F2 Maxi Build Lucifer II - RL7's and a BIG Turbo!
#481
Lucifer II - 666
Thread Starter
another pic just wanted to add in thread, finished building up coil overs today and was well chuffed with end result
thanks to Tim for helping out with it also
thanks to Tim for helping out with it also
#485
Lucifer II - 666
Thread Starter
Collected the paint from Smethwick Coley mate only a little run across town from me
Thanks fella, you too
Cheers mate, have to catch up after Christmas mate, may pop over when passing for a cuppa tea n biscuits
Cheers mate, have to catch up after Christmas mate, may pop over when passing for a cuppa tea n biscuits
#486
Lucifer II - 666
Thread Starter
Been back at lock up today with Sam armed with a welder, plan was to fit seat bars and finish welding turrets in.
But realised some more had to be removed from floor pan, the original seat mounts etc were in the way as Sam said they would be lol
tucjk ages, when finshed gettin um out started to do turret and electric went up the lock up and by time got it fixed was knackered and went home lol
some pics -
Trial fitted seat before mounting bars welded in
more soon.
But realised some more had to be removed from floor pan, the original seat mounts etc were in the way as Sam said they would be lol
tucjk ages, when finshed gettin um out started to do turret and electric went up the lock up and by time got it fixed was knackered and went home lol
some pics -
Trial fitted seat before mounting bars welded in
more soon.
#488
Lucifer II - 666
Thread Starter
Cheers bud
#489
Lucifer II - 666
Thread Starter
update - 99% finished ready for paint now, all internal floor work done today and also finished one of the turrets welding.
was quite hard to take pics of the seat bars as we had primerd and thiinly stone chipped the floor but heres a few of the floor -
then the what I though looked very sexy bit, seats in and mocked up with harnesses to check all positioning was corretc - looks ace!!!
harness bars are perfect -
then the very cool bit, seats.........
Seat positions taken from measuring sams rally shell, spot on I think.
getting there, more soon.
was quite hard to take pics of the seat bars as we had primerd and thiinly stone chipped the floor but heres a few of the floor -
then the what I though looked very sexy bit, seats in and mocked up with harnesses to check all positioning was corretc - looks ace!!!
harness bars are perfect -
then the very cool bit, seats.........
Seat positions taken from measuring sams rally shell, spot on I think.
getting there, more soon.
#491
Lucifer II - 666
Thread Starter
Cheers bud
#492
Lucifer II - 666
Thread Starter
Look what I got through in the post today!
45mm Jenveys thanks to Gary for selling them
45mm Jenveys thanks to Gary for selling them
#493
Lucifer II - 666
Thread Starter
anyone know what BHP are cossy greys god for?
#496
Lucifer II - 666
Thread Starter
Nice one, they'll be staying then
#498
Lucifer II - 666
Thread Starter
na mate theyre fine, removed um from a maxi spec engine running 240 on pectal
I'll be runnign Omex and 300+ bud.
I'll be runnign Omex and 300+ bud.
#500
Lucifer II - 666
Thread Starter
read the thread ya lazy cunt
#502
Lucifer II - 666
Thread Starter
it's an I4 bud
brief spec
2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc
2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.
brief spec
2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc
2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.
Last edited by Minirotty; 25-02-2010 at 09:27 PM.
#503
Advanced PassionFord User
Join Date: Oct 2003
Location: essex
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
it's an I4 bud
brief spec
2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc
2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.
brief spec
2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc
2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.
#504
B1mbo
iTrader: (1)
there is lots of dyno sheets at work ill have to have a look through
think they changed the inlets from barrels to slides or vice versa dependant on the surface of the rally, gravel, tarmac
#505
B1mbo
iTrader: (1)
it's an I4 bud
brief spec
2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc
2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.
brief spec
2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc
2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.
#506
Lucifer II - 666
Thread Starter
they ran slides on the late ones, I doubt this'll make the power I want on it's first run out the box but it wont be shy either.
ill get the fucker to 300+ as ill develop it there as I know its achievable, if it wasnt i wouldn't be trying.
would have chosen slide for this but couldnt find any available but when a set comes up ill get um if possible at the time.
ill get the fucker to 300+ as ill develop it there as I know its achievable, if it wasnt i wouldn't be trying.
would have chosen slide for this but couldnt find any available but when a set comes up ill get um if possible at the time.
#507
Lucifer II - 666
Thread Starter
Update on parts not shell lol
Collected 9 x alloy wheels today for mine and Sams car - OZ Ford MotorSport Magnesium 18x8's
removed from Colin MrCaes works focus's.
Most have hair line cracks to rims so in need of repair but for what they cost theyre defo worth it.
also picked this up -
Spot whats missing from this rocker cover?
Oil filler cap - hasn't got one, was removed from this black cabby - I dont need oil filler as im runing dry sump!
running 2.3 scorpion engine on auto box factory fitted, another one off lol
Thanks to Paul for parts and going scrappy for me, cheers bud.
Collected 9 x alloy wheels today for mine and Sams car - OZ Ford MotorSport Magnesium 18x8's
removed from Colin MrCaes works focus's.
Most have hair line cracks to rims so in need of repair but for what they cost theyre defo worth it.
also picked this up -
Spot whats missing from this rocker cover?
Oil filler cap - hasn't got one, was removed from this black cabby - I dont need oil filler as im runing dry sump!
running 2.3 scorpion engine on auto box factory fitted, another one off lol
Thanks to Paul for parts and going scrappy for me, cheers bud.
Last edited by Minirotty; 15-03-2010 at 09:11 PM.
#509
Lucifer II - 666
Thread Starter
I'll tell them it's a development engine that needs no oil
#510
Lucifer II - 666
Thread Starter
Better pics of the alloys, tuck um all up the unit.
Couple of lads found out I had them and asked for one for memorabelia (sp)purpuses lol I said piss off obviusly lol
also sorted out having them all repaired already but id like to have all stickers made up again as want them to look original.
Couple of lads found out I had them and asked for one for memorabelia (sp)purpuses lol I said piss off obviusly lol
also sorted out having them all repaired already but id like to have all stickers made up again as want them to look original.
#511
Lucifer II - 666
Thread Starter
A few pics of the focus in tarmac spec with wheels
#513
PassionFord Regular
Join Date: May 2004
Location: Preston, Lancs
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Were the wheels listed on ebay till recently?
Was gutted when the auction got pulled, was hoping for a last minute cheap ebay snipe lol
Cool project btw
Spud
Was gutted when the auction got pulled, was hoping for a last minute cheap ebay snipe lol
Cool project btw
Spud
#515
Lucifer II - 666
Thread Starter
they were, i went to collect another part off of the seller and saw these in his garden so had um
not sure if I can get um to fit onto this car as yet but if it proves to much work ill fit them to my other RS
#517
Lucifer II - 666
Thread Starter
lol cheers bud but I'm sure once your new garage is built you'll crack on and get loads more than me done
#520
Lucifer II - 666
Thread Starter