MK2 Orion RS1800i zetec. . . 16X8 Comp TH's and on its ar*e
#84
PassionFord Post Whore!!
Thread Starter
#85
PassionFord Post Whore!!
Thread Starter
#86
Regular Contributor
Join Date: Sep 2008
Location: bollock deep in walsall
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
#90
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Not had anytime on the Orion for a couple of weeks due to work and sorting other peoples cars out ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
I have however managed to paint most of the inside of the Orion with a roller![Top](https://passionford.com/forum/images/smilies/smile011.gif)
The engine for my other Orion is coming together nicely now![](https://passionford.com/forum/images/smilies/shocked.gif)
![](http://img38.imageshack.us/img38/6579/1000824b.jpg)
![](http://img35.imageshack.us/img35/299/1000826c.jpg)
Still a couple of holes in the wheel well to sort but its cleaned it up no end![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://img689.imageshack.us/img689/9324/1000827f.jpg)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
I have however managed to paint most of the inside of the Orion with a roller
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
The engine for my other Orion is coming together nicely now
![](https://passionford.com/forum/images/smilies/shocked.gif)
![](http://img38.imageshack.us/img38/6579/1000824b.jpg)
![](http://img35.imageshack.us/img35/299/1000826c.jpg)
Still a couple of holes in the wheel well to sort but its cleaned it up no end
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://img689.imageshack.us/img689/9324/1000827f.jpg)
![](http://img32.imageshack.us/img32/6257/1000829b.jpg)
#92
PassionFord Post Whore!!
Thread Starter
#93
chatter 4 life
iTrader: (5)
Join Date: Sep 2004
Location: northallerton
Posts: 2,490
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ah right, diffrent, never seen it done to a 5 door or a orion,
u don't have 4 kick panels do u that run down the car that hold the carpet in, some 1 painted our lasses blue before we got the car and i hate them
u don't have 4 kick panels do u that run down the car that hold the carpet in, some 1 painted our lasses blue before we got the car and i hate them
#94
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Wanna keep the set for this incase I change my mind over winter, will have a dig out in the garage for you though, might have something
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#95
PassionFord Post Whore!!
Thread Starter
#97
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ZT wont be far off
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#100
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Beginning of the week started off with good intensions to rip in and get Pov built and running. . .
As the weeks gone on I've felt worse and worse, real bad man flu or swine flu. . . haven't bothered going the docs, its a right pain trying to get a appointment and they wont do owt . . .
Anyway a few pics of alittle progress. should be running for next weekend now
![](http://img341.imageshack.us/img341/8163/dsc00053p.jpg)
Started stone chipping the underside
Dunno why just think it'll protect it and it'll look better. Dont do things by half here, its all or nothing lol
![](http://img20.imageshack.us/img20/1340/dsc00054em.jpg)
Still got a few repairs to sort on the wheel well hence not all stone chipped
![](http://img121.imageshack.us/img121/8660/dsc00055f.jpg)
When it goes for MOT im gonna take a couple more tins of stone chip and while he's not looking touch in any missed areas, its akward doing this at home on the floor
![](http://img7.imageshack.us/img7/3640/dsc00057bb.jpg)
Maybe I was abit rough when I cut the springs down
![](http://img20.imageshack.us/img20/8857/dsc00058tz.jpg)
Borrowed the rug doctor from Focus the other week, misses wanted the carpets cleaned in the house, I just wanted to clean the 90's spec up lol :mrgreen:
![](http://img228.imageshack.us/img228/1337/dsc00059ch.jpg)
![](http://img228.imageshack.us/img228/6176/dsc00060i.jpg)
![](http://img121.imageshack.us/img121/9645/dsc00061i.jpg)
Had a reducer made up at work in the week, so I use the standard water pipe coming off the zetec water pump 4.5cm bore, which then reduces to 3cm bore so I can then use the standard CVH water pipe which allow good clearance round the alternator
Abit mixed and match but should work a treat and cost me 50p for a can of pop lol :mrgreen:
![](http://img7.imageshack.us/img7/1218/dsc00062rh.jpg)
Just a couple of arty wanna be shots . . . Not bad for a phone camera
![](http://img20.imageshack.us/img20/1536/dsc00063it.jpg)
As the weeks gone on I've felt worse and worse, real bad man flu or swine flu. . . haven't bothered going the docs, its a right pain trying to get a appointment and they wont do owt . . .
Anyway a few pics of alittle progress. should be running for next weekend now
![LOL](https://passionford.com/forum/images/smilies/icon_lol.gif)
![](http://img341.imageshack.us/img341/8163/dsc00053p.jpg)
Started stone chipping the underside
![LOL](https://passionford.com/forum/images/smilies/icon_lol.gif)
![LOL](https://passionford.com/forum/images/smilies/icon_lol.gif)
![](http://img20.imageshack.us/img20/1340/dsc00054em.jpg)
Still got a few repairs to sort on the wheel well hence not all stone chipped
![](https://passionford.com/forum/images/smilies/wink.gif)
![](http://img121.imageshack.us/img121/8660/dsc00055f.jpg)
When it goes for MOT im gonna take a couple more tins of stone chip and while he's not looking touch in any missed areas, its akward doing this at home on the floor
![LOL](https://passionford.com/forum/images/smilies/icon_lol.gif)
![](http://img7.imageshack.us/img7/3640/dsc00057bb.jpg)
Maybe I was abit rough when I cut the springs down
![LOL](https://passionford.com/forum/images/smilies/icon_lol.gif)
![](http://img20.imageshack.us/img20/8857/dsc00058tz.jpg)
Borrowed the rug doctor from Focus the other week, misses wanted the carpets cleaned in the house, I just wanted to clean the 90's spec up lol :mrgreen:
![](http://img228.imageshack.us/img228/1337/dsc00059ch.jpg)
![](http://img228.imageshack.us/img228/6176/dsc00060i.jpg)
![](http://img121.imageshack.us/img121/9645/dsc00061i.jpg)
Had a reducer made up at work in the week, so I use the standard water pipe coming off the zetec water pump 4.5cm bore, which then reduces to 3cm bore so I can then use the standard CVH water pipe which allow good clearance round the alternator
![](https://passionford.com/forum/images/smilies/wink.gif)
![](http://img7.imageshack.us/img7/1218/dsc00062rh.jpg)
Just a couple of arty wanna be shots . . . Not bad for a phone camera
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://img20.imageshack.us/img20/1536/dsc00063it.jpg)
![](http://img7.imageshack.us/img7/5527/dsc00064qn.jpg)
#107
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Was a unknown number so didnt reply lol
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
Felt to ill to look at the wiring mate, will give you a bell this week coming if your about???
As for a missed call notification at 1203 am, I never rung you at that hour mate, your phone must have had a delayed notification through
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#109
PassionFord Post Whore!!
Thread Starter
#110
Regular Contributor
iTrader: (1)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Was a unknown number so didnt reply lol ![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
Felt to ill to look at the wiring mate, will give you a bell this week coming if your about???
As for a missed call notification at 1203 am, I never rung you at that hour mate, your phone must have had a delayed notification through
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
Felt to ill to look at the wiring mate, will give you a bell this week coming if your about???
As for a missed call notification at 1203 am, I never rung you at that hour mate, your phone must have had a delayed notification through
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
Mart
#111
PassionFord Post Whore!!
Thread Starter
#112
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
POV got towed the other night to my mates garage to make the exhaust up 8) So far. . . . Modded the tailpipe, downpipe made up, and sourced another exhaust manifold with egr blanked off with proper allen key bolts.
![](http://img12.imageshack.us/img12/7504/dsc00079ze.jpg)
![](http://img686.imageshack.us/img686/1038/dsc00077r.jpg)
Only a couple of quick pics for now, one with the standard Focus RS tailpipe welded to a standard orion 1600i system, looks suttle . . . should be quiet which is how I want this one.
Downpipe made up, bought new exhaust hangers so its a nice tight fit to the floor and dont move :mrgreen: Its not far off running now :mrgreen: Cant wait
![](http://img190.imageshack.us/img190/8893/dsc00080wp.jpg)
Just fuel pump to hang while its on the ramps
Better pics soon
![](http://img12.imageshack.us/img12/7504/dsc00079ze.jpg)
![](http://img686.imageshack.us/img686/1038/dsc00077r.jpg)
Only a couple of quick pics for now, one with the standard Focus RS tailpipe welded to a standard orion 1600i system, looks suttle . . . should be quiet which is how I want this one.
Downpipe made up, bought new exhaust hangers so its a nice tight fit to the floor and dont move :mrgreen: Its not far off running now :mrgreen: Cant wait
![](http://img190.imageshack.us/img190/8893/dsc00080wp.jpg)
Just fuel pump to hang while its on the ramps
![](https://passionford.com/forum/images/smilies/wink.gif)
Last edited by slammedorion; 08-12-2009 at 10:27 PM.
#115
PassionFord Post Whore!!
Thread Starter
#118
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Throttle cable sourced and fitted, new plugs and leads fitted, all hoses fitted and red coolent put in :mrgreen: , rad fan cowling fitted, breather pipes fitted, air intake fitted along with a £30 quid Ramair induction kit . . .
Bargain .
![](http://img514.imageshack.us/img514/1397/1000926.jpg)
![](http://img689.imageshack.us/img689/5701/1000928i.jpg)
![](http://img198.imageshack.us/img198/725/1000930c.jpg)
![](http://img686.imageshack.us/img686/244/1000932.jpg)
![](http://img97.imageshack.us/img97/2576/1000933.jpg)
![](http://img689.imageshack.us/img689/4937/1000934.jpg)
1 new black Ford badge fitted
![](http://img130.imageshack.us/img130/1682/1000937g.jpg)
Found these Ford mats
will do the job nicely :mrgreen:
![](https://passionford.com/forum/images/smilies/wink.gif)
![](http://img514.imageshack.us/img514/1397/1000926.jpg)
![](http://img689.imageshack.us/img689/5701/1000928i.jpg)
![](http://img198.imageshack.us/img198/725/1000930c.jpg)
![](http://img686.imageshack.us/img686/244/1000932.jpg)
![](http://img97.imageshack.us/img97/2576/1000933.jpg)
![](http://img689.imageshack.us/img689/4937/1000934.jpg)
1 new black Ford badge fitted
![](http://img130.imageshack.us/img130/1682/1000937g.jpg)
Found these Ford mats
![LOL](https://passionford.com/forum/images/smilies/icon_lol.gif)
![](http://img35.imageshack.us/img35/5589/1000919l.jpg)
Last edited by slammedorion; 14-12-2009 at 10:41 PM.
#120
PassionFord Post Whore!!
Thread Starter