Track saphhire
#84
Brett,
Nice work.
This is almost the identical project to mine that I never finished four years ago, even down to the paint scheme.
I also had Group A engine mounts, but a word of warning. In my experience, these wouldn't allow me to fit my engine with a 2wd exhaust manifold - maybe something to consider...
Nice work.
This is almost the identical project to mine that I never finished four years ago, even down to the paint scheme.
I also had Group A engine mounts, but a word of warning. In my experience, these wouldn't allow me to fit my engine with a 2wd exhaust manifold - maybe something to consider...
#87
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Brett,
Nice work.
This is almost the identical project to mine that I never finished four years ago, even down to the paint scheme.
I also had Group A engine mounts, but a word of warning. In my experience, these wouldn't allow me to fit my engine with a 2wd exhaust manifold - maybe something to consider...
Nice work.
This is almost the identical project to mine that I never finished four years ago, even down to the paint scheme.
I also had Group A engine mounts, but a word of warning. In my experience, these wouldn't allow me to fit my engine with a 2wd exhaust manifold - maybe something to consider...
I have'nt thought that far ahead really where did you go
#89
Brett,
Take a look at my old restoration thread:
https://passionford.com/forum/restor...-for-sale.html
Might be some ideas in there for you.....
Take a look at my old restoration thread:
https://passionford.com/forum/restor...-for-sale.html
Might be some ideas in there for you.....
#90
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Brett,
Take a look at my old restoration thread:
https://passionford.com/forum/restor...-for-sale.html
Might be some ideas in there for you.....
Take a look at my old restoration thread:
https://passionford.com/forum/restor...-for-sale.html
Might be some ideas in there for you.....
#91
#93
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Its home and I think I am happy with it?.Some of the sand from when I sand blasted it has fallen in to the paint when he turned it over on the spit, witch is a bugger but its not to bad I'll live :BangHead:
#99
Too many posts.. I need a life!!
#103
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
I and a freind picked this up at a nice price last week from a mate who hit the curb sideway very hard
H reg 4x4 in hit the n/s but put a crease in the drivers side
H reg 4x4 in hit the n/s but put a crease in the drivers side
Last edited by Brettski mk2; 29-07-2010 at 04:30 PM.
#105
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
I have ran out of talent on my wiring loom I have sripped most of the unwanted out but now just need a bit of help to finish it off,a point in the right direction by someone electrically minded
The wiring dirgrams i have ant quite right
So anyone want to pop over and have a look with me to get it finished I'm abit fed up now
I'll buy you a pub lunch and a pint May be a bit of fuel
Brett
The wiring dirgrams i have ant quite right
So anyone want to pop over and have a look with me to get it finished I'm abit fed up now
I'll buy you a pub lunch and a pint May be a bit of fuel
Brett
#106
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
These finally turned up been after a set for 9 months :thumbsup: there as new
Have some grp A front hubs/bottom arms/comp struts on the way probably take months as well :BangHead:
Have some grp A front hubs/bottom arms/comp struts on the way probably take months as well :BangHead:
#114
Too many posts.. I need a life!!
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Had all morning in the shed and started fitting parts and brackets back on to the shell
the bumpers and side skirts are back from the painters now so I got 35 plastic covered rivits from ford to fit the skirts back on £15 for 35 of them!
also mocked up a wheel
Wednesday night we fitted the dash round the cage this was a put it in.....take it out job!!
Mocked up a door and carbon door card
Last sunday I went up to Newcastle and bought a k plate silver rolling shell saph off Ben
So we will make one car from two
the bumpers and side skirts are back from the painters now so I got 35 plastic covered rivits from ford to fit the skirts back on £15 for 35 of them!
also mocked up a wheel
Wednesday night we fitted the dash round the cage this was a put it in.....take it out job!!
Mocked up a door and carbon door card
Last sunday I went up to Newcastle and bought a k plate silver rolling shell saph off Ben
So we will make one car from two
#118
Zee Germans are coming