F2 Maxi Build Lucifer II - RL7's and a BIG Turbo!
#401
Lucifer II - 666
Thread Starter
#402
Lucifer II - 666
Thread Starter
got my rear Tarman spec Billies back today, full magnesium coil over set up to match fronts set up
Had the barings replaced as they had seen better days
Will be ordering springs this week for them also need to get some new platforms for the fronts
been having a chat with me mate Marco who recomended a few apring ratings for my set up, cheers mate
Had the barings replaced as they had seen better days
Will be ordering springs this week for them also need to get some new platforms for the fronts
been having a chat with me mate Marco who recomended a few apring ratings for my set up, cheers mate
#403
Lucifer II - 666
Thread Starter
Discussing plans today for paint - hopefully get welding work on cage and turrets finished first to weeks of August then just to buy the paint needed
Loads of room in the lack up now also as sadly my freind has had to pull out
Having some one paint my green RS black here and if works out wel the F2 will be painted here also
met RWD Will today aswell, propppa nice bloke - good to meet ya mate
Loads of room in the lack up now also as sadly my freind has had to pull out
Having some one paint my green RS black here and if works out wel the F2 will be painted here also
met RWD Will today aswell, propppa nice bloke - good to meet ya mate
#404
Lucifer II - 666
Thread Starter
Cheers Ste
Been working again today with Sam, Cage will be finished tomorrow
also one for Phil Botley - check out my rear bumper mod :biggrin:
hard to see on a pic but ive removed the rear defuser from it - will show off my rera been lol
more updates tomorrow
Been working again today with Sam, Cage will be finished tomorrow
also one for Phil Botley - check out my rear bumper mod :biggrin:
hard to see on a pic but ive removed the rear defuser from it - will show off my rera been lol
more updates tomorrow
#408
Lucifer II - 666
Thread Starter
Thanks for the replies lads
Loads of pics as we had a long day at the lock up - summer day and baby sitter lol
Can you beleive the cage is actualy finished apart from adding odd few bits here and there
also got the car up on all four axle stands now and all running gear removed ready for treating the floor
few randopm pics from the day lol as we tidied up lol
our new sand blaster set up
I dont ring cars honest pmls
sign post lol
massive thanks to Sam for spending day up at lock up again as we're back there tomorrow working on his shell now lol
for got to add - heres our kitchen !!!!
Loads of pics as we had a long day at the lock up - summer day and baby sitter lol
Can you beleive the cage is actualy finished apart from adding odd few bits here and there
also got the car up on all four axle stands now and all running gear removed ready for treating the floor
few randopm pics from the day lol as we tidied up lol
our new sand blaster set up
I dont ring cars honest pmls
sign post lol
massive thanks to Sam for spending day up at lock up again as we're back there tomorrow working on his shell now lol
for got to add - heres our kitchen !!!!
Last edited by Minirotty; 06-08-2009 at 09:15 PM.
#409
Lucifer II - 666
Thread Starter
done some messin about today with dash boards as Ive got a few to chop up befor I chop the flocked one up lol
random pics taken by a voodoo
Turrets under the bonnet are going to be looked at Sunday so should be done soon
random pics taken by a voodoo
Turrets under the bonnet are going to be looked at Sunday so should be done soon
#410
Lucifer II - 666
Thread Starter
work on the front turrits has started
Tim came along with the plasma cutter this afternoon and started on the cossie turrits and also messured and markd up the escort ones ready for cutting
Tim cleaning off turrits
cutting away inner wings
some more chopping in the bay
chooped
only placed on for measuring purposes, will look nothing like this when done lol
more updates soon as the plasma shit it self and needs new tip
Tim came along with the plasma cutter this afternoon and started on the cossie turrits and also messured and markd up the escort ones ready for cutting
Tim cleaning off turrits
cutting away inner wings
some more chopping in the bay
chooped
only placed on for measuring purposes, will look nothing like this when done lol
more updates soon as the plasma shit it self and needs new tip
#411
Lucifer II - 666
Thread Starter
Give people an idea of what theyll look like
Stoo's cossie orion -
Stoo's cossie orion -
#412
I'm Finding My Feet Here Now
Join Date: Dec 2005
Location: Chester, UK
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
It's looking great, you should have it done soon .
One pointer from the above photo though, they are not quite cosworth turrets. very similar if you are trimming the center piece off yours though.
One pointer from the above photo though, they are not quite cosworth turrets. very similar if you are trimming the center piece off yours though.
#414
Lucifer II - 666
Thread Starter
Cheers Stoo, yeah can see yoursarent the cossie ones but as close I could get as to explain to people what I am going for
this is what mine shall look like when done
Thanks Ginge, apreciate the reply
#415
Lucifer II - 666
Thread Starter
went to me mate Tims today with Sam and he's made up the top plates for my mounts ready to go into my new turrits
look sexy dont they
look sexy dont they
#418
Lucifer II - 666
Thread Starter
Thanks for the comments lad's, will hopefully update again this weekend
#420
Lucifer II - 666
Thread Starter
Cheers bud
not got any more done tbh as I was removing original turret tops and got metal in my eye lol two trips to hospital later its out but pissed me off lol
new ones ready go on
not got any more done tbh as I was removing original turret tops and got metal in my eye lol two trips to hospital later its out but pissed me off lol
new ones ready go on
#422
Lucifer II - 666
Thread Starter
yeah was a bastard man, never done owte like that befor you usualy just walk it off type shit lol this wasnt shifting
#423
#424
Lucifer II - 666
Thread Starter
would love to see pic's mate, don't get to chat to others with F2's as most are other side of the world.
#425
where did u get ur rear spoilerand bonnet vent?? love it:to p:
have shell painted and more or less all sorted for the build but waiting on mcgeehan motorsport to start the car the 3rd week in october. they run eugene donnelly in the skoda fabia wrc in the irish tarmac championship and are flat out with him at the min hows ur car at the minute????
#430
Lucifer II - 666
Thread Starter
Thanks Glenny Boy
Great pic's f2 maxi
Great pic's f2 maxi
#432
Lucifer II - 666
Thread Starter
theres 4 or 5 over here still being rallied. mine was a forest car built by gordon spooner. has 6speed xtrac seq gear box,3way proflex and wrc escort breaks n 260 bhp
where did u get ur rear spoilerand bonnet vent?? love it:to p:
have shell painted and more or less all sorted for the build but waiting on mcgeehan motorsport to start the car the 3rd week in october. they run eugene donnelly in the skoda fabia wrc in the irish tarmac championship and are flat out with him at the min hows ur car at the minute????
where did u get ur rear spoilerand bonnet vent?? love it:to p:
have shell painted and more or less all sorted for the build but waiting on mcgeehan motorsport to start the car the 3rd week in october. they run eugene donnelly in the skoda fabia wrc in the irish tarmac championship and are flat out with him at the min hows ur car at the minute????
spec of yours sounds fantastic mate, I'll PM you details of parts your interested in bud.
cars not changed much since last pics lol hope to get cracking on with it again in a couple of weeks though want it painted asap really so I can start bolting it all back together
Cheers mate, hows your project coming on?
#433
Too many posts.. I need a life!!
A bit of a hold on mine as i've been moving into my house and then got my old rs back but im spraying that at the min so hope to get back to the 4x4 by next month.but good to see you moving along nicely
#434
sorry mate didnt see this reply from you earlier
spec of yours sounds fantastic mate, I'll PM you details of parts your interested in bud.
cars not changed much since last pics lol hope to get cracking on with it again in a couple of weeks though want it painted asap really so I can start bolting it all back together
spec of yours sounds fantastic mate, I'll PM you details of parts your interested in bud.
cars not changed much since last pics lol hope to get cracking on with it again in a couple of weeks though want it painted asap really so I can start bolting it all back together
its hard to get at the build sometimes u fair know ur way round a car by the looks of it. the wee car is looking mint. what colour r u going for?????? i went gloss black outside and semi matt inside. if u could pm me the details id be over the moon as thats the last 2 things ive to get for the car (that i know off)lol.
#435
aye john is really good at the photos
hes a web site
http://www.rallyphotographer.com
take a look of some of the mk2 escorts that den motorsport has built and johns own cars
some really nice cars on it
hes a web site
http://www.rallyphotographer.com
take a look of some of the mk2 escorts that den motorsport has built and johns own cars
some really nice cars on it
#436
Lucifer II - 666
Thread Starter
aye its a good car just needed freshen up cant wait to get it out again had some good results and FUN in her.
its hard to get at the build sometimes u fair know ur way round a car by the looks of it. the wee car is looking mint. what colour r u going for?????? i went gloss black outside and semi matt inside. if u could pm me the details id be over the moon as thats the last 2 things ive to get for the car (that i know off)lol.
its hard to get at the build sometimes u fair know ur way round a car by the looks of it. the wee car is looking mint. what colour r u going for?????? i went gloss black outside and semi matt inside. if u could pm me the details id be over the moon as thats the last 2 things ive to get for the car (that i know off)lol.
PM'd you the info you need mate
I'm going gloss black aswell be wicked to see yours when done bud
#437
Lucifer II - 666
Thread Starter
#440
Lucifer II - 666
Thread Starter
Has enit
no pics atm but had my new fabricated GrpA Mounts turn up this morning
was planing on progress this weekend but lads who were gona help out ones got shit come up and others hurt his back so I decided to help a mate out with his new RS so next weekend I hope now bud
Cheers bud
no pics atm but had my new fabricated GrpA Mounts turn up this morning
was planing on progress this weekend but lads who were gona help out ones got shit come up and others hurt his back so I decided to help a mate out with his new RS so next weekend I hope now bud
Cheers bud