Engine Management
#1
Sam
Thread Starter
Join Date: Apr 2009
Location: Hayes (middlesex)
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Engine Management
hi peeps i've got a mk3 fiesta XR2i with a 1.8 zetec out of an RS1800 fiesta with a turbo technics T3 and i would like to go for aftermarket management which mangement do you guys think i should go for????
i've had a look at Omex , Emerald, Megasquirt but there all offering different things which one should i go for???
thanks Sam
i've had a look at Omex , Emerald, Megasquirt but there all offering different things which one should i go for???
thanks Sam
#4
*** Sierra RS Custard ***
iTrader: (3)
Autornic SM4 then in my personal opinion having mapped that and all of the ones that you mention its just miles better to work with.
Contact MA Developments, not sure on exact price but I would imagine including making a loom and fitting it and mapping etc it would probably be in the 3K ballpark or so.
Or if you like DIY, I made my own loom from a cut up old one and a new plug, and got a secondhand SM4 for 900 quid, so managed it for about a grand and it only cost me 50 quid in fuel to map it
Contact MA Developments, not sure on exact price but I would imagine including making a loom and fitting it and mapping etc it would probably be in the 3K ballpark or so.
Or if you like DIY, I made my own loom from a cut up old one and a new plug, and got a secondhand SM4 for 900 quid, so managed it for about a grand and it only cost me 50 quid in fuel to map it
#6
*** Sierra RS Custard ***
iTrader: (3)
The 1.07 can be brought up to 1.09 spec for very little money, its just a chip change, mine was a 1.05 when I got it but MA Developments supplied me with an upgrade chip for it to take it to 1.09, although I am not sure if they would be willing to help with a "grey import" one or not.
The 1.09 is awesome, its got built in osciliscopes for seeing the crank and cam sensors, and has traction control and launch control.
The 1.09 is awesome, its got built in osciliscopes for seeing the crank and cam sensors, and has traction control and launch control.
#7
The 1.07 can be brought up to 1.09 spec for very little money, its just a chip change, mine was a 1.05 when I got it but MA Developments supplied me with an upgrade chip for it to take it to 1.09, although I am not sure if they would be willing to help with a "grey import" one or not.
The 1.09 is awesome, its got built in osciliscopes for seeing the crank and cam sensors, and has traction control and launch control.
The 1.09 is awesome, its got built in osciliscopes for seeing the crank and cam sensors, and has traction control and launch control.
i'm over in melbourne chip, still! lol, been meaning to get it upgraded
Trending Topics
#12
Thread
Thread Starter
Forum
Replies
Last Post
Stu @ M Developments
General Car Related Discussion.
41
21-08-2015 06:47 AM