Zzz...Zzz sleeper granada
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Is it pure carbon or is a skin on the original metal one? 
20K+ Super Poster.
Joined: Jun 2003
Posts: 22,888
Likes: 0
From: Local, when i'm home...
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Here's is and old picture I found, showing the turbo's test fitted :
Last edited by Zzz...Zzz; Mar 26, 2008 at 08:12 AM.
Wahay!! I've lost my Virginity!!
Joined: Feb 2007
Posts: 51
Likes: 0
From: Greece
i believe that now with that kind of power and torque u can easily move a ....HOUSE!!!!)
EXTRAORDINAIRE!!!
ΦΟΒΕΡΟ!!=MAGNIFICANT
KEEP THE GOOD WORK....HOPE 2 SEE IT SOON RUNNING!!!
ALL THE BEST FROM GREECE
)EXTRAORDINAIRE!!!
ΦΟΒΕΡΟ!!=MAGNIFICANT
KEEP THE GOOD WORK....HOPE 2 SEE IT SOON RUNNING!!!
ALL THE BEST FROM GREECE
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,213
Likes: 0
Stunning work Joel, but then you already know that!
To think it was whacky and extreme with the YB in it before, now look at it... in fact keep your eyes peeled on PF over the coming months as you'll be able to look at it some more!
To think it was whacky and extreme with the YB in it before, now look at it... in fact keep your eyes peeled on PF over the coming months as you'll be able to look at it some more!
Virgin
Joined: Jan 2008
Posts: 7
Likes: 0
From: London
Running gear
what kind of running gear will you be using?
marco
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Hello Marco
We will use a liberty built 5 speed , and a slightly modded 2004 mustang cobra R independent rear suspension.
You can see it on page 1 i think.
For drag racing there will be a 4 linked live 9" axle as well, but not this season.
Cheers
Joel
We will use a liberty built 5 speed , and a slightly modded 2004 mustang cobra R independent rear suspension.
You can see it on page 1 i think.
For drag racing there will be a 4 linked live 9" axle as well, but not this season.
Cheers
Joel
Last edited by Zzz...Zzz; Mar 28, 2008 at 10:58 PM.
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Thanks, we try our best, but time is really a limting factor as I have to attend my very time consuming job as sales & marketing manager for sharp electronics norway everyday(!!) , meaning I am not a pro doing this car project, but what we usually refer to as an amateur =)
TOTB, YES , we really REALLY want to come there, but I will not go there unless I have got the car set up as needed for the different events.
Honestly, I don' like to loose =)
Therfore I won't attend it untill er got the car set up right and , and hence lack of spare time I doubt the car will be fully race ready for july, drivable yes, but not 100% race ready and as romours told me , the technical level at TOTB is pretty high(!!) so a well prepared package is needed to raise some eyebrows at that event?!
In addition we are a liiitle bit sceptic as how the drivetrain(altough modded with 31 spline twist axles, 4 plated carbon clutch, slip release bearing and reinforced diff housing) will handle the 1800-2000nm of torque we are going to give it, so a little testing is needed =)
Cheers
Joel
Last edited by Zzz...Zzz; Apr 1, 2008 at 12:22 PM.
Hello Mike,
Thanks, we try our best, but time is really a limting factor as I have to attend my very time consuming job as sales & marketing manager for sharp electronics norway everyday(!!) , meaning I am not a pro doing this car project, but what we usually refer to as an amateur =)
TOTB, YES , we really REALLY want to come there, but I will not go there unless I have got the car set up as needed for the different events.
Honestly, I don' like to loose =)
Therfore I won't attend it untill er got the car set up right and , and hence lack of spare time I doubt the car will be fully race ready for july, drivable yes, but not 100% race ready and as romours told me , the technical level at TOTB is pretty high(!!) so a well prepared package is needed to raise some eyebrows at that event?!
In addition we are a liiitle bit sceptic as how the drivetrain(altough modded with 31 spline twist axles, 4 plated carbon clutch, slip release bearing and reinforced diff housing) will handle the 1800-2000nm of torque we are going to give it, so a little testing is needed =)
Cheers
Joel
Thanks, we try our best, but time is really a limting factor as I have to attend my very time consuming job as sales & marketing manager for sharp electronics norway everyday(!!) , meaning I am not a pro doing this car project, but what we usually refer to as an amateur =)
TOTB, YES , we really REALLY want to come there, but I will not go there unless I have got the car set up as needed for the different events.
Honestly, I don' like to loose =)
Therfore I won't attend it untill er got the car set up right and , and hence lack of spare time I doubt the car will be fully race ready for july, drivable yes, but not 100% race ready and as romours told me , the technical level at TOTB is pretty high(!!) so a well prepared package is needed to raise some eyebrows at that event?!
In addition we are a liiitle bit sceptic as how the drivetrain(altough modded with 31 spline twist axles, 4 plated carbon clutch, slip release bearing and reinforced diff housing) will handle the 1800-2000nm of torque we are going to give it, so a little testing is needed =)
Cheers
Joel
.
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
Thread Starter
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 517
Likes: 0
From: Norway
By the way, it perhaps sounded a little "too much" me saying i don't like to loose in my prevoius post...
What i really mean is that i dont neccesearly have to win , but I want to make shure as much as possible I don't end up last - that what i mean about loosing!!
=)