My Focus ST Build Thread 352bhp 435Ib/ft - air filter ducting...
#81
ffoc.co.uk
Amazing car, absolute beast.
#84
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
No idea mate - I dont know much about the graphs - will have a nosey at some old ones
Had quite an in depth chat with some lads on Focus ST forum and some argued about the power and torque not crossing at 5252rpm and I resolved this by rescaling the graph so they had the same values per increment on the y axis;
Cheers for the comments on the build - taking too long for my liking but at least its positive progress
Rob
Had quite an in depth chat with some lads on Focus ST forum and some argued about the power and torque not crossing at 5252rpm and I resolved this by rescaling the graph so they had the same values per increment on the y axis;
Cheers for the comments on the build - taking too long for my liking but at least its positive progress
Rob
#85
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
On all graphs I have from other rolling roads they dont have the same wheel / flywheel rpm either
Mate just had his Escort Cos on the rollers and got 301bhp and 312lb/ft so will try and get a nosey at his graph
Rob
Mate just had his Escort Cos on the rollers and got 301bhp and 312lb/ft so will try and get a nosey at his graph
Rob
#89
#91
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Hoping to get it on this week as not using the car on the road much - just designing a new legal plate I can use
Cant afford to get caught with an illegal plate again or will loose my private plate
Rob
Cant afford to get caught with an illegal plate again or will loose my private plate
Rob
#93
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Nice little upgrade - full mesh bumper grill.
Looks good I think but will redo it to a better standard when time allows as its got 2 cracks were extra mesh piece and framework has been modified
Rob
Looks good I think but will redo it to a better standard when time allows as its got 2 cracks were extra mesh piece and framework has been modified
Rob
#96
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Well parts are going to be stockpiled so can just get the car in and get the bits fitted without stripping down and rebuilding then stripping down again
So todays delivery was;
These are now sitting with these;
Lots more parts to order and stockpile yet
Rob
So todays delivery was;
These are now sitting with these;
Lots more parts to order and stockpile yet
Rob
#97
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Slight update;
Door cards have had some lovely black leather added to replace the hideous standard doorcard fabric
Had it made in 2 pieces of leather with some lovely red stitching seperating the pair;
Rob
Door cards have had some lovely black leather added to replace the hideous standard doorcard fabric
Had it made in 2 pieces of leather with some lovely red stitching seperating the pair;
Rob
#99
ffoc.co.uk
That's some impressive work there. Looks like factory finish. Good work.
#102
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Cheers for the comments gents
The grill is a nightmare - already has 2 cracks in it so going to redo some pieces in fibreglass and see how that turns out.
Going to a different rolling road as not happy with the previous 334bhp reading - think its slightly optimistic. Think its closer to 320bhp with a higher Ib/ft reading.
Previous run was done in 5th not 4th as well
Rob
The grill is a nightmare - already has 2 cracks in it so going to redo some pieces in fibreglass and see how that turns out.
Going to a different rolling road as not happy with the previous 334bhp reading - think its slightly optimistic. Think its closer to 320bhp with a higher Ib/ft reading.
Previous run was done in 5th not 4th as well
Rob
#107
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
the stage 3 upgrade as its known normally makes 305-325bhp. Mine isnt exactly miles over the norm but hey ho
Next target is 400bhp and 400Ib/ft so lets see how it goes
Rob
Next target is 400bhp and 400Ib/ft so lets see how it goes
Rob
#112
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Removed another 8kg of weight today from the ST;
Rear interior light removed then hole filled with carbon sheet
Rear interior is now ready for carpet and carbon sheet
Pics below show current state with no brackets, boltheads, rear seatbelts
Rob
Rear interior light removed then hole filled with carbon sheet
Rear interior is now ready for carpet and carbon sheet
Pics below show current state with no brackets, boltheads, rear seatbelts
Rob
#115
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Yeah mine has a rear interior light - or did have
Just checked for Etis and found it listed as;
'Rear Overhead Courtesy Lamp'
Looking at other seats but not to fussed as the standard Recaros might be heavy but are great compromise between road and track use.
Rob
Just checked for Etis and found it listed as;
'Rear Overhead Courtesy Lamp'
Looking at other seats but not to fussed as the standard Recaros might be heavy but are great compromise between road and track use.
Rob
#118
PassionFord Post Whore!!
#120
Boosting around the NE
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Todays progress;
> Pollen filter change
> New air filter (the monster one )
> General tody up of interior
> Remade the front bumper air ducts
In process of being ordered;
- Quaife ATB
- Uprated Timken diff bearings
- RS flywheel, clutch, pressure plate
- Whiteline 24mm front ARB
- Whiteline 24mm rear ARB
- Whiteline rear droplinks
- Yoko AD08 tyres
Anyway pics of todays work;
Rob
> Pollen filter change
> New air filter (the monster one )
> General tody up of interior
> Remade the front bumper air ducts
In process of being ordered;
- Quaife ATB
- Uprated Timken diff bearings
- RS flywheel, clutch, pressure plate
- Whiteline 24mm front ARB
- Whiteline 24mm rear ARB
- Whiteline rear droplinks
- Yoko AD08 tyres
Anyway pics of todays work;
Rob