ian rst

I have some comp mo'2 in 18" with an offset of 30 so i have got a 5mm spacer and they are hitting the suspension cups? How can i get round this? Without getting bigger spacers? I heard you can hit the cup a bit?????????????

kjc300

iTrader: (1)

Have you got Koni's???

ian rst

Yes mate

kjc300

iTrader: (1)

Aha!!

Well my spring platforms have been slightly fettled!! i.e. bent up out of the way, and sawn off!!!! lolol.

I believe this is a common mod!!!

I'll try and find a pic!!

ian rst

cheers mate if you can find one thats would be good. Looks like i will take an angle grinder to it?

kjc300

iTrader: (1)

This is the only pic I have.



Basically the outer lip has been heated and bent up out of the way. Taking care not to impede any of the spring coils. I think the top of the lip has been removed so it doesn't hit the second coil up - if you know what I mean.

ian rst

Blimey, ok so a bit of work needed. Thanks for that.

Mark T

No problems getting 18 " wheels on this baby !.
Must be a Ford thing

[/img][/url]

Fastmaul

don't think soo...

Here's mine on 18's



And here's Nicks on 19's

Mark T

Ha ha quality, must say respect to the black 3 door .
But the question is did the 19's go on without mods ?.
I'm guessing there was some work there.

Mark.

Lmcarguy

Yours looks nice on 18's, can you tell me the wheel ET and tire size you are running? Thanks

Fastmaul

Nick's going to have to answer that, Looking at your car it looks like it's still in stilts Lower that puppy.

Mark T

Stilts maybe but at least they went straight on with no mods unlike some cars .
Can't be done with the lowering thing the handling is sh!t hot as it is and I don't want the hassle of having to tackle speed humps and driveways all the time, been there done that .
Lmcarguy if your question was aimed at me the ET is 48 and the tyre size is 225/40 18.

Mark.

Lmcarguy

Thank you Mark, I appreicate the reply, but my questions was for the cosworth with 18's, I wasn't very clear, I have since found my answer on another post by fastmaul. Thank you Lmcarguy


"I had to mod the front arches, but then again, I had 225 35 18's. Coilovers and 35 offset. The backs were fine and was using 245 35 18 with 30 offset. Yeah, little rub here and there but nothing to big, just no pie eaters in the back seats."