Gooon2 370bhp shonky old Rover
#1
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Chippenham, Wiltshire
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Gooon2 370bhp shonky old Rover
Folowing on from the Maestro
Day one
As it looks now, almost ready for the weld in roll cage, which I'm not looking forward to fitting (due to arrive in about 10 days)
The cage thats going in
Day one
As it looks now, almost ready for the weld in roll cage, which I'm not looking forward to fitting (due to arrive in about 10 days)
The cage thats going in
Last edited by Ratty; 16-08-2016 at 12:13 PM.
Trending Topics
#10
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Chippenham, Wiltshire
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for no updates, but work is running us both into the ground right now and the car is no where near completion
But the cage is finished
Pedal box fitted
Making up the seat mounts, brake brakets and mockup drive shafts this weekend
It'll be at least 3 months before its out for the first time I'm afraid
The scaffolding
But the cage is finished
Pedal box fitted
Making up the seat mounts, brake brakets and mockup drive shafts this weekend
It'll be at least 3 months before its out for the first time I'm afraid
The scaffolding
Last edited by Ratty; 03-05-2012 at 08:44 AM.
#14
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Chippenham, Wiltshire
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Due to one thing or another its been a long time since I've been able to do any work on the car but today I managed to get down to the unit to have a play with the new suspension.
Avo remotes fitted
Car now looking less like a 4x4
Adjustable top mounts also fitted for a little bit of extra camber
Caliper brakets made and 330mm front brakes now fitted with brembo radials
Avo remotes fitted
Car now looking less like a 4x4
Adjustable top mounts also fitted for a little bit of extra camber
Caliper brakets made and 330mm front brakes now fitted with brembo radials
Last edited by Ratty; 02-04-2015 at 07:54 AM.
#22
Lucifer II - 666
Why doe the wheel well look like it has been cut out and then welded back in?
#33
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Chippenham, Wiltshire
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
M Series manifold modified to take the Cosworth throttle body
And then onto the fuel lines
Still need to tig weld the return line at the 90 bend
And fix the 044 pump and tank
After removing the front of the car including the cross member the RS500 cooler was fitted into place
Then it was time to warm up the TIG and make a water return pipe
Whilst the TIG was out it was time to make the air intake
And then onto the fuel lines
Still need to tig weld the return line at the 90 bend
And fix the 044 pump and tank
After removing the front of the car including the cross member the RS500 cooler was fitted into place
Then it was time to warm up the TIG and make a water return pipe
Whilst the TIG was out it was time to make the air intake
Last edited by Ratty; 02-04-2015 at 07:56 AM.
#34
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Chippenham, Wiltshire
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Finally the MIG was dragged out to knock up some alternator brakets
All fitted into place with MGF hydraulic clutch setup showing
Alternator brackets done and mounted
Electric waper pump going in
Electric power steering pump going in
Last of the boost pipes being fabricated, just the welding to do
Top water hose
Hydraulic clutch done, incorporating coil pack mount
Rear brake lines going in
Quickshift made ready to fit when the box goes back in
Spherical rear top mounts fitted, plus fuel pump wiring and pipe work completed
All fitted into place with MGF hydraulic clutch setup showing
Alternator brackets done and mounted
Electric waper pump going in
Electric power steering pump going in
Last of the boost pipes being fabricated, just the welding to do
Top water hose
Hydraulic clutch done, incorporating coil pack mount
Rear brake lines going in
Quickshift made ready to fit when the box goes back in
Spherical rear top mounts fitted, plus fuel pump wiring and pipe work completed
#35
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Chippenham, Wiltshire
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Whilst playing with wires I decided to replace all the dash gauges for Stack ones
Downpipe closeups
Doors done
Tailgate lightened
Fibreglass bonnet fitted
Front engine mount made up
Oil cooler fitted and connected
Front engine mount fininshed and VibraTechnics installed
I wasn't happy with the pedal box so I cut the floor and bulkhead out, modified the pedal box and moved it all down and forward
Manged to get another 60mm of leg room
Finally started fitting the door cards
Got the car weighed with all remaining parts in the car along with fluids and it came in at 930kg which isn't too bad considering the T16 weight
Downpipe closeups
Doors done
Tailgate lightened
Fibreglass bonnet fitted
Front engine mount made up
Oil cooler fitted and connected
Front engine mount fininshed and VibraTechnics installed
I wasn't happy with the pedal box so I cut the floor and bulkhead out, modified the pedal box and moved it all down and forward
Manged to get another 60mm of leg room
Finally started fitting the door cards
Got the car weighed with all remaining parts in the car along with fluids and it came in at 930kg which isn't too bad considering the T16 weight