firstly hello to all i am a newby.i dont run a ford but a cavalier turbo c20let,and i have a manual boost controller to be fitted to it question i have is can it be fitted in series with the amal valve so i have a little bit safety if something goes wrong ordoes it have to do away with the amal.i also run a courtney pahse 1 chip,15-16psi overboost and 9-10 psi held i have a front mounted intercooler what boost should i set the mbc at ? would 12psi be safe and would i need to adjust actuator.thanks in advance.

 

remove the amal, best spk to the chaps on here that run lets

www.migweb.co.uk