S1 resto, Winter Engine Rebuild/New Wheels
#121
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Wee update, not done much this week...
tonight me an dave removed the old floorpan to fit the new one, well got it ready to fit tomorow, last time i'll see it like this as davids fitting it before I pop down to the shed tomorow![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
Chassis leg was mint!
Heres Fred...eh I mean david..
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/floorpan.jpg)
Ready to fit new one...
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/floorpan1.jpg)
Should be getting allot more done within the next couple of weeks as getting tore into it
tonight me an dave removed the old floorpan to fit the new one, well got it ready to fit tomorow, last time i'll see it like this as davids fitting it before I pop down to the shed tomorow
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
Chassis leg was mint!
Heres Fred...eh I mean david..
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/floorpan.jpg)
Ready to fit new one...
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/floorpan1.jpg)
Should be getting allot more done within the next couple of weeks as getting tore into it
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#126
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Yea man, hopefully it will drive better/rattle less than the last time you were in it
(believe it or not half the rattles dissapeared when I sorted the gearbox mounts! ![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
) ![Top](https://passionford.com/forum/images/smilies/smile011.gif)
p.s. jus aswell your no fat Euan or you might of fell through that floor
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
p.s. jus aswell your no fat Euan or you might of fell through that floor
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#127
10K+ Poster!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I did feel a wee bit shady the last time
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
bit drafty on the ankles
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#129
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Picture of tonights efforts, or lack of them
as we went for a pint, then a chinese then ended up talking to a guy about his e-type for an hour. Don't know if we even worked a full hour on the car ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Red Faced](https://passionford.com/forum/images/smilies/icon_redface.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](http://img.photobucket.com/albums/v252/rst88/IMG00025.jpg)
#131
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Davina finnishing the floorpan, its now completely in ![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/Sill2.jpg)
Drivers side sill off![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
:
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/Sill1.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/Sill.jpg)
All thats left to weld is:
Drip rail drivers side
Floor repair drivers side front and rear (small)
Drives side Sill
Drivers side rear inner wheel arch
rear inner valance both sides
couple of small patches
A pillar repairs
scuttle panel
2 front wings
Still hundreds to do...oh noo![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
got 3 weeks ish to do it all as I want it painted while im on my holidoo's so its nice and white for me coming back!
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/Sill2.jpg)
Drivers side sill off
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/Sill1.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/Sill.jpg)
All thats left to weld is:
Drip rail drivers side
Floor repair drivers side front and rear (small)
Drives side Sill
Drivers side rear inner wheel arch
rear inner valance both sides
couple of small patches
A pillar repairs
scuttle panel
2 front wings
Still hundreds to do...oh noo
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
got 3 weeks ish to do it all as I want it painted while im on my holidoo's so its nice and white for me coming back!
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#134
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
All thats left to weld is:
Drip rail drivers side
Floor repair drivers side front and rear (small)
Drives side Sill
Drivers side rear inner wheel arch
rear inner valance both sides
couple of small patches
A pillar repairs
scuttle panel
2 front wings
Still hundreds to do...oh noo
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
got 3 weeks ish to do it all as I want it painted while im on my holidoo's so its nice and white for me coming back!
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
Last edited by david; 05-06-2008 at 11:13 PM.
#137
I'm Finding My Feet Here Now
Join Date: Aug 2005
Location: derbyshire
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
brings back a lot of memories of when me and my mate restored my s1 replica. its sooo worth the hassle and bloodshed matey keep in there and you'll really enjoy the results!
mine is now minter than factory and being a xr3i - s1 replica, A hell of lot better looking than factory. mine just needs the engine to finish it as its only running xr3i cvh.
mine is now minter than factory and being a xr3i - s1 replica, A hell of lot better looking than factory. mine just needs the engine to finish it as its only running xr3i cvh.
#139
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
danxr3i, cheers mate....words of encourgement are always good at these stages !!
Yours sounds good, you got a resto thread up?
Ade, No the chassis rails are pretty mint so no need to replace, which is a bonus !
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
Ade, No the chassis rails are pretty mint so no need to replace, which is a bonus !
#140
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Got a good bit done today with new drip rail sections and work on the fusebox / inner wing area. Scuttle and a couple of small bits to do and the front end is finished ![ban-split](https://passionford.com/forum/images/smilies/ban-split.gif)
Dave has the pictures of the car but here is one of him with some improvised ear plugs![Poke](https://passionford.com/forum/images/smilies/stickpoke.gif)
![ban-split](https://passionford.com/forum/images/smilies/ban-split.gif)
Dave has the pictures of the car but here is one of him with some improvised ear plugs
![Poke](https://passionford.com/forum/images/smilies/stickpoke.gif)
![](http://img.photobucket.com/albums/v252/rst88/Image062.jpg)
#141
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Cheers for that Dave.....no a bad pic tho
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well sunday we moved the car round to start on the rear driver side inner arch and make more room to get in about the sill, this is how the car looked then:
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00444.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00445.jpg)
Today Davids been busy plating up the inner drivers side sill at the rear and making some repair plates, also welded in the battery tray and 2 front drip rail repair sections fully, just need to be ground back now!!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00457.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00459.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00460.jpg)
Rear inner arch been cut away and can see some repair sections on inner sill I think??
Nasty drum brake to be replaced with cossie setup!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00464.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00466.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00467.jpg)
Ground back bits on the rear panel and couple of small repairs need done, also found the drivers side rear valance could do with a repair section so that needs doing..if I find any more rust I swear i'll blow a fuse![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Some art David got done..
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00456.jpg)
"Beyond Hope Of Repair, FUCT"![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Sneaky pic of ZVH bottom end, some might spot the turbo was at the wrong side! will be put back to where its meant to be tho
will rebuild and fit new pistons but thats a LONG way off!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/zvh.jpg)
BIG thanks to david for all the time he's put in so far, much appreciated mate!
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well sunday we moved the car round to start on the rear driver side inner arch and make more room to get in about the sill, this is how the car looked then:
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00444.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00445.jpg)
Today Davids been busy plating up the inner drivers side sill at the rear and making some repair plates, also welded in the battery tray and 2 front drip rail repair sections fully, just need to be ground back now!!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00457.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00459.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00460.jpg)
Rear inner arch been cut away and can see some repair sections on inner sill I think??
Nasty drum brake to be replaced with cossie setup!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00464.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00466.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00467.jpg)
Ground back bits on the rear panel and couple of small repairs need done, also found the drivers side rear valance could do with a repair section so that needs doing..if I find any more rust I swear i'll blow a fuse
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Some art David got done..
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00456.jpg)
"Beyond Hope Of Repair, FUCT"
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Sneaky pic of ZVH bottom end, some might spot the turbo was at the wrong side! will be put back to where its meant to be tho
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/zvh.jpg)
BIG thanks to david for all the time he's put in so far, much appreciated mate!
Last edited by vroooom ptssssh; 28-04-2008 at 09:11 PM.
#145
PassionFord Regular
Join Date: Jun 2003
Location: West Yorkshire
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
#147
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Euan, I really hope I can have it painted for me coming back my hols in 4 weeks from now!
TurboBlower, I did mate, got 2, got them from a local bodywork supplier but they are hadrien parts and this seems to be hadriens website!
Also try beaver auto panels online, they have the same catalogue as hadrien (same panels) but list prices..their not expensive panels!
www.carpanels.co.uk
Cheers for the comments everyone, think David will be off welding for a bit after doing mine
TurboBlower, I did mate, got 2, got them from a local bodywork supplier but they are hadrien parts and this seems to be hadriens website!
Also try beaver auto panels online, they have the same catalogue as hadrien (same panels) but list prices..their not expensive panels!
www.carpanels.co.uk
Cheers for the comments everyone, think David will be off welding for a bit after doing mine
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#149
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looooong way to go still yet mate ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Ah well cant rush these things I suppose....only got time to work on it some nights a week for a few hours so it's taking a bit longer!
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Ah well cant rush these things I suppose....only got time to work on it some nights a week for a few hours so it's taking a bit longer!
#151
PassionFord Regular
Join Date: Jun 2003
Location: West Yorkshire
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Dont suppose you know a part no. do you mate for them a pillar repair panels, ive searched high & low and cant source anything, I live close to Beavers and get all my other panels from them but they tell me Hadrian dont list anything for a' panel and i cant see owt on the Hadrian website.
Any help appreciated,
Regards,
Adi
Any help appreciated,
Regards,
Adi
#152
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Ah shit sorry I forgot they were listed as 'door jamb/B post'
30-27-272
DOOR JAMB (B POST) RHŁ16.60Ł15.60
30-27-273
DOOR JAMB (B POST) LHŁ16.60Ł15.60
http://bap.dominohosting.biz/bap/bap...cument&Ret=ALL
http://bap.dominohosting.biz/bap/bap...cument&Ret=ALL
The pic isnt a 100% match of how the panel looks but thats the ones, front door bolts onto that part, wing goes over it...
30-27-272
![](http://bap.dominohosting.biz/icons/vwicn058.gif)
![](http://bap.dominohosting.biz/icons/ecblank.gif)
![](http://bap.dominohosting.biz/icons/vwicn058.gif)
http://bap.dominohosting.biz/bap/bap...cument&Ret=ALL
http://bap.dominohosting.biz/bap/bap...cument&Ret=ALL
The pic isnt a 100% match of how the panel looks but thats the ones, front door bolts onto that part, wing goes over it...
#153
PassionFord Regular
Join Date: Jun 2003
Location: West Yorkshire
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Cheers for that mate, can hopefully get to the same stage your at now with the welding...
Mines only been off the road for near on 3 years o'well one day i'll get there lol
Thanks Again - Adi
Mines only been off the road for near on 3 years o'well one day i'll get there lol
Thanks Again - Adi
#154
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well not much to report as i've been on holiday for near 3 weeks and David wasnt able to do work while I was away so its more or less how it looks in the last pic.
Went up tonight with David and he finnished welding the sill on
I started to seam sealer the front inner wings where they been welded and just as a wee experiment to see how it would turn out I painted half the driver side inner wing with stone chip! doing it with a brush so it'll need a few coats to build it up but its starting to look a bit better up front! never got any pics so will get some tomorow night once i've done a bit more
Went up tonight with David and he finnished welding the sill on
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#155
It Wasnt Me!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well heres a pic or 2, applied some colour at last (in the form of stone chip, 2 coats so far) will prob need about 4 or 5 coats, then will spray it with white paint!
David done a plate inside the car under where the rear bench would be, it's getting their...now that side has stone chip on it feels like its getting somewhere anyway altho looks otherwise!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/seamsealer2.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/seamsealer1.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/seamsealer.jpg)
And a pic I quite like of how it used to look...![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
David done a plate inside the car under where the rear bench would be, it's getting their...now that side has stone chip on it feels like its getting somewhere anyway altho looks otherwise!
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/seamsealer2.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/seamsealer1.jpg)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/seamsealer.jpg)
And a pic I quite like of how it used to look...
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](http://img.photobucket.com/albums/0803/vroooom_ptssssh/My%20Car/S1%20Resto/DSC00122.jpg)
Last edited by vroooom ptssssh; 29-05-2008 at 09:08 PM.
#156
Fucking superstar........
Join Date: May 2004
Location: Argyll.... It's lonely...
Posts: 13,240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looking good mate. Gimme a bell when you're next there, I've lost your number due to a phone failure... So can't call you. But on leave now until late August/early September so will pop down in my sensible family saloon.
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#160
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Pics up Biatch ![Poke](https://passionford.com/forum/images/smilies/stickpoke.gif)
My back is agony btw, driving home was a nightmare with the seats in that thing being leather
![Poke](https://passionford.com/forum/images/smilies/stickpoke.gif)
My back is agony btw, driving home was a nightmare with the seats in that thing being leather
![](https://passionford.com/forum/images/smilies/angry.gif)
Last edited by david; 30-05-2008 at 09:24 PM.