I want to change the RS turbo from bolts to studs because the UltraLite A-Tec rims i bought almost a year ago come with the Ultralite titanium wheel nuts. So i looked at some UK webshops and they have some conversion kits, 4 bolts that fits into the hub... But is that all i need ? And what size or dimension do i need for a Ford fitment ??

Henrik

 

i would also like to know this

 

Used to be ford motorsport parts, wheel std kit part no. 9094499

doubt they`re are still available though or how much they would be if you could get a set.

 

i just went down fords and got some studs for a mk5 escort(cost about Ł12 for 16)

drill the hole on the rs hub to 13mm and press the stud in

 

As said, drill the holes out to 13mm and bang studs in, easy

 

i used mk2 escort stud,as said you need to drill

 

I fitted diamond cut rs7s to my s2 and wanted to use the ford alloy wheel nuts supplied with them, speedshack do conversion studs, you just screw them in i put a bit of thread lock on the stud and just turned them in, have been on the car for two years now with no probs. Much better than the stupid bolts, pain in the arse when removeing/refitting wheels.
Good luck

 

Thanks

Just ordered a set of studs from Speedshack...

Soon the Ultralite A-Tec will be fitted on the RST

 

ive got a set of studs for sale they just screw into bolt hole and you use your nuts