongated slots.
The + and - are between the terminals in the gap between each pair, took me a few mins to find!!
tabetha
Trending Topics
not one group A coil for sale at burtons.
you all know that all group A cars run a coil pack,that has 4 plug lead fittings on,nothing like the so called group A ones burton are selling!!!!!!
not one group A car was ever built with one of them on!!!!!!!!!!!
not one group A car was ever built with one of them on!!!!!!!!!!!
I think everyone knows what people are reffering to when group a coil is mentioned, doesn't matter wether is it correct or not, so long as everybody wrong in the right way.
Makes a massive difference to smooth running and even gives better low down pull, although I now run a coilpack, and trigger wheel, single lobe dizzy centre etc, just got to experiemnt with plug gaps now.
My dad STOLE my group a coil as when I returned he had just finished fitting it to his 4i(v8), with new magnecor leads, world of difference on that, took away all the low speed shunting.
Trouble is he says he is entitled to it so more money I lose by not selling it!!
tabetha
Makes a massive difference to smooth running and even gives better low down pull, although I now run a coilpack, and trigger wheel, single lobe dizzy centre etc, just got to experiemnt with plug gaps now.
My dad STOLE my group a coil as when I returned he had just finished fitting it to his 4i(v8), with new magnecor leads, world of difference on that, took away all the low speed shunting.
Trouble is he says he is entitled to it so more money I lose by not selling it!!
tabetha
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
Oct 7, 2015 12:56 PM







