2ltr ZT mk5 escort build update 07/02/11
#82
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
get more satisfaction doing it yaself...!?! although i'v had a fair amount of help of my mate, so i cant take all the glory
but yeh using a blacktop engine
but yeh using a blacktop engine
Last edited by tezmanian devil; 18-11-2009 at 10:05 PM.
#83
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
bit of an update...
got my feul rail, fuelab filter and pressure reg back from south coast performance finally as they needed to make and adaptor so my earl's fitting's would fit the fuel rail...
anyway, here's some pic's of them fitted...
can see in the first pic how tight it is between the tb and the brake res, but i'v got a plan for getting round that... hopfully lol
pic of where the black top sump get's in the way of fitting the starter motor
and it's also in the way of the drive shaft on the back
new cossy t34
then i went abit picture mad testing my camera out and took a few random one's...
got my bumper back aswel as my mate that was going to mod it is moving house, so thought it would be best to get it out of he's way for time being
put the splitter up against it so you can see how much bigger it is to a mk5 bumper...
and i couldn't resist fitting it to see how it all look's, need to cut and extend the bumper to make it tie in with the arch's, and cut out the middle like my last one, but this give's you an idea of roughly how it will look
that's all for now
got my feul rail, fuelab filter and pressure reg back from south coast performance finally as they needed to make and adaptor so my earl's fitting's would fit the fuel rail...
anyway, here's some pic's of them fitted...
can see in the first pic how tight it is between the tb and the brake res, but i'v got a plan for getting round that... hopfully lol
pic of where the black top sump get's in the way of fitting the starter motor
and it's also in the way of the drive shaft on the back
new cossy t34
then i went abit picture mad testing my camera out and took a few random one's...
got my bumper back aswel as my mate that was going to mod it is moving house, so thought it would be best to get it out of he's way for time being
put the splitter up against it so you can see how much bigger it is to a mk5 bumper...
and i couldn't resist fitting it to see how it all look's, need to cut and extend the bumper to make it tie in with the arch's, and cut out the middle like my last one, but this give's you an idea of roughly how it will look
that's all for now
#89
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
sorry dude, bonnet's staying, i prefer it to a normal buldge bonnet and grill, and it add's the mean/aggressive look im going for
i think you should have a go with the splitter and sell me the rubber one you have :thumbsup:
seriously though, how much do you want for your splitter, i'll give you what you paid + 100
i think you should have a go with the splitter and sell me the rubber one you have :thumbsup:
seriously though, how much do you want for your splitter, i'll give you what you paid + 100
#91
B1mbo
iTrader: (1)
sorry dude, bonnet's staying, i prefer it to a normal buldge bonnet and grill, and it add's the mean/aggressive look im going for
i think you should have a go with the splitter and sell me the rubber one you have :thumbsup:
seriously though, how much do you want for your splitter, i'll give you what you paid + 100
i think you should have a go with the splitter and sell me the rubber one you have :thumbsup:
seriously though, how much do you want for your splitter, i'll give you what you paid + 100
really want this splitter dont ya na i couldnt part with it, it just completes my front end, if the other one was half easy to fit i would and part with the rubber, bit its just soo much work
if i can get a cheap rs2k bumper in red i might send them to a friend to get modded for the other splitter, ill give you a shout if it ever happens and mines for sale
#92
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
really want this splitter dont ya na i couldnt part with it, it just completes my front end, if the other one was half easy to fit i would and part with the rubber, bit its just soo much work
if i can get a cheap rs2k bumper in red i might send them to a friend to get modded for the other splitter, ill give you a shout if it ever happens and mines for sale
if i can get a cheap rs2k bumper in red i might send them to a friend to get modded for the other splitter, ill give you a shout if it ever happens and mines for sale
i'd love you forever if you could sell it to me, surly that alone make's you want to lol
#97
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.co.uk/TPI-alloy-whee...item5633ab69bd
the one's pictured are different to the one's i have though, but same sort of thing...
#98
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
im not to sure when it'll be on the road really, dont want to say just incase i jynx myself... would like to have it done by ford fair though, that way i can give it a blast round the track providing it's run in and mapped properly by then... can only keep my finger's crossed for the time being.
#99
Lucifer II - 666
Looks great bud and can't believe I'm saying it but the bad boy bonnet works for me
#101
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
can anyone tell me where i can get the braided wireing sleveing(sp?) stuff from?
want to try and do some of my engine wireing harness soon, but want to wrap it with the braided stuff so it can look as neat as pos...
any help would be awesome!!
want to try and do some of my engine wireing harness soon, but want to wrap it with the braided stuff so it can look as neat as pos...
any help would be awesome!!
#108
PassionFord Regular
iTrader: (1)
Join Date: May 2009
Location: eastbourne
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
you tithead ive got a fiesta not an escort!!lol and speaking of help i need a lift with the 2ltr lump for the fez on the weekend if you can. and ill give you a hand doing the exhaust and fitting electrical stuff so i can start the wiring, i wana hear it run!!!!
#109
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
thought i'd type fiesta, doh lol
yeh can give ya a hand with the lump, having a drink tonight for kat's birthday, which could possibly turn into abit of a heavy one, so i dout i'll be about befour mid day lol
need to get the esc cos rad and my nice shiney i/c mounted up tomorrow hopfully, need to fab some bracket's out of something though...? you got any decent bracket making fodder?
i CANNOT wait until she's running, not far off now i dont think
bell me tomorrow anyway bod, havn't been arsed to get any credit
#111
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
that would be a good idea, but once i chop my bumper it'll be blaitant there's an intercooler behind it
might give it ago anyway, if it look's pant's i'll just spin it back round to nice shiney alloy
might give it ago anyway, if it look's pant's i'll just spin it back round to nice shiney alloy
#113
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
where the middle hole is on the bumper, im just chopping that out abit more... like this...
but i wont be doing the hole's either side of the centre one this time because that was a night mare
need to extend the bumper somehow aswel so it tie's in with the wider cossy arch's, god no's what im going to do about that...??
but i wont be doing the hole's either side of the centre one this time because that was a night mare
need to extend the bumper somehow aswel so it tie's in with the wider cossy arch's, god no's what im going to do about that...??
#117
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
just have to get my bigger hammer out i think lol
#119
PassionFord Regular
iTrader: (1)
Join Date: May 2009
Location: eastbourne
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
its only got to go a tiny bit
as for my welder i didnt break it the shroud is fuked from constant use ive got hiq, au, south coast, me , and you using it now coz its just an awsome welder "snap on only the best!!!"
#120
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (8)
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
snobby git with ya flash tool's
got all the intercooler/boost pipe stuff plumbed in properly today look's
just need you to sort the wireing now, so i can bolt in all in properly, you got another welder tip thing yet?
got all the intercooler/boost pipe stuff plumbed in properly today look's
just need you to sort the wireing now, so i can bolt in all in properly, you got another welder tip thing yet?