arp head bolt help
#1
arp head bolt help
hi could any one tell me the torque setting for the arp head bolt kit and should there be some washers to go on before the bolts,i would be really greatfull if some one can help me because ime planing on puting my engine in at the weekend and cant find the settings i need
thanks
rob
thanks
rob
#2
you should have washers
torque settings are
stag1 1 25 nm or 18 lbf ft
stage2 55 nm or 40 lbf ft
stage 3 mark the bolts with tip ex then turn them all quarter of a turn then stage 4 turn them all quarter of a turn again all marks should be facing same way
and make shaw you tighten them all in the right order which is
1 bottom mibble
2 top middle
3 second bottom right
4 second top left
5 second bottom left
6 second top right
7 end bottom left
8end top right
9 end bottom right
10 end top left
torque settings are
stag1 1 25 nm or 18 lbf ft
stage2 55 nm or 40 lbf ft
stage 3 mark the bolts with tip ex then turn them all quarter of a turn then stage 4 turn them all quarter of a turn again all marks should be facing same way
and make shaw you tighten them all in the right order which is
1 bottom mibble
2 top middle
3 second bottom right
4 second top left
5 second bottom left
6 second top right
7 end bottom left
8end top right
9 end bottom right
10 end top left
Thread
Thread Starter
Forum
Replies
Last Post