b_kennedy

Hi guys. Could any one tell me how to wire an - oil pressure gauge and a
- water temperature gauge
on an escort rs turbo please. Apart from the obvious of the wiring them to lights etc. Where do i wire it to and where can it be found on the engine. Many thanks

tabetha

Oil pressure use a "T" piece in the original pressure switch location to run pressure switch and new OIL PRESSURE SENDER.
For water temp guage, you will not be able to use the original in case it is calibrated differently(most liklely) to ford one so will need to find a way of inserting somewhere, maybe make/buy a metal section to go in a hose with a boss in it for temp sender.
tabetha

b_kennedy

thanks for the help. I'll check it out tmorrow. thanks again

SafeChav

Strip all the wires back, twist them all together and close your eyes while you turn the key