Classic mini project
#41
10K+ Poster!!
Shit that white one was rotten!! Now we need pics of the new one
#42
PassionFord Post Whore!!
Thread Starter
This project will commence in a week, and be ready for heavy updates, as it's getting a very quick, thorough restoration, with some very secret mods...
#43
Lucifer II - 666
Look forward to new pics.
I'll be starting a build thread on my sons Mini next month.
I did purchase him a shell which is solid but only a shell with doors/boot/windows etc but also fibreglass roof.
I have been given a Mini which has been sat 6 years in a friends garage, going to collect end of July, been sat since she stopped using it as her daily, she can't tell me much about it as she isn't into cars so hopefully I'll be surprised.
I'll be starting a build thread on my sons Mini next month.
I did purchase him a shell which is solid but only a shell with doors/boot/windows etc but also fibreglass roof.
I have been given a Mini which has been sat 6 years in a friends garage, going to collect end of July, been sat since she stopped using it as her daily, she can't tell me much about it as she isn't into cars so hopefully I'll be surprised.
#44
PassionFord Post Whore!!
Thread Starter
Lucky getting a free mini!
And there will be plenty of pics too haha
I sold a shell recently, the red one. Did tons of welding, and didnt need much more, and it got cut up for a panel and scrapped
And I shall watch his mini too.
And there will be plenty of pics too haha
I sold a shell recently, the red one. Did tons of welding, and didnt need much more, and it got cut up for a panel and scrapped
And I shall watch his mini too.
#45
PassionFord Post Whore!!
Thread Starter
And an update at long last
Boring welding ones for 2 weeks. Then I rebuild the rear suspension and front suspension, and wham bam, it all becomes a rolling shell
I did 2 patches, but the camera is playing up, so only got the pic of before the patches, and the left one
After 4 months from not welding, it's ok, but it looks disgraceful
Cba grinding it down though, as once I can insure a sierra, I'm selling it
Boring welding ones for 2 weeks. Then I rebuild the rear suspension and front suspension, and wham bam, it all becomes a rolling shell
I did 2 patches, but the camera is playing up, so only got the pic of before the patches, and the left one
After 4 months from not welding, it's ok, but it looks disgraceful
Cba grinding it down though, as once I can insure a sierra, I'm selling it
#47
PassionFord Post Whore!!
Thread Starter
Yeah, everyone bangs on about how fun they are to drive, and that your not a car nut until you own one, so thought **** it, I'm buying one
#51
10K+ Poster!!
Looking good!
#53
10K+ Poster!!
Shit!!! That's a lot of rust, you'll no doubt fix it mind!
#55
Not Crazy, just Unwell
#58
PassionFord Post Whore!!
Thread Starter
Done a load more work
Done both sides, bare metalled, primed, and sealed the shock mounts which were relatively mint, and nolted them on. Then sealed round them, so no water can get in and do the same again. Also sealed, and primed the rear valence, and did some more floor work
Half the panels needed ordered, Ł306 But should see this rolling by next sunday
Done both sides, bare metalled, primed, and sealed the shock mounts which were relatively mint, and nolted them on. Then sealed round them, so no water can get in and do the same again. Also sealed, and primed the rear valence, and did some more floor work
Half the panels needed ordered, Ł306 But should see this rolling by next sunday
#63
PassionFord Post Whore!!
Thread Starter
Will be removing the scuttle, bracing the door apertures, and cutting the drivers flitch out tomorrow
But need help deciding a colour
Red
White
Blue
Quite hard lol
If I like it, plans are cage it, 13x8 alley cats, bucket seats, harnesses, wide arches, a decent sound system, straight cut box and jack knife drop gears, a k series 16v head, with a 1380 overbore, throttle bodies, and stainless centre exit exhaust.
But need help deciding a colour
Red
White
Blue
Quite hard lol
If I like it, plans are cage it, 13x8 alley cats, bucket seats, harnesses, wide arches, a decent sound system, straight cut box and jack knife drop gears, a k series 16v head, with a 1380 overbore, throttle bodies, and stainless centre exit exhaust.
#68
10K+ Poster!!
Yes, blue works!
#70
PassionFord Post Whore!!
Thread Starter
A few blue lovers. Just gotta find out what colour blue that is, and I think we have a winner to be honest.
Black was a thought, but for a daily, probably too difficult to keep it looking clean
Black was a thought, but for a daily, probably too difficult to keep it looking clean
#72
PassionFord Post Whore!!
Thread Starter
i like all 3, equally as much tbh for different reasons, so wanted others to kinda vote which looks nicer. Blue isnt common, so is nice in the way it's idfferent, and it looks really nice not in your face etc
#73
PassionFord Post Whore!!
Thread Starter
#74
ffoc.co.uk
Nice work man. As for what colour, I reckon british racing green looks very nice.
#75
PassionFord Post Whore!!
Thread Starter
Cheers, yeah I did consider BRG quite hard, but decided against it as it will cost more than a solid colour to paint, and this is very shoe string budget
#76
PassionFord Post Whore!!
Thread Starter
Update, 90% ready, just got to do a lot of weld dressing, and painting various bits, as well as a tiny slither patch, and I will weld the outer sill on. All prep now.
Since last time, I've:
Welded the new floor pan section in,
replaced the rear heel board, and various panels around that area,
Replaced the doorstep
welded the flitch to the floor and surrounding areas to stop water getting in,
A small section of the rear arch has been welded
And I'm currently thinking of a Gloss black mini, and lots of chrome... MMM
A bugger to keep clean, but looks sooooooooo good!
Pictures
As always, comments welcome
Since last time, I've:
Welded the new floor pan section in,
replaced the rear heel board, and various panels around that area,
Replaced the doorstep
welded the flitch to the floor and surrounding areas to stop water getting in,
A small section of the rear arch has been welded
And I'm currently thinking of a Gloss black mini, and lots of chrome... MMM
A bugger to keep clean, but looks sooooooooo good!
Pictures
As always, comments welcome
#79
10K+ Poster!!
Looking good there Nath! Your welding is coming on really well too.