My BMW 320D M Sport (Dyno Update!)
#162
Off the shelf ready to go mate, all I advise is that we get to do the bigger power ones in house so I can personally check them before and after and also tweak the map on a custom basis if needed. Same price £359 for the map
Last edited by James @ M Developments.; 01-11-2012 at 08:44 PM.
#167
PassionFord Post Whore!!
iTrader: (1)
Join Date: Oct 2005
Location: Liverpool
Posts: 5,016
Likes: 0
Received 0 Likes
on
0 Posts
Just the map and a decat downpipe should see 280bhp 430-460lb/ft torques on a 330d. Adding a cooler and a full 3" system should see 290bhp 490lb/ft. We have done a couple now.
#169
I wouldn't put any more than std boost into the map with he std cooler though, I tried on mine and the results were shocking
That said diesels don't need more boost generally for a good remap unless you want the extreme
That said diesels don't need more boost generally for a good remap unless you want the extreme
Last edited by James @ M Developments.; 01-11-2012 at 09:03 PM.
#170
Some guys run them with the back box bypassed with a straight pipe
That would do my head in lol.
Last edited by James @ M Developments.; 01-11-2012 at 09:01 PM.
#176
I've found that life I needed.. It's HERE!!
Impressive power and economy figures; I'd like my E61 177 fetteled by yourselves.................More overtime required I think!
#177
PassionFord Post Whore!!
iTrader: (23)
Thats mental figures, i'm lucky to get 33 mpg urban in the Golf - their must something wrong, i found the exhaust was blowing at the rear joint to the CAT so that was all welded and it seems to be worse on the mpg gauge but the fuel seems to be lasting longer so i'm wondering how accurate this gauge is, i'll have to try and get it down at some point for a check over.
#178
Here's the new E46 320d 60mm core Intercooler kit
I've just ordered all the parts for a big winter service on the old girl, with new glow plugs, belts, thermostat, a pair of rear wheel bearings to get her ready for another winter.
Going to pressure wash the underbody as well to keep it tip top.
Wheels are coming soon I think I'm going 19"
I am really tempted by a 997 Porsche though, so I'm not sure if she will stay next year.I've got an itch I need to scratch, will be nowhere near as good an all rounder as this beauty though.
I've just ordered all the parts for a big winter service on the old girl, with new glow plugs, belts, thermostat, a pair of rear wheel bearings to get her ready for another winter.
Going to pressure wash the underbody as well to keep it tip top.
Wheels are coming soon I think I'm going 19"
I am really tempted by a 997 Porsche though, so I'm not sure if she will stay next year.I've got an itch I need to scratch, will be nowhere near as good an all rounder as this beauty though.
Last edited by James @ M Developments.; 04-11-2012 at 07:07 PM.
#182
Yes I will do one, but it does need the function removed from map as well to prevent the eml flagging an error
You can also remove the EGR function from the map and leave the valve in place, it just stays closed.
You can also remove the EGR function from the map and leave the valve in place, it just stays closed.
Last edited by James @ M Developments.; 04-11-2012 at 07:19 PM.
#187
Im pretty fed up with the driving standards up north, ive had so many close calls having to swerv to avoid people! so, I've just ordered a carcam which is pretty cool!
It's a tiny camera you mount on the windscreen which will automatically record while you drive, the one I have ordered also plots your location and speed via GPS, and shows the g force applied as well as being in full hd
You can just leave it rolling automatically and never touch it, unless you need it, hit the tag button and it saves the file
handy evidence if for example someone drives into you. Revenge will be mine
Also I have all the required cable to connect this to the aux channel on my tv head unit, so I can watch and review the recordings in car.
It's a tiny camera you mount on the windscreen which will automatically record while you drive, the one I have ordered also plots your location and speed via GPS, and shows the g force applied as well as being in full hd
You can just leave it rolling automatically and never touch it, unless you need it, hit the tag button and it saves the file
handy evidence if for example someone drives into you. Revenge will be mine
Also I have all the required cable to connect this to the aux channel on my tv head unit, so I can watch and review the recordings in car.
Last edited by James @ M Developments.; 10-11-2012 at 06:43 PM.
#188
PassionFord Post Whore!!
what cam have you bought James? We have RoadHawks fitted in all of our trucks,
Excellent kit and I have considered fitting one to my car,
Plots your route and auto saves events such as impacts and so on,
Uses GPS to show your speed, how hard you brake and so on, All in HD aswell
Excellent kit and I have considered fitting one to my car,
Plots your route and auto saves events such as impacts and so on,
Uses GPS to show your speed, how hard you brake and so on, All in HD aswell
#190
PassionFord Post Whore!!
The road hawk is quite discreet, Once fitted behind the rear view mirror its hard to spot,
It also doesn't have a screen, its uses a SD card which makes it easy to down load onto the office PC and view whats been going on,
You are able to set the camera up so it shows the vehicle reg on all the data and so on.
Really good pieces of kit, Its the RoadHawk dc-1 we use. very small
It also doesn't have a screen, its uses a SD card which makes it easy to down load onto the office PC and view whats been going on,
You are able to set the camera up so it shows the vehicle reg on all the data and so on.
Really good pieces of kit, Its the RoadHawk dc-1 we use. very small
Last edited by Mark_; 10-11-2012 at 08:13 PM.
#191
I've found that life I needed.. It's HERE!!
Join Date: Mar 2006
Location: Norfolk, UK
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Well worth it if anyone is considering of getting a Roadhawk or similar system (see link for my review if you want to know more about it)
#194
I've found that life I needed.. It's HERE!!
iTrader: (2)
Join Date: Sep 2009
Location: essex
Posts: 1,234
Likes: 0
Received 0 Likes
on
0 Posts
Hi James,
Nice work on the car! I have a few questions surrounding DPF's .
My e60 has covered 45k now, it'll get driven on motorways mostly and sometimes around town/shops etc. Is it advisable to remove the DPF for a remap or could it be remapped with it left on. I can't stand the idea of it chucking out smoke with the DPF removed (btw does yours smoke heavy?)
Many thanks in advance!
Nice work on the car! I have a few questions surrounding DPF's .
My e60 has covered 45k now, it'll get driven on motorways mostly and sometimes around town/shops etc. Is it advisable to remove the DPF for a remap or could it be remapped with it left on. I can't stand the idea of it chucking out smoke with the DPF removed (btw does yours smoke heavy?)
Many thanks in advance!
#196
Hi James,
Nice work on the car! I have a few questions surrounding DPF's .
My e60 has covered 45k now, it'll get driven on motorways mostly and sometimes around town/shops etc. Is it advisable to remove the DPF for a remap or could it be remapped with it left on. I can't stand the idea of it chucking out smoke with the DPF removed (btw does yours smoke heavy?)
Many thanks in advance!
Nice work on the car! I have a few questions surrounding DPF's .
My e60 has covered 45k now, it'll get driven on motorways mostly and sometimes around town/shops etc. Is it advisable to remove the DPF for a remap or could it be remapped with it left on. I can't stand the idea of it chucking out smoke with the DPF removed (btw does yours smoke heavy?)
Many thanks in advance!
Mine doesn't smoke at all, I wouldn't let it be like that, it's still less than 1/3 the limit on the mot smoke test too
#198
Intercooler is now on Sale!
http://www.shop.motorsport-developme...ler-1467-p.asp
If we can get 3-5 people wanting one, i can swing an opening group buy
A silicon hose kit will be available soon.
http://www.shop.motorsport-developme...ler-1467-p.asp
If we can get 3-5 people wanting one, i can swing an opening group buy
A silicon hose kit will be available soon.
Last edited by James @ M Developments.; 20-11-2012 at 10:29 AM.