who can solve this problem for me
4x4 saff n0 1 and 2 injector not fireing cange injector ,swap
wire around and still the same problem what could it be and also
no 1 plug getting wet engine loom is in good working order

 

Have you actually checked that the injector has a spray ????
also have you checked the feed plug with a noyd or test light to make sure you have a pulse to switch the injector ????

cossie is sequential fires the same as cylinder cycle sounds a bit like head gasket may be blown between 1&2 also carry out a compression check
Doug

 

hi m8
have check injector by takeing off the fuelrail with tne injector
still connect to it crank the engine to see them spray and only 1 and2
were spraying swap the wire 2to 3 and tried a cople of other which i now
works and still the same compression ratio has being check it is a bran new
just being built by a good engine builder what else could it possible be

 

have u tryed swaping the idle conrol valve wire for one of the injector wires i had this problem arfter a head gasket