BEEFY'S s1 cos- tues 1-5-2012 Project now for sale , breaking -
#2692
Lucifer II - 666
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I hate the word when it is used on the internet or in real life but I would forgive anyone for typing out "epic" in reply to those pic's.
Credit to you and K, well done.
Credit to you and K, well done.
#2697
![Default](https://passionford.com/forum/images/icons/icon1.gif)
thanks for all the warm comments folks ,
nice to see warren still gracing us meer mortals with his presence lol
anyway , got to give a big thanks to gary richardson , aka escosgaz ,
came down today to view the car with regards to painting the outside , got the feeling he likes the project , so it looks like its going up to him for the panels and exterior to be done ,
spesh will be prepping and painting the kit n bumpers ,
anyway
cars now looking like this ,
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11001.jpg)
bay all wrapped up
attention will be turned to this
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11002.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11003.jpg)
little bit of sanding to do , and then a coat of primer and a lick of paint
ohh and the kits made its way to karls ,
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11004.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11006.jpg)
on inspection the majority of it is good enough ,
not 100% happy with the spoiler , has alot of cracks , dont think theres any easy way to properly repair it ,
and the front arches have been trimmed back
so im on the look out for a vgc or mint s1 spoiler and a pair or front arches ,
so if you can help , let me know
ohh and these arrived
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11008.jpg)
the full kit , and any interior and engine bay fixings will be riv-nutted and a proper stainless fixing used ,
cannot stand the course threaded fixings ford used they pull and fuck the holes - eventually pulling loose
beef
nice to see warren still gracing us meer mortals with his presence lol
anyway , got to give a big thanks to gary richardson , aka escosgaz ,
came down today to view the car with regards to painting the outside , got the feeling he likes the project , so it looks like its going up to him for the panels and exterior to be done ,
spesh will be prepping and painting the kit n bumpers ,
anyway
cars now looking like this ,
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11001.jpg)
bay all wrapped up
attention will be turned to this
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11002.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11003.jpg)
little bit of sanding to do , and then a coat of primer and a lick of paint
ohh and the kits made its way to karls ,
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11004.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11006.jpg)
on inspection the majority of it is good enough ,
not 100% happy with the spoiler , has alot of cracks , dont think theres any easy way to properly repair it ,
and the front arches have been trimmed back
so im on the look out for a vgc or mint s1 spoiler and a pair or front arches ,
so if you can help , let me know
ohh and these arrived
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11008.jpg)
the full kit , and any interior and engine bay fixings will be riv-nutted and a proper stainless fixing used ,
cannot stand the course threaded fixings ford used they pull and fuck the holes - eventually pulling loose
beef
Last edited by -beefy-; 21-01-2011 at 09:50 PM.
#2698
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,762
Received 1,044 Likes
on
998 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looking good Beef.I can see this car been closed to being finished just in time for central day.I think you should take it on a trailer so people can have a good look at the work You and Karl have put into it.
#2700
![Default](https://passionford.com/forum/images/icons/icon1.gif)
thats the plan glenn ,
but when u say finished , i hope u mean paintwise lol ,
certainly wont be complete !!!!
saying that , me and the missus just put a application in on a new house , so once it leaves karls it may go on the back burner for a cpl months ,
tbh my prioritys are in making sure anne maries happy and we have a warm comfortable secure house for the upcoming baby ,
DOES COME WITH A GARAGE THOUGH
but when u say finished , i hope u mean paintwise lol ,
certainly wont be complete !!!!
saying that , me and the missus just put a application in on a new house , so once it leaves karls it may go on the back burner for a cpl months ,
tbh my prioritys are in making sure anne maries happy and we have a warm comfortable secure house for the upcoming baby ,
DOES COME WITH A GARAGE THOUGH
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#2707
![Default](https://passionford.com/forum/images/icons/icon1.gif)
[/quote]
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11008.jpg)
the full kit , and any interior and engine bay fixings will be riv-nutted and a proper stainless fixing used ,
cannot stand the course threaded fixings ford used they pull and fuck the holes - eventually pulling loose
beef[/quote]
this is exactly what i have done with every fixing on my fiesta! could not deal with self fucking tappers and thousands of holes everywere anymore!!!
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11008.jpg)
the full kit , and any interior and engine bay fixings will be riv-nutted and a proper stainless fixing used ,
cannot stand the course threaded fixings ford used they pull and fuck the holes - eventually pulling loose
beef[/quote]
this is exactly what i have done with every fixing on my fiesta! could not deal with self fucking tappers and thousands of holes everywere anymore!!!
#2708
Spanner monkey
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Beef - I'll speak to my mate, he's got a brand new mk3 tailgate, and i'm sure he's got a mint spoiler.
Also, he's thinking of breaking his car soon ( series 2 with CliffS1's zetec turbo engine in it ) he's got a mint 90 spec interior half leather trimmed by rolls royce, all the metal work on the rear of the back seats and all the runners etc has been powder coated black!!
Also, he's thinking of breaking his car soon ( series 2 with CliffS1's zetec turbo engine in it ) he's got a mint 90 spec interior half leather trimmed by rolls royce, all the metal work on the rear of the back seats and all the runners etc has been powder coated black!!
#2709
10K+ Poster!!
iTrader: (9)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
looks great beefy, you and especially karl have done a fantastic job on that ![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Do you think its a good idea though for one person the paint the panels and another to paint the kit? i know the paint code and mix is the same but surely it would be better done by same person and same paint at the same time as you have that option.
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Do you think its a good idea though for one person the paint the panels and another to paint the kit? i know the paint code and mix is the same but surely it would be better done by same person and same paint at the same time as you have that option.
#2710
![Default](https://passionford.com/forum/images/icons/icon1.gif)
roosie i dunno , its like ncr or summit , ill pop over to karls tomorrow and have a looksy , do know he got it off the bay so ill c if he has the item number
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/21-1-11008.jpg)
the full kit , and any interior and engine bay fixings will be riv-nutted and a proper stainless fixing used ,
cannot stand the course threaded fixings ford used they pull and fuck the holes - eventually pulling loose
beef[/quote]
this is exactly what i have done with every fixing on my fiesta! could not deal with self fucking tappers and thousands of holes everywere anymore!!![/quote]
exactly mate , great minds think alike , always got to me why ford rivited shit on ( yeah i know it was because its cheaper in mass production )
but no good when your rebuilding it lol
![](https://passionford.com/forum/images/smilies/roi.gif)
Beef - I'll speak to my mate, he's got a brand new mk3 tailgate, and i'm sure he's got a mint spoiler.
Also, he's thinking of breaking his car soon ( series 2 with CliffS1's zetec turbo engine in it ) he's got a mint 90 spec interior half leather trimmed by rolls royce, all the metal work on the rear of the back seats and all the runners etc has been powder coated black!!
Also, he's thinking of breaking his car soon ( series 2 with CliffS1's zetec turbo engine in it ) he's got a mint 90 spec interior half leather trimmed by rolls royce, all the metal work on the rear of the back seats and all the runners etc has been powder coated black!!
![](https://passionford.com/forum/images/smilies/roi.gif)
looks great beefy, you and especially karl have done a fantastic job on that ![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Do you think its a good idea though for one person the paint the panels and another to paint the kit? i know the paint code and mix is the same but surely it would be better done by same person and same paint at the same time as you have that option.
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Do you think its a good idea though for one person the paint the panels and another to paint the kit? i know the paint code and mix is the same but surely it would be better done by same person and same paint at the same time as you have that option.
tbh marc i wouldnt see it as being an issue , karls more than compotent to paint the kit , and im supplying gary with the exact paint we used on the shell ,
but as with everything only time will tell ,
think as long as the primer colour is the same we should be fine ,
spoke to mark @ mk today , hubs are sorted
![](https://passionford.com/forum/images/smilies/roi.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
![god](https://passionford.com/forum/images/smilies/dieu.gif)
also , popping over to see rob aka robrs2 off here tonight to collect my 5 stud front hubs and 5 stud rear flanges
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
so weekend off , all systems go monday !
beef