90 SPEC RS TURBO RESTO. !!SOLD SOLD SOLD !! 15.10.07
#361
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
After another flat down with red scotch brite ,it ws all cleaned up wth this panel wipe ready for paint.
![](https://i35.photobucket.com/albums/d192/minter123/boot9.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/boot7-1.jpg)
Then first coat of paint.I,m only using spray cans as 1.It's not seen and 2.the original paint is only dull matt mercury grey colour with out the clear coat
First just feathering in the edges.
![](https://i35.photobucket.com/albums/d192/minter123/boot10.jpg)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![](https://i35.photobucket.com/albums/d192/minter123/boot9.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/boot7-1.jpg)
Then first coat of paint.I,m only using spray cans as 1.It's not seen and 2.the original paint is only dull matt mercury grey colour with out the clear coat
First just feathering in the edges.
![](https://i35.photobucket.com/albums/d192/minter123/boot10.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/boot7.jpg)
#363
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
All done.
![](https://i35.photobucket.com/albums/d192/minter123/boot16.jpg)
Have a few more little things to do before the VALETER from work comes over next week and works his magic.Full wet mop,wax and handglaze.
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![](https://i35.photobucket.com/albums/d192/minter123/boot16.jpg)
Have a few more little things to do before the VALETER from work comes over next week and works his magic.Full wet mop,wax and handglaze.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#364
Advanced PassionFord User
![](https://passionford.com/forum/images/pf_gold_member.png)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
looks sweet
wish i had the time, patience and expertise to actually finish a project to a high quality instead i have a go and end up 3 steps back wondering why i bother lol
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#370
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
and here's some pics after he's finished.
![](https://i35.photobucket.com/albums/d192/minter123/ba24.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba23.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba22.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba21.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba20.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba19.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba18.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba17.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba16.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba15.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba14.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba13.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba12.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba11.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba9.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba7.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba6.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba4.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba3.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba2.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba1.jpg)
Just needs another wash then DIAMOND BRITE it all over.
Well pleased with it,has n't been this clean for 2 years.
![](https://i35.photobucket.com/albums/d192/minter123/ba.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba24.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba23.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba22.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba21.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba20.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba19.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba18.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba17.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba16.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba15.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba14.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba13.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba12.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba11.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba9.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba7.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba6.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba4.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba3.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba2.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/ba1.jpg)
Just needs another wash then DIAMOND BRITE it all over.
Well pleased with it,has n't been this clean for 2 years.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#379
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by AquariousRS
lovely. I want your brembos ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://i35.photobucket.com/albums/d192/minter123/ba.jpg)
Well i only done them like that to match my front BREMBO conversion.
![](https://i35.photobucket.com/albums/d192/minter123/sellbrem.jpg)
But have now decided to ditch the FAKE BREMBO,S on the rear and replaced them with these.
Brandnew cossie 2wd rear calipers.
![](https://i35.photobucket.com/albums/d192/minter123/turbotat2.jpg)
Will be just painted red and fitted this weekend.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#380
Black Country RSOC
Join Date: Oct 2005
Location: Stourbridge
Posts: 2,282
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I've just read this thread from start to finish, and all i can say is fair play fella for sticking with it throughout.
I've got to the fed up/bored stage with mine at the moment, so i've decided to cover it up in the garage and forget about if for a while. That way, the next time i get it out, it should rekindle some of the old buzz!
Keep up the good work mate !
I've got to the fed up/bored stage with mine at the moment, so i've decided to cover it up in the garage and forget about if for a while. That way, the next time i get it out, it should rekindle some of the old buzz!
Keep up the good work mate !
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#388
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well it,s been 2 years in the waiting,but yesterday my car made it,s first outing and what better place to go than FORD FAIR.Was kindly offered a space on the INTERFORD stand.
Drove there with no problems ,but couldn,t boot it as i had the wife and baby with me.
Here,s a few pics.
Before we set off.All polished and full of shell optimex.
![](https://i35.photobucket.com/albums/d192/minter123/show.jpg)
On the stand.
![](https://i35.photobucket.com/albums/d192/minter123/show7.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show6.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show4.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show3.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show2.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show1.jpg)
A few more
![](https://i35.photobucket.com/albums/d192/minter123/show20.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show19.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show17.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show16.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show15.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show14.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show13.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show12.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show11.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show10.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show9.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show8.jpg)
My only purchase was 2 RS OWNERS CLUB seat covers.
Just got to fit my front brembo,s and higher the back suspension(sit,s slighty lower than the front) ,and my car will be complete.
Might be selling it as apart from a couple of shows and the weekends it won,t get used.
Drove there with no problems ,but couldn,t boot it as i had the wife and baby with me.
Here,s a few pics.
Before we set off.All polished and full of shell optimex.
![](https://i35.photobucket.com/albums/d192/minter123/show.jpg)
On the stand.
![](https://i35.photobucket.com/albums/d192/minter123/show7.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show6.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show4.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show3.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show2.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show1.jpg)
A few more
![](https://i35.photobucket.com/albums/d192/minter123/show20.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show19.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show17.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show16.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show15.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show14.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show13.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show12.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show11.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show10.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show9.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/show8.jpg)
My only purchase was 2 RS OWNERS CLUB seat covers.
Just got to fit my front brembo,s and higher the back suspension(sit,s slighty lower than the front) ,and my car will be complete.
Might be selling it as apart from a couple of shows and the weekends it won,t get used.
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#389
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Aug 2004
Location: Lincoln!
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
saw this bag of shit on sunday.....
Looked very nice mate, and yes you should definatly sell it, seems the law with RST's that as soon as they are mint and running well, you have to sell them
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Looked very nice mate, and yes you should definatly sell it, seems the law with RST's that as soon as they are mint and running well, you have to sell them
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#392
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Yeh,decided to have a good look around the show and not sit by my car polishing it all day.
My bonnet was only open when i was sitting near it.
My bonnet was only open when i was sitting near it.
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#396
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
As i said to LINCLON DANNY,was trying to see as much of the show as possible so was only near mine for 10 minutes here and there.
Saw yours though.
But not you
I take you will be at NATIONAL DAY.???
If so,hope to catch up with you then.
Saw yours though.
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
I take you will be at NATIONAL DAY.???
If so,hope to catch up with you then.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#397
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Just a small mod i,m trying to get sorted before NATIONAL DAY.
I want to smooth the area around my BOOST GAUGE so it will look like it came from the factory like that.
Looks like this at the moment.
![](https://i35.photobucket.com/albums/d192/minter123/pod1.jpg)
I want to smooth the area around my BOOST GAUGE so it will look like it came from the factory like that.
Looks like this at the moment.
![](https://i35.photobucket.com/albums/d192/minter123/pod1.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod.jpg)
#399
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thought i,d make a start on my dash suround so took it to work and started pulling it apart.
![](https://i35.photobucket.com/albums/d192/minter123/pod3.jpg)
Then re-bonded it so it sits flush.Put masking tape on the front then placed the re-cut panel ontop so it was level
![](https://i35.photobucket.com/albums/d192/minter123/pod4.jpg)
Then mixed up some fibre glass and set it in place.
![](https://i35.photobucket.com/albums/d192/minter123/pod5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod6.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod7.jpg)
All nice and flush
![](https://i35.photobucket.com/albums/d192/minter123/pod8.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod10.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod9.jpg)
Then first skim of filler
[i
![](https://i35.photobucket.com/albums/d192/minter123/pod12.jpg)
Then sanded down with 120 grit.
![](https://i35.photobucket.com/albums/d192/minter123/pod14.jpg)
Second skim to get rid of imperfections and final shaping
![](https://i35.photobucket.com/albums/d192/minter123/pod15.jpg)
Will smooth and prime tommorrow.Getting there.
![](https://i35.photobucket.com/albums/d192/minter123/pod3.jpg)
Then re-bonded it so it sits flush.Put masking tape on the front then placed the re-cut panel ontop so it was level
![](https://i35.photobucket.com/albums/d192/minter123/pod4.jpg)
Then mixed up some fibre glass and set it in place.
![](https://i35.photobucket.com/albums/d192/minter123/pod5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod6.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod7.jpg)
All nice and flush
![](https://i35.photobucket.com/albums/d192/minter123/pod8.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod10.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod9.jpg)
Then first skim of filler
![](https://i35.photobucket.com/albums/d192/minter123/pod11.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/pod12.jpg)
Then sanded down with 120 grit.
![](https://i35.photobucket.com/albums/d192/minter123/pod14.jpg)
Second skim to get rid of imperfections and final shaping
![](https://i35.photobucket.com/albums/d192/minter123/pod15.jpg)
Will smooth and prime tommorrow.Getting there.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#400
PassionFord Post Troll
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Just a small update.Bit more sanding today.
![](https://i35.photobucket.com/albums/d192/minter123/PODD.jpg)
Then primer.
![](https://i35.photobucket.com/albums/d192/minter123/PODD1.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/PODD2.jpg)
Quick test fit.
![](https://i35.photobucket.com/albums/d192/minter123/PODD3.jpg)
Then more flatting and primer.
![](https://i35.photobucket.com/albums/d192/minter123/PODD4.jpg)
Then guide coated and left to dry on my box.
![](https://i35.photobucket.com/albums/d192/minter123/PODD5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/PODD6.jpg)
Will finish prepping and paint it tommorrow.
![](https://i35.photobucket.com/albums/d192/minter123/PODD.jpg)
Then primer.
![](https://i35.photobucket.com/albums/d192/minter123/PODD1.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/PODD2.jpg)
Quick test fit.
![](https://i35.photobucket.com/albums/d192/minter123/PODD3.jpg)
Then more flatting and primer.
![](https://i35.photobucket.com/albums/d192/minter123/PODD4.jpg)
Then guide coated and left to dry on my box.
![](https://i35.photobucket.com/albums/d192/minter123/PODD5.jpg)
![](https://i35.photobucket.com/albums/d192/minter123/PODD6.jpg)
Will finish prepping and paint it tommorrow.