Rosso red Rs turbo build and progress.
#2081
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
had the pleasure of being taken for a ride shotgun in this monster last weekend.
absolutely unreal, seems like next to no turbo lag, boosting well before 3k, zero wheelspin, piles the speed on like you wouldnt believe and handles like its on rails as demonstrated by Mat Mcrae on the roads of wrexico
an amazing job from top to bottom and massive respect to all involved, the days of all or nothing lag monster 300+bhp cvh engined rs turbos are over
absolutely unreal, seems like next to no turbo lag, boosting well before 3k, zero wheelspin, piles the speed on like you wouldnt believe and handles like its on rails as demonstrated by Mat Mcrae on the roads of wrexico
an amazing job from top to bottom and massive respect to all involved, the days of all or nothing lag monster 300+bhp cvh engined rs turbos are over
Anytime mate , and thank you its certainly no slouch , we actually hit and held some big speed through those bends , and the poor blackbird we hit around 135
#2082
Too many posts.. I need a life!!
Thank you for the information!
I think the turbo you are using is a massive improvement over the oldschool Garrett T3 turbos.
What incredible boost response - and still having plenty of capacity for high HP output.
Wide powerband - incredible!
I think I know where my next investment will be - modern efficient turbocharger.
I think the turbo you are using is a massive improvement over the oldschool Garrett T3 turbos.
What incredible boost response - and still having plenty of capacity for high HP output.
Wide powerband - incredible!
I think I know where my next investment will be - modern efficient turbocharger.
#2083
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
Thank you for the information!
I think the turbo you are using is a massive improvement over the oldschool Garrett T3 turbos.
What incredible boost response - and still having plenty of capacity for high HP output.
Wide powerband - incredible!
I think I know where my next investment will be - modern efficient turbocharger.
I think the turbo you are using is a massive improvement over the oldschool Garrett T3 turbos.
What incredible boost response - and still having plenty of capacity for high HP output.
Wide powerband - incredible!
I think I know where my next investment will be - modern efficient turbocharger.
No problem at all , a modern Turbo along with a good flowing top and bottom end and spark table , fueling and the CVH come massively alive.
#2085
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
Decided to get a few jobs done over the cold period .
Full service .
breather set up to return back to sump under the oil level.
spoiler painted and a few smart repairs on some heavy stone chips.
Oil cooler maybe , see what my data is saying on the temps.
Need to get my car over to MK Motorsport when Mark is free and get this ARB sorted and working once and for all..!
Tempted to drop a wheel size and use more of a road tyre... (maybe)
Full service .
breather set up to return back to sump under the oil level.
spoiler painted and a few smart repairs on some heavy stone chips.
Oil cooler maybe , see what my data is saying on the temps.
Need to get my car over to MK Motorsport when Mark is free and get this ARB sorted and working once and for all..!
Tempted to drop a wheel size and use more of a road tyre... (maybe)
Last edited by Rsmat; 17-10-2020 at 09:56 PM.
The following users liked this post:
bluntys1rsturbo (17-10-2020)
#2087
Boost addict
Decided to get a few jobs done over the cold period .
Full service .
breather set up to return back to sump under the oil level.
spoiler painted and a few smart repairs on some heavy stone chips.
Oil cooler maybe , see what my data is saying on the temps.
Need to get my car over to MK Motorsport when Mark is free and get this ARB sorted and working once and for all..!
Tempted to drop a wheel size and use more of a road tyre... (maybe)
Full service .
breather set up to return back to sump under the oil level.
spoiler painted and a few smart repairs on some heavy stone chips.
Oil cooler maybe , see what my data is saying on the temps.
Need to get my car over to MK Motorsport when Mark is free and get this ARB sorted and working once and for all..!
Tempted to drop a wheel size and use more of a road tyre... (maybe)
sounds like some good plans for over the winter months mate. ill no doubt be over for a few visits anyway
#2089
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
Not much to report , not even seen the car for 5weeks nearly now and not touched anything , need to get my finger out and get a quote for painting the bits mentioned,, sump im about the purchase another and have the fitting fitted to accept the return to sump etc .. ARB is in the Air at the min As MK seems to appear to be ignoring my message , no big deal ill throw him a visit at some point and get this ARB squared away. Only needs minor tweaks now .
The following users liked this post:
slammedorion (04-11-2020)
#2090
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
Managed to go take a look and turn the car over for the first time in 5 weeks. Its started first turn of the key, .. managed to get hold of MK also and sorting a date for after Xmas... I need to buy a new sump this week and send it to Murray at GONE for it Gated and fittings for oil temp and oil return from breather , ill send him the breather also to convert,
Managed to get some new things to fit and have a play with over winter .
Managed to get some new things to fit and have a play with over winter .
Last edited by Rsmat; 16-11-2020 at 06:54 AM.
#2092
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
No smells at all with it and the car really hardly breaths , but every so often the roller rockers flick the oil to the back of the rocker cover and it goes through the baffles and into the breather , done it about 4 times now in 8k+ mileage, so decided to return the breather to sump so if it does it again I don't have to empty it and the engine isn't low of oil .
Last edited by Rsmat; 16-11-2020 at 06:55 AM.
The following users liked this post:
turbo m (13-12-2020)
#2094
PassionFord Post Troll
Officially gassed llf or dmo deejay?😀
The following users liked this post:
smiley (03-12-2020)
The following 2 users liked this post by Rsmat:
RSMK4TURBO (08-12-2020),
turbo m (13-12-2020)
#2098
Advanced PassionFord User
Car looks mint in video, shame about the good old British weather, got be one of the best spec'd ERSTs in the country.
#2100
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
just a little Yea but in his defence it need setting up again since I whipped the bladed ABR and tcas off for powder coating
The following users liked this post:
turbo m (17-12-2020)
The following users liked this post:
Minirotty (01-02-2021)
#2105
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes
on
517 Posts
Not even seen the car since my BD video, so ive decided to start and get the ball rolling to get the jobs done and ready for summer..in the meantime I've managed to find some lovely compomotive mo5 that have been stored for the last 10 years , they need a colour change to silver and some nice 205/45/16 rubber and they will be ready to fit then ill get on with the other jobs and ready for summer where hopefully if restrictions lighten I can have a day with Mark Knight and get the traction and boost by gear all trimmed up and see if we can get her up the road quicker .
The following users liked this post:
bluntys1rsturbo (28-01-2021)
#2109
PassionFord Post Troll
Wheres the shifter from Mat? Looked up Vos (given the logo on the render) but I could only find a truck company
No worries if you don't want to disclose, just looks a very cool/interesting concept
No worries if you don't want to disclose, just looks a very cool/interesting concept
The following users liked this post:
Rsmat (29-01-2021)
The following users liked this post:
haz87 (30-01-2021)
The following users liked this post:
Rsmat (30-01-2021)
The following users liked this post:
bluntys1rsturbo (07-02-2021)