XR3I TURBO CONVERSION please help
hi all just finished my rst engine into my xr3i and just need some help,on my loom i cant find the thin black wire that goes to the 6mm bolt on the starter motor(its like its not on my loom)will it matter if i run it i just connect up the alternater and starter without this wire?thanks for your help
ok sh*t that not good yeah
i have been lookn for this wire but cant find it anywhere all i can find is the red/black wire, and the blue wire that goes to the alternator
i have been lookn for this wire but cant find it anywhere all i can find is the red/black wire, and the blue wire that goes to the alternator
black is an un-fused ignition feed, the solenoid wire is a cranking feed, the wire will be black with either a blue/red stripe on it.
It usually exits the loom close to the passenger side and then for some reason doubles back across along the cross member
It usually exits the loom close to the passenger side and then for some reason doubles back across along the cross member
Trending Topics
okay sorry safechav yeah i have this wire connected its a thick red/black wire with a push on connector,but i dont have a thin black wire that goes on the 6mm bolt hole
On the small nut there should only be a black & red/blue wire.
On the bigger nut will be the main red cable from the battery, and the 2 red wires coming from the alternator.
Amal valve:
C = compressor housing
W = actuator
R = return to the air box
On the bigger nut will be the main red cable from the battery, and the 2 red wires coming from the alternator.
Amal valve:
C = compressor housing
W = actuator
R = return to the air box
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
Apr 26, 2021 12:09 PM
Matt Baxter
Ford RS Cosworth Parts for Sale
6
Sep 16, 2015 08:30 PM
marky_g
General Car Related Discussion.
10
Aug 15, 2015 10:43 AM




