Technical help Q & A Got A technical problem with you car? Keep it in here where the techies hang out and we will try to solve it for you!!

capri 2.8

Thread Tools
 
Search this Thread
 
Old Aug 4, 2007 | 02:19 PM
  #1  
bazpro's Avatar
bazpro
Thread Starter
PassionFord Regular
 
Joined: Dec 2004
Posts: 439
Likes: 0
From: durham
Default capri 2.8

i just bought a 2.8 capri and it got a bit of a running problem. it starts and drives ok but when it gets warm everytime i get 2 a junction and stop the car cuts out. the car starts afterwards but it really pissing me off any1 got any ideas wot it could be? the car has had a full service plugs leads filter dizzy cap and rotor arm and fuel filter. think it might b a fuelling problem as there is a smell of petrol when i start it.
Reply
Old Aug 4, 2007 | 03:08 PM
  #2  
tabetha's Avatar
tabetha
20K+ Super Poster.
 
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Default

Have you tried raising the idle speed ?
Failing that check it is not running lean.
tabetha
Reply
Old Aug 4, 2007 | 05:37 PM
  #3  
rs graham's Avatar
rs graham
Too many posts.. I need a life!!
 
Joined: Jun 2003
Posts: 710
Likes: 0
From: In the pub cheering on Ricky hatton and Joe calzaghe
Default

Had loads of 2.8s mate.check the breathers!
Reply
Old Aug 4, 2007 | 06:04 PM
  #4  
tabetha's Avatar
tabetha
20K+ Super Poster.
 
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Default

Had a xr4i was the slowest sierra I ever had, slower than my 2.1 auto by a long way, wish I had never bought it, but did look ace.
tabetha
Reply
Old Aug 5, 2007 | 10:42 AM
  #5  
bazpro's Avatar
bazpro
Thread Starter
PassionFord Regular
 
Joined: Dec 2004
Posts: 439
Likes: 0
From: durham
Default

tried raiseing the idle with the idle screw but it doesnt seem 2 make the revs pic up. thought about ajusting the mixture screw but not sure which way 2 turn it.
wheres the breathers at on a 2.8?
i know wot u mean by the 2.8 feeling slow seems quick 1 minute and slow the next i reckon my 2.0 pinto mk2 escort was quicker off the mark but the capri is so much nicer 2 drive.
started saving for some yb power now
Reply
Old Aug 5, 2007 | 11:21 AM
  #6  
tabetha's Avatar
tabetha
20K+ Super Poster.
 
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Default

Screw on fuel distributor is as far as can remember clockwise to richen, but VERY sensitive, so only a little turn at a time.
tabetha
Reply
Old Aug 5, 2007 | 12:22 PM
  #7  
bazpro's Avatar
bazpro
Thread Starter
PassionFord Regular
 
Joined: Dec 2004
Posts: 439
Likes: 0
From: durham
Default

cheers will try it today see if it makes a difference
Reply

Trending Topics

Old Aug 6, 2007 | 01:20 PM
  #8  
Glenn_'s Avatar
Glenn_
Glennvestite
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Jul 2006
Posts: 62,771
Likes: 1,049
From: Darlington county durham
Default

Have u been on the capri power web site i know there is a lad on there n he knows everything about capris n i mean everything.
Reply
Old Aug 6, 2007 | 04:47 PM
  #9  
bazpro's Avatar
bazpro
Thread Starter
PassionFord Regular
 
Joined: Dec 2004
Posts: 439
Likes: 0
From: durham
Default

cheers mate will have a look.

checked the plugs which have only been in a week and they where white. so that means it running lean doesnt it?
Reply
Old Aug 6, 2007 | 08:17 PM
  #10  
tabetha's Avatar
tabetha
20K+ Super Poster.
 
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Default

YEP white is lean IF they are the correct heat rating plugs.
tabetha
Reply
Old Aug 13, 2007 | 07:00 PM
  #11  
Wardy257's Avatar
Wardy257
Too many posts.. I need a life!!
 
Joined: Aug 2006
Posts: 818
Likes: 1
From: Lisbon
Default

You cant set the idle fuel properly DIY. You need to go to a garrage so they can see the emission while adjusting it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mk1turboestate
Cars for Sale
12
Dec 2, 2015 08:31 PM
XR4
Ford XR Range
0
Oct 1, 2015 12:46 PM
jonnyenglish
General Car Related Discussion.
0
Sep 21, 2015 07:31 AM
STAFFY OWNER
Pictures, video & Photoshop Forum
10
Sep 13, 2015 08:59 PM
Adam Graham
Restorations, Rebuilds & Projects.
7
Sep 6, 2015 06:04 AM




All times are GMT. The time now is 09:07 PM.