Escort Cosworth M3NTE TINY update page 13 Nov 15th 2007
#164
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Adam, loom tape? If you mean the stuff on my engine loom it came on it from pectel... the other tape is from a motor factors and Wurth, its hard to find decent tape which doesnt fall off after a few months ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Benn I know mate exactly why I was so pissed off saturday![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Ryan cheers mate... it wants to be for the price
I know I questioned the IGN amp business apparently they al like that, suuits me though less clutter in the bay ![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
Benn the pulleys have been Nickel plated
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Benn I know mate exactly why I was so pissed off saturday
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Ryan cheers mate... it wants to be for the price
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
Benn the pulleys have been Nickel plated
#165
15K+ Super Poster!!
Join Date: May 2003
Location: Southampton
Posts: 18,589
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi mate, yeah i know there not cheap, could have one identical for half the price
And the amp thing is a myth, i've seen plenty of Escort Cossy Pectel Looms with Amps in the stadard position
Mine obvious can be put anywhere in the bay upon customer request
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
And the amp thing is a myth, i've seen plenty of Escort Cossy Pectel Looms with Amps in the stadard position
Mine obvious can be put anywhere in the bay upon customer request
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
#166
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
amps are there so they can be tucked under the dash out of the way
less clutter in the engine bay
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Ryan... im ready to fit mine mate.. may be able to do it myself but need you to run me through what wires are left and where they need to go
less clutter in the engine bay
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Ryan... im ready to fit mine mate.. may be able to do it myself but need you to run me through what wires are left and where they need to go
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
#167
15K+ Super Poster!!
Join Date: May 2003
Location: Southampton
Posts: 18,589
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Dave, yeah i can run it through with you, pretty simple really.
If you loom is the same as Damo's a few move wires can be removed.
I'm sure damo and i can guide you on this.
Not a hard job at all just needs a bit of brain power and commitment, luckily for me you have both
If you loom is the same as Damo's a few move wires can be removed.
I'm sure damo and i can guide you on this.
Not a hard job at all just needs a bit of brain power and commitment, luckily for me you have both
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#168
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
cool, Ive spoken to Damo in a bit of length about it yesterday ... but for your info
these are ALL the looms plugs and outputs
ECU plug
Bank of 3 relays
Fuel pump take off
2 ign amp plugs
water injection take off
3 wire take off (says oil, oil lmp, water on each)
anti lag take off (x2)
boost pot take off (for 12 pos adj boost)
-----RUBBER BULK HEAD GROMMET ------
Cable with 3 inline fuses and linked to one ring connector (goes to battery i guess)
take off that says "water)
take off that says "H20"
2 x oil take offs (pressure switch)
coil pack take off (oval plug)
map sensor take off
2 wires from one, each labelled ign and tacho ( I TAKE IT THESE NEED TO BE JOINED TO WIRES ALREADY IN MY BAY?)
4 x injector plugs
air x 1 needs extension for air injectors
ISCV plug
Cam pick up sensor
GND - to inlet bolt?
Boost (amal valve) ?? why as im using air injectors (bladed plug as per amal)
Crank sensor
TPS sensor
these are ALL the looms plugs and outputs
ECU plug
Bank of 3 relays
Fuel pump take off
2 ign amp plugs
water injection take off
3 wire take off (says oil, oil lmp, water on each)
anti lag take off (x2)
boost pot take off (for 12 pos adj boost)
-----RUBBER BULK HEAD GROMMET ------
Cable with 3 inline fuses and linked to one ring connector (goes to battery i guess)
take off that says "water)
take off that says "H20"
2 x oil take offs (pressure switch)
coil pack take off (oval plug)
map sensor take off
2 wires from one, each labelled ign and tacho ( I TAKE IT THESE NEED TO BE JOINED TO WIRES ALREADY IN MY BAY?)
4 x injector plugs
air x 1 needs extension for air injectors
ISCV plug
Cam pick up sensor
GND - to inlet bolt?
Boost (amal valve) ?? why as im using air injectors (bladed plug as per amal)
Crank sensor
TPS sensor
#169
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Dave it will be very difficult for Ryan to decypher your list without pics, if he had it in his hands he would understand it perfectly I reckon, honestly as I said above its all (in theory) pretty straightforward
(I hope lol)
I reckon the amalvalve take off is there for people like me who thought they were gonna run a amal valve, but then decided to run Air to Air
its just a stabndard design loom, unlike Ryan's which as suggested could be made without that plug for example
Ryna I guess The IGN AMP business is something Harvey stipulates
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
I reckon the amalvalve take off is there for people like me who thought they were gonna run a amal valve, but then decided to run Air to Air
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Ryna I guess The IGN AMP business is something Harvey stipulates
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
#170
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Right, full steam ahead...
SCS have redeemed themselves
Harvey sent down themissing bits special delivery, got them today
The "bits" lol
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00880.jpg)
NEW Bher/Ford Rad![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00881.jpg)
Cracked on........
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00889.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00891.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00892.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00893.jpg)
Right thats it, now somehow I gotta get that in here![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00879.jpg)
Watch this space ....
SCS have redeemed themselves
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
The "bits" lol
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00880.jpg)
NEW Bher/Ford Rad
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00881.jpg)
Cracked on........
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00889.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00891.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00892.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00893.jpg)
Right thats it, now somehow I gotta get that in here
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00879.jpg)
Watch this space ....
#179
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Tony Turbo
I don't want to spoil it for you, but if Damo was "cooking on gas" yesterday, he has been using a flame thrower this evening!!!
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
Damo its all looking good
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#180
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Dave the trolley is about 80 years old
I reckon you can borrow it if you want...
Right tiny update tonight![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Been thinking of a few ways to fit all this back in, this is the best I could come up with![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
The old man is away for a few days, tonight I cracked on, little bit of headscratching and finger crossing, I came up with this...
Proper pleased with myself, managed to fit it all up by myself, not bad for a first-timer I reckon![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Just little bits now, fit up suspension, steering, connect prop fit exhaust downpipe, loom up
and then sus out fuel reg, air to air and coil pack mounting
I'm still waiting for my custom made plug leads though so cant really fit coil pack till then ![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Anyway enjoy.....
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00895.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00896.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00897.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00898.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00901.jpg)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Right tiny update tonight
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Been thinking of a few ways to fit all this back in, this is the best I could come up with
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
The old man is away for a few days, tonight I cracked on, little bit of headscratching and finger crossing, I came up with this...
Proper pleased with myself, managed to fit it all up by myself, not bad for a first-timer I reckon
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Just little bits now, fit up suspension, steering, connect prop fit exhaust downpipe, loom up
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Anyway enjoy.....
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00895.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00896.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00897.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00898.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00901.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00902.jpg)
#183
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Damo, when i get my box back, you're deffo coming down and we'll get mine in!!
reckon we can lift the front of the car up high enough with an engine lift?
then slide the engine and box in from underneath?
also, how did you remount the crossmember? jack the engine up, then bolt it on, and then lower the engine on to the mounts?
well done mate.. good progress!
reckon we can lift the front of the car up high enough with an engine lift?
then slide the engine and box in from underneath?
also, how did you remount the crossmember? jack the engine up, then bolt it on, and then lower the engine on to the mounts?
well done mate.. good progress!
#185
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Mike, I have a full time Job.. unlike Damo who dosses about on his car every day! ![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
Priorities first.. car second![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
be thankfull im putting my car on your stand ! might go elsewhere!
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
Priorities first.. car second
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
be thankfull im putting my car on your stand ! might go elsewhere!
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
#187
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by DaveEscos
reckon we can lift the front of the car up high enough with an engine lift?
then slide the engine and box in from underneath?
then slide the engine and box in from underneath?
We bolted the crossmember onto the engine before lifting it into the engine bay...
#188
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
cheers all ... Mike, it better bloody make it ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Dave, yeah slide engine under, lower car a bit, lift engine with crane bolt up front crossmember (to engine mounts also), bolt up rear box cradle, lower crane
stand back and take a bow ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Dave is your centre console out? it will be easier in your instance if the gear linkage is attached to box before fitment, i just connected mine all up while it was in the air, well 2 feet off the ground lol
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Dave, yeah slide engine under, lower car a bit, lift engine with crane bolt up front crossmember (to engine mounts also), bolt up rear box cradle, lower crane
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Dave is your centre console out? it will be easier in your instance if the gear linkage is attached to box before fitment, i just connected mine all up while it was in the air, well 2 feet off the ground lol
#191
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Friday afternoon, spent a little bit of time fitting up the engine loom... Had to leave early though as I had a wedding to go to ![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00903.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00904.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00906.jpg)
Fuel Reg's new home (I think)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00905.jpg)
Saturday afternoon was back over the garage a little worse for wear
... But I managed to get all the front suspension built up.. WHAT a bitch ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00907.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00908.jpg)
I will get some better pics of the underside another day![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Sunday I went over and "finished off"
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00909.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00910.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00911.jpg)
Thats it....!!! I'm still waiting for my plug leads and ECU from Harvey, plus I only ordered my fuel lines Friday, but if I had all those I woud have turned the key yesterday
.. not really alot I can do now till I get these bits
...
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00903.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00904.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00906.jpg)
Fuel Reg's new home (I think)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00905.jpg)
Saturday afternoon was back over the garage a little worse for wear
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00907.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00908.jpg)
I will get some better pics of the underside another day
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Sunday I went over and "finished off"
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00909.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00910.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00911.jpg)
Thats it....!!! I'm still waiting for my plug leads and ECU from Harvey, plus I only ordered my fuel lines Friday, but if I had all those I woud have turned the key yesterday
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
#193
PassionFord Post Whore!!
Thread Starter
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Not alot done today,just twiddling my thumbs really till I get the rest of the bits, but I tackled mounting the coilpack,I was gonna wait till I got the plug leads but I'll just have to hope they are long enough ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00912.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00913.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00914.jpg)
The extra bolt on the bracket is for an earth strap![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00915.jpg)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00912.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00913.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00914.jpg)
The extra bolt on the bracket is for an earth strap
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00915.jpg)
![](https://img.photobucket.com/albums/0603/DamoV/mnte/Engine/DSC00918.jpg)