EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
02-01-2006, 08:09 AM
#1564
Originally Posted by whitecossie
thats the dogs mate i fancy a set of the bonnet pins for me car where did u get them from if ya dont mind me asking ?
www.djm-motorsport.co.uk
02-01-2006, 07:07 PM
#1566
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
That looks even better now mate, agree, carbon should be un-painted, looks lovely!
Plus shows it off to everyone that you have proper carbon fibre on the car!
Happy New Year mate!
Plus shows it off to everyone that you have proper carbon fibre on the car!
Happy New Year mate!
04-01-2006, 05:11 PM
#1569
I thought i would wait for the under bonnet heat sheild to arrive before putting on the bonnet as it would be easier to fit ,this morning a parcel arrived at my door
Not cheap but well worth it.
Using the templates i made last week i cut the sheild to the correct size.
Using a hot air gun we warmed the bonnet up and the sheild so it would stick better.
Took the bonnet home to be fitted .
Got it all lined up but got a bit too dark ,placed the vents in ,still to order new screws for these and still to bond in the carbon ,managed to get a few shots ,will get more up tomorrow
REALLY pleased with the look of the bonnet
Not cheap but well worth it.
Using the templates i made last week i cut the sheild to the correct size.
Using a hot air gun we warmed the bonnet up and the sheild so it would stick better.
Took the bonnet home to be fitted .
Got it all lined up but got a bit too dark ,placed the vents in ,still to order new screws for these and still to bond in the carbon ,managed to get a few shots ,will get more up tomorrow
REALLY pleased with the look of the bonnet
04-01-2006, 06:14 PM
#1577
Redumbdancy
Awesome 
Here's me thinking you had the bonnet finished then you go and add yet another mod to it - the well expensive heat sheilding
What are your next plans? Im dying to know?!
Here's me thinking you had the bonnet finished then you go and add yet another mod to it - the well expensive heat sheilding
What are your next plans? Im dying to know?!
04-01-2006, 07:28 PM
#1582
15K+ Super Poster!!
Join Date: May 2003
Location: Bucks
Posts: 17,976
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mercury grey minter
Dont't scratch that roof...
I was thinking the very same until I saw the cardboard in the later pics OMFG that does look soooooo fookin hard!
I knew it was going to look good but seeing the bonnet on the car really finishes it off....that is fookin smart lads....the hard work paid off that's for sure! 
More pics please
04-01-2006, 11:20 PM
#1589
PassionFord Post Whore!!
iTrader: (4)
Amazing mate! Read the whole thread and have to say the work done to this is outstanding!!!!
Think i'll kindnap you, bring you over here and force you to do my car!
Think i'll kindnap you, bring you over here and force you to do my car!
Oh yes i do!!! 
05-01-2006, 03:32 PM
#1592
As promised i have taken some photos in the daylight,also had to mod the pins to suit the new lower catches.
Pin shortened and top locating nut sawn in half ,to bring height down even more.
Before it was all bonded in place i took some photos.
Carbon all bonded in ,will let this go off then open bonnet and bond in from underneath aswell.
Pin shortened and top locating nut sawn in half ,to bring height down even more.
Before it was all bonded in place i took some photos.
Carbon all bonded in ,will let this go off then open bonnet and bond in from underneath aswell.
