Track saphhire
#122
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well a nice box turned up to day
GPA AP 4 pots and 355mm discs
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0260.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0259.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0258.jpg)
The discs are OK condishion calipers are good nick to
I have got some GRP A front hubs and lower arms,comp struts,compleat off a car just need to pay for them now
but now I have made two problems
1.standard drive shafts don't fit
2.my ohlins are standard fit ...............
never easy
GPA AP 4 pots and 355mm discs
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0260.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0259.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0258.jpg)
The discs are OK condishion calipers are good nick to
I have got some GRP A front hubs and lower arms,comp struts,compleat off a car just need to pay for them now
but now I have made two problems
1.standard drive shafts don't fit
2.my ohlins are standard fit ...............
never easy
#125
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
well I'm well it to the wiring now.Got all the unwanted bits out and am ready to put power to the loom and see if it all works.
I am keeping the heated front screen and have taken that out of the loom and am powering it separately to keep it neat and tidy
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0267.jpg)
I am hiding most of the main loom under the dash and not in the engine as the battery will be in the car now, I want a neat engine bay
The front light/horn/indicators will have bulk head plugs and run n/s-o/s of the turrets
whats left of the body loom
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0266.jpg)
New engine loom,coilpack ....
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0263.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0262.jpg)
cam trigger
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0265.jpg)
dizzy blank
I am keeping the heated front screen and have taken that out of the loom and am powering it separately to keep it neat and tidy
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0267.jpg)
I am hiding most of the main loom under the dash and not in the engine as the battery will be in the car now, I want a neat engine bay
The front light/horn/indicators will have bulk head plugs and run n/s-o/s of the turrets
whats left of the body loom
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0266.jpg)
New engine loom,coilpack ....
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0263.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0262.jpg)
cam trigger
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0265.jpg)
dizzy blank
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0264.jpg)
#128
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I'm not sure about the carbon console as I can't make it fit anywhere
It looks odd how ever you put it,it don't seem to fit on the tunnel right?
So will make a alloy one and get it flocked
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
So will make a alloy one and get it flocked
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0261.jpg)
#134
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well I have been so busy at work that I have done bugger all on the car,apart from laying the stripped and working body loom in the car.I sold my Öhlins shocks and now need grp a fitment ones
I had a parcel today
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0596.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0597.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0598.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0599.jpg)
Compleat GRP A front end
I have fallen in love with this car and the wheels
![](http://i131.photobucket.com/albums/p286/brettski165/PICT2094.jpg)
What do you all think ...It is copying but I love it
I have found a lad that makes rally roof flaps same as the grp a sapphire they look nicely made and i have on sun roof so thinking of getting a pair?
Shall I ......
I had a parcel today
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0596.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0597.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0598.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0599.jpg)
Compleat GRP A front end
I have fallen in love with this car and the wheels
![](http://i131.photobucket.com/albums/p286/brettski165/PICT2094.jpg)
What do you all think ...It is copying but I love it
I have found a lad that makes rally roof flaps same as the grp a sapphire they look nicely made and i have on sun roof so thinking of getting a pair?
Shall I ......
#136
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
The saff with the oz on is'nt mine I stole the pic
but mine is white and I want the wheel BAD
I have looked round you car at shows this year,even 3 or 4 times on the same day!!
It is stunning
![Red Faced](https://passionford.com/forum/images/smilies/icon_redface.gif)
I have looked round you car at shows this year,even 3 or 4 times on the same day!!
It is stunning
#138
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hi all had last night in the shed and made up the front lights and indicators/horn loom It went very well I think.It will plug in a bulkhead twist fitting
I have done the rear light loom last weekend and it is all braided the same and runs though up the roof and pillars.
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0608.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0607.jpg)
I have done the rear light loom last weekend and it is all braided the same and runs though up the roof and pillars.
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0608.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0607.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0609.jpg)
#141
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Absolutey cracking build. You've certainly got all the right bits for this car and it will be very enviable when its on the road.
I would guess that the one above with the OZ's on is a foreign car and thats why you've not spotted it at the shows? Norway/Sweden maybe??
I would guess that the one above with the OZ's on is a foreign car and thats why you've not spotted it at the shows? Norway/Sweden maybe??
#144
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hi there I am still getting parts for the rear so will put pictures up soon![Top](https://passionford.com/forum/images/smilies/smile011.gif)
but I have
stage 3 race beam/arms
ohlins 3 way suspension
alloy beam mounts
grp a bladed anti roll bar
grp a ap 315 discs 4 pots
Not got the brakes yet no money now
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
but I have
stage 3 race beam/arms
ohlins 3 way suspension
alloy beam mounts
grp a bladed anti roll bar
grp a ap 315 discs 4 pots
Not got the brakes yet no money now
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
#145
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks all very much for the kind words
I have nealy finished the body loom and all the wiring,then it will be all the nice bits wwwwwwwweeeeeeeeeee
I have nealy finished the body loom and all the wiring,then it will be all the nice bits wwwwwwwweeeeeeeeeee
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#148
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hi I fitted the front lighting loom last night I think it when in nicely
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0611.jpg)
Also fitted the charging loom
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0612.jpg)
I threaded the battery lead thought the n/s sill but was worried if I get hit/crash and it getting cut and coursing a fire got some protection to go round it .sorry the pic is on the piss
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0613.jpg)
The rear light loom is fitted and wired up I put that thought the roof pillow on the o/s
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0617.jpg)
Now its the fuses and relays,I cut a load of relay holders and the board that holds them out of an old bus dash at work and got a bag of new pins to re pin them to get rid of the ford stuff,bit of a mess at the Mo but will tidy that up soon
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0614.jpg)
new center consol we made up this will get flocked same as the dash
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0611.jpg)
Also fitted the charging loom
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0612.jpg)
I threaded the battery lead thought the n/s sill but was worried if I get hit/crash and it getting cut and coursing a fire got some protection to go round it .sorry the pic is on the piss
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0613.jpg)
The rear light loom is fitted and wired up I put that thought the roof pillow on the o/s
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0617.jpg)
Now its the fuses and relays,I cut a load of relay holders and the board that holds them out of an old bus dash at work and got a bag of new pins to re pin them to get rid of the ford stuff,bit of a mess at the Mo but will tidy that up soon
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0614.jpg)
new center consol we made up this will get flocked same as the dash
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0618.jpg)
#156
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I drove down to summerset today to pick up the new olines grp a 3 ways left home at 5.00am back at 14.15pm :thumbsup: but the car looks like this now
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0624.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0623.jpg)
It was clean when I went :thumbsup:
Shock seem good but the springs are scruffy they can be painted.Top mounts where too tight to get off and didn't want to bugger up with grips so they will be posted on
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0620.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0621.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0622.jpg)
Just need the rear beam off mike rainbird "
"and can start putting it back together
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0624.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0623.jpg)
It was clean when I went :thumbsup:
Shock seem good but the springs are scruffy they can be painted.Top mounts where too tight to get off and didn't want to bugger up with grips so they will be posted on
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0620.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0621.jpg)
![](http://i131.photobucket.com/albums/p286/brettski165/SAM_0622.jpg)
Just need the rear beam off mike rainbird "
![](https://passionford.com/forum/images/smilies/salut.gif)
#160
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well I'm fucked off now.Over night one off the front shocks has weeped oil on the floor bugger!its coming from where the pipe goes on to the shock "not the bandjo the swivle bit
I have a mate that sells/rebuilds ohlins bike shocks he'll will look at it for me but has never done car stuff
I checked it over for 15 min and all seemed ok well pissed off
I have a mate that sells/rebuilds ohlins bike shocks he'll will look at it for me but has never done car stuff
I checked it over for 15 min and all seemed ok well pissed off