My '88 Sapphire RS Cosworth 2wd (update 23.04.11)
#723
Wahay!! I've lost my Virginity!!
#726
Originally Posted by crumpet
i think this is the only cossie with the speaker pods not in the doors and wind up rear windows lol!
Going back to Stian's Cossie, in my eyes it always will be the ultimate Cossie.
Last edited by mirkules; 26-04-2011 at 09:28 PM.
#727
I have the tow bar cover but haven't managed to fit it yet. Originally it was fitted with some kind of plastic rivets to the bumper but since I have a new bumper the rivets are not there.
It's an key lock for the boot. I was told that it is connected to the alarm system in the car. But i'm going to get it removed some day. Thanks!
#730
Wahay!! I've lost my Virginity!!
Join Date: Sep 2011
Location: northwales
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Just a long shot, but do you still have the old standard exhaust, or parts of it, i'm trying to put my old white saph back to original, hope yours is going well looks great in the pictures.
Nick
Nick
#733
Regular Contributor
Join Date: Mar 2011
Location: co.down N.I
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
as above started reading this last nite and then give myself a treat on a sunday morning to read the resti can only hope mine can look near as good as this fair play mate
#743
Sorry for lack of updates on the car. Been really busy the last year with family and other things so the car have only been collecting dust in the garage. I was at the Ford event at Rudskogen with the car last year. I guess some of you have read the report in PF, but unfortunately the car was not featured there
#748
#749
Hi, I know this is an old post and I hope you are still keeping the car and the setup.
I have been following your post regarding your wheels dimensions but I cannot be sure exactly which dimension and offset you had finally.
So did you have 17 x 8J on all front and rear (ET20.5 for the rear and ET35 for the front)
OR did you have 17 x 8J ET20.5 for the rear and 17 x 7.5J ET35 for the front?
Grateful if you can advise me on this
You also mentioned that the wheel was catching the caliper, did it resolve with your final front-wheel setup (17 x 7.5J ET35 OR 17 x 8J ET35) or you had to add spacers?
Is your final setup not catching the arches? I'm not sure if you had rolled them but they look to me very OE original.
Thank you very much!
I have been following your post regarding your wheels dimensions but I cannot be sure exactly which dimension and offset you had finally.
Think i would get the problem with tires catching the arches then. A bit of tire stretch looks cool too
It's 8x17" on all four, ET20,5 at the back and ET35 at the front. The front wheels has been sent away from IW today, now i'm really excited to see if they fit.
Thanks for all the warm comments guys, as always it means a lot to me!
It's 8x17" on all four, ET20,5 at the back and ET35 at the front. The front wheels has been sent away from IW today, now i'm really excited to see if they fit.
Thanks for all the warm comments guys, as always it means a lot to me!
OR did you have 17 x 8J ET20.5 for the rear and 17 x 7.5J ET35 for the front?
Grateful if you can advise me on this
But of course, another problem showed up, the wheel is catching the brake caliper even though IW is well known of that i have standard brakes on the car. It looks like they are only catching this little point. Actually i'm considering just to grind it down.
Attachment 111126
Attachment 111126
You also mentioned that the wheel was catching the caliper, did it resolve with your final front-wheel setup (17 x 7.5J ET35 OR 17 x 8J ET35) or you had to add spacers?
Thank you very much!
Thread
Thread Starter
Forum
Replies
Last Post
FlashRS
Ford RS Cosworth Parts for Sale
13
31-08-2015 06:02 PM
155lee
Ford RS Cosworth Parts for Sale
0
14-08-2015 11:21 AM