1951 chevy pick up hot rod (update26-01-2008)chassis painted
13-01-2008, 07:05 PM
#202
Advanced PassionFord User
Thread Starter
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
rear K member now fully welded, just needs the underside welds dresses.
Need to make a propshaft hoop too, need some 3mm plate for that, the patten is made just need to get out of work and to a sheet metal supplier.
Mounts for the air ride compressor have been removed as they interfeared with one of the braces.
Rear axel is all painted, just needs the rear cover removing, blasting and powder coating - unless I can find a cover on eBay.
Front cross member is also in, wanted to brace it to try and keep some of the twist out of the chassis.
also added these two plates made from 4mm to keep the chassis where I need it.
Parts goint to the powdercoaters tomorrow- all kicks off when they come back!!
13-01-2008, 10:55 PM
#204
I've found that life I needed.. It's HERE!!
Join Date: Oct 2007
Location: Straight outta Essex
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Brilliant
Brilliant
and then some more brilliance!
I am doing (or should I say have been doing) i similar type of thing with a Morris Minor pick up truck!
I really must dig it out and finish it! Although its way down the list at the mo! Still its not going anywhere and will be finished one day even if its a first car for my first born like you 55 bug!
Keep up the good work, amazing fabrication!
Brilliant
and then some more brilliance!
I am doing (or should I say have been doing) i similar type of thing with a Morris Minor pick up truck!
I really must dig it out and finish it! Although its way down the list at the mo! Still its not going anywhere and will be finished one day even if its a first car for my first born like you 55 bug!
Keep up the good work, amazing fabrication!
20-01-2008, 07:15 AM
#210
Advanced PassionFord User
Thread Starter
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by marky_g
thats is amazing i dunno how people do it...start with nothing sorta thing just a bear frame..........grate work mate
Made a new rear cross brace (nothing that interesting) and will be onto the propshaft hoop later, wife permitting.
26-01-2008, 04:35 PM
#211
Advanced PassionFord User
Thread Starter
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
so far, new rear cross brace made from 50x25 to replace manky and bent U section original
then I started into the propshaft hoop, I could have made it from 40mm tube, but instead I started it using 3mm plate cut with a jig saw then boxed it in with a 36mm wide strip of 3mm.
box it all in ang give-it-some with the grinder, its not Boyd Coddington spec, but hey, it's not bad!
1st coat of Por15 on the new section-
now the chassis waits for a second coat of paint, so that's the plan for sunday...
all of the chassis hardware are back from the zinc platers, best Ł40 i've ever spent
with some luck I should have the suspension parts back from the powder coater by the end of the week.
more pictures as and when they happen.
then I started into the propshaft hoop, I could have made it from 40mm tube, but instead I started it using 3mm plate cut with a jig saw then boxed it in with a 36mm wide strip of 3mm.
box it all in ang give-it-some with the grinder, its not Boyd Coddington spec, but hey, it's not bad!
1st coat of Por15 on the new section-
now the chassis waits for a second coat of paint, so that's the plan for sunday...
all of the chassis hardware are back from the zinc platers, best Ł40 i've ever spent
with some luck I should have the suspension parts back from the powder coater by the end of the week.
more pictures as and when they happen.
16-03-2008, 02:06 PM
#216
Shizzle My Nizzle
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
love the project. when i sell my escort cossie, im gna do a yank motor. 500 horses for sod all money.
hows the beetle going on, will be a great first car, my first car was a bug.
nice to see an oval, i just sold my 1949 beetle to buy my escort cos, was a beautiful little car.
ive gone fron 24hp, cabel brakes, semaphore indicators (you know orange sticks) no brake lights, headlight switch was button on floor, use a white metal stick to dip the fuel tank to check level.
to
air con, leather, 240bhp, powersteering, etc.
but id still trade it all back for something old like your truck.
nice to see someone with some skills and not bodging.
hows the beetle going on, will be a great first car, my first car was a bug.
nice to see an oval, i just sold my 1949 beetle to buy my escort cos, was a beautiful little car.
ive gone fron 24hp, cabel brakes, semaphore indicators (you know orange sticks) no brake lights, headlight switch was button on floor, use a white metal stick to dip the fuel tank to check level.
to
air con, leather, 240bhp, powersteering, etc.
but id still trade it all back for something old like your truck.
nice to see someone with some skills and not bodging.
23-03-2008, 09:21 AM
#217
Advanced PassionFord User
Thread Starter
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
Haven't started the beetle yet, I've got a '67 in the garage waiting to get sold before I have the space needed.
All the truck suspesnion parts are powdercoated now, unfortunatly the guy used light grey!
so he's redoing them in the gloss black that I originally ordered and I could have them back for the weekend!
about flippin' time!
engine and gearbox are painted and i'm just going through the Summit web site (WWW.SUMMIT.COM) to get all the silly stuff together
should with some luck, start coming together fairly quickly. Well into a rolling chassis anyway.
All the truck suspesnion parts are powdercoated now, unfortunatly the guy used light grey!
so he's redoing them in the gloss black that I originally ordered and I could have them back for the weekend!
about flippin' time!
engine and gearbox are painted and i'm just going through the Summit web site (WWW.SUMMIT.COM) to get all the silly stuff together
should with some luck, start coming together fairly quickly. Well into a rolling chassis anyway.
06-09-2009, 01:40 PM
#222
Advanced PassionFord User
iTrader: (6)
Join Date: Jun 2003
Location: Cork ,Ireland.
Posts: 2,183
Likes: 0
Received 0 Likes
on
0 Posts
really want to see more of this chip.
please tell me its finished.just back from la and these are at all the cruises.got a few pics and also visited chip fooses shop.now theres a fab shop to die for...lol
rob v
please tell me its finished.just back from la and these are at all the cruises.got a few pics and also visited chip fooses shop.now theres a fab shop to die for...lol
rob v
17-09-2009, 08:51 PM
#223
Advanced PassionFord User
Thread Starter
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
I've waited 6 months for zinc plating this time.
sodding piss take......
will post some more pics as now the chasis is painted, engine and trans in.
nearly rolling
just very busy expanding business so don't get a lot of time spare.
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford Focus RS Parts for Sale.
5
09-03-2016 01:03 PM
