BEEFY'S s1 cos- tues 1-5-2012 Project now for sale , breaking -
#523
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ok folks little update for today ,
finall got a bit of time on the car after helping out the other projects in the unit ,
finished off cleaning up the inner wings at the front , removeing the mk front chassis legs ect ,
obviously at this point ive left alot of metal in till i know exaclty where i want to cut ,
pics
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09001.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09001.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09002.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09002.jpg)
then cleaned bk the inner wing so its flush
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09003.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09003.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09004.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09007.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09005.jpg)
then once the trusty arbor flap disc had cleaned bk any remaining shite ,
bare metal got a light coeat of etch primer
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09004.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09008.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09008.jpg)
then done exactly the same on the drivers side ,
then after a nice cuppa ,....
i fired up the sthil saw lol
oops , im shite at magic tricks
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09012.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09012.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09015.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09015.jpg)
was really hoping to get this section of the sierra flor into the garage today to start the measureing and trimming ect , but unfortunatley was other things in the way , with a bit of luck , or better weather outdoors ( was cold and pissy wet ) ill get on with it tomorrow
so got out the trusty da sander and done a bit of shell prep whilst rocking out to the hits of AC/DC !!!!![hb.gif](https://passionford.com/forum/images/smilies/hb.gif)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09017.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09017.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09019.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09018.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09020.jpg)
also a timeout to say a big big thankyou to ANDY ESCOS as he kindly donated this box of sanding discs to the project , he gave me them at ford fair but there getting the use now lol
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09021.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09021.jpg)
also thumbs up to anth who jumped on to lend a hand once his shift at b/o had finished ,
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09025.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09025.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09027.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09027.jpg)
said the car will be pukka when its done , and i think hes kinda pissed that he sold me it lol ,
but as i told him , heel be getting the keys thrown at him once its mapped up ,![](https://passionford.com/forum/images/smilies/smile4.gif)
tomorrow should see work on the sierra floor and the tape measure out lol ,
beef
finall got a bit of time on the car after helping out the other projects in the unit ,
finished off cleaning up the inner wings at the front , removeing the mk front chassis legs ect ,
obviously at this point ive left alot of metal in till i know exaclty where i want to cut ,
pics
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09001.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09001.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09002.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09002.jpg)
then cleaned bk the inner wing so its flush
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09003.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09003.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09004.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09007.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09005.jpg)
then once the trusty arbor flap disc had cleaned bk any remaining shite ,
bare metal got a light coeat of etch primer
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09007.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09004.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09008.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09008.jpg)
then done exactly the same on the drivers side ,
then after a nice cuppa ,....
i fired up the sthil saw lol
oops , im shite at magic tricks
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09012.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09012.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09015.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09015.jpg)
was really hoping to get this section of the sierra flor into the garage today to start the measureing and trimming ect , but unfortunatley was other things in the way , with a bit of luck , or better weather outdoors ( was cold and pissy wet ) ill get on with it tomorrow
so got out the trusty da sander and done a bit of shell prep whilst rocking out to the hits of AC/DC !!!!
![hb.gif](https://passionford.com/forum/images/smilies/hb.gif)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09017.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09017.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09019.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09018.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09020.jpg)
also a timeout to say a big big thankyou to ANDY ESCOS as he kindly donated this box of sanding discs to the project , he gave me them at ford fair but there getting the use now lol
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09021.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09021.jpg)
also thumbs up to anth who jumped on to lend a hand once his shift at b/o had finished ,
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09025.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09025.jpg)
![](http://i48.photobucket.com/albums/f227/bigdogengland/carupdate4thnovember09027.jpg)
![](http://i685.photobucket.com/albums/vv218/beefcos/carupdate4thnovember09027.jpg)
said the car will be pukka when its done , and i think hes kinda pissed that he sold me it lol ,
but as i told him , heel be getting the keys thrown at him once its mapped up ,
![](https://passionford.com/forum/images/smilies/smile4.gif)
tomorrow should see work on the sierra floor and the tape measure out lol ,
beef
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
Last edited by -beefy-; 05-11-2009 at 05:46 PM.
#530
sit boo boo sit
iTrader: (4)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
nice one mucka,good to see progress
was reading FF earlier and hadnt realised how far behind its project reports end up due to printing etc,its says the s2 is about to go for media blasting.....wonder what will be in next months installment
crack on mate gonna be worth it
was reading FF earlier and hadnt realised how far behind its project reports end up due to printing etc,its says the s2 is about to go for media blasting.....wonder what will be in next months installment
crack on mate gonna be worth it
![](https://passionford.com/forum/images/smilies/roi.gif)
#531
![Default](https://passionford.com/forum/images/icons/icon1.gif)
cant wait till he tells me his daddy drives like a girl lol
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
nice one mucka,good to see progress
was reading FF earlier and hadnt realised how far behind its project reports end up due to printing etc,its says the s2 is about to go for media blasting.....wonder what will be in next months installment
crack on mate gonna be worth it![](https://passionford.com/forum/images/smilies/roi.gif)
was reading FF earlier and hadnt realised how far behind its project reports end up due to printing etc,its says the s2 is about to go for media blasting.....wonder what will be in next months installment
crack on mate gonna be worth it
![](https://passionford.com/forum/images/smilies/roi.gif)
lol this months update in ff should be a gud un !!
![](https://passionford.com/forum/images/smilies/roi.gif)
![](https://passionford.com/forum/images/smilies/roi.gif)
#538
Never gonna give you up!
Join Date: Sep 2004
Location: Location: Location: Location: Location:
Posts: 5,852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Beefy, you have to wait until next month when you get your new allocation of bandwidth. Otherwise you need to upgrade your account to a professional account.
Last edited by Rick Astley; 06-09-2010 at 02:35 AM.
#545
![Default](https://passionford.com/forum/images/icons/icon1.gif)
big thanks to petey , knocked me up a few photoshops of what it may look like
used shiftys cos s1 as a teplate ( hope you dnt mind )
obv mine wont have a cage
![](http://i430.photobucket.com/albums/qq28/Petehhh/grey-1.jpg)
with 18 inch comps ,
or ...... bbs ch rims
![](http://i430.photobucket.com/albums/qq28/Petehhh/Untitled-2-2.jpg)
or bbs lm's
![](http://i430.photobucket.com/albums/qq28/Petehhh/Untitled-5.jpg)
but the polaris is deffo the winner paint wise ,
beef
used shiftys cos s1 as a teplate ( hope you dnt mind )
obv mine wont have a cage
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://i430.photobucket.com/albums/qq28/Petehhh/grey-1.jpg)
with 18 inch comps ,
or ...... bbs ch rims
![](http://i430.photobucket.com/albums/qq28/Petehhh/Untitled-2-2.jpg)
or bbs lm's
![](http://i430.photobucket.com/albums/qq28/Petehhh/Untitled-5.jpg)
but the polaris is deffo the winner paint wise ,
beef
#547
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i dont mind comps ,but seems like every fuckers got them
even know a dodgy bloke with a set in his mk 3 mondy estate![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
i do like the bbs jobbies, arches will be trimmed bk but the with is the width .............
maybe go rl 7's as they seem to be another good choice ,
its not my fault the car suits comps lol
beef
even know a dodgy bloke with a set in his mk 3 mondy estate
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
i do like the bbs jobbies, arches will be trimmed bk but the with is the width .............
maybe go rl 7's as they seem to be another good choice ,
its not my fault the car suits comps lol
beef
#560
Resident Wrestling Legend
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
the only thing you have to remember when getting the granada hubs is that the fronts will need 4wd sierra struts (thicker) but 2wd normal sierra tca's (castleated nut fitting not pinch bolt types and make sure you use the sierra ones as the granada ones are longer so may give you funny handling issues)
or you could have just run with the funky corrado 80's wheels
or you could have just run with the funky corrado 80's wheels
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)