gavin1165

has any 1 got a list of what needs doing to a 1.8 zetec bottom end to run in my fiesta rs turbo thanks

borderfox

id like to know this meself.. i know there is a breather needs blocking up. oil returns taped and blocked. maybe one oil feed and a plate fo the water pump.

Bomber

The original ZVH site: http://www.quantums.info/zvh.htm

Loads of info on there

davidfox280585

blank 4 oil ways on the rear of the block off where the head mates. blank the front oil breather off tap a oil return in the front for the turbo and a breather in the rear buy a water pump adapter plate and usea 1.3 cvh cam belt tensioner either use a decomp plate or have the pistons skimmed to lower compression ratio and use a 1.6 zetec sump as it has exhaust cut out for exhaust to run through

gavin1165

ive forgot more than this kid nos haha