EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
27-12-2005, 11:44 AM
#1531
Right some of you may think i am mad ,but i have just got in from repainting the bonnet 
couple of bits on it i was not 100% happy with so gave it a block down with 1000 grit wet and dry and gave it 3 more coats soooooooooo much happier with it now ,forgot to take the camera round there though 
so will take it along when i colour sand it on thurs 
couple of bits on it i was not 100% happy with so gave it a block down with 1000 grit wet and dry and gave it 3 more coats soooooooooo much happier with it now ,forgot to take the camera round there though so will take it along when i colour sand it on thurs
27-12-2005, 12:05 PM
#1532
Regular Contributor
Join Date: Aug 2003
Location: ESSEX
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Twins
Originally Posted by Michelle
Looks lovely dave done a top job there, lovely outfits you have mate
see ya soon
see ya soon
Hi Dave yeah ive been great thanks
havent seen you for a little while hope u and Stu are both well christmas was good thanks, happy new year if i dont see ya 
28-12-2005, 07:55 AM
#1535
Originally Posted by Michelle
Originally Posted by Twins
Originally Posted by Michelle
Looks lovely dave done a top job there, lovely outfits you have mate
see ya soon
see ya soon
Hi Dave yeah ive been great thanks
havent seen you for a little while hope u and Stu are both well christmas was good thanks, happy new year if i dont see ya
28-12-2005, 07:56 AM
#1536
Originally Posted by Dan
Looks great mate, doesn't the black or should I say carbon look the nuts against gleaming red paintwork! 
Lovely work mate!
Lovely work mate!
29-12-2005, 04:49 PM
#1542
Ok time for an update ,rubbed down the bonnet and repainted it the other day ,as there was a few bits on it i was not happy with,went over there today to colour sand and mop the bonnet ,here are some pics.
Rubbing down with 2000 grit
Ready for mopping.
Nearly mopped.
Finnesse it going on.
Flipped the bonnet over at this stage to make up some templates for the bonnet heat insulation,going to use the silver self adehsive stuff(anyone got any good places to pick this stuff up).
Taped down so vent hole can be drawn around from top.
Flipped over and checked on other side.
Middle template complete.
Bonnet turned back over and hand polished to finish.
Random piccys of the bonnet ,very pleased how it turned out this time ,glad we rubbed it down and re-did it
Rubbing down with 2000 grit
Ready for mopping.
Nearly mopped.
Finnesse it going on.
Flipped the bonnet over at this stage to make up some templates for the bonnet heat insulation,going to use the silver self adehsive stuff(anyone got any good places to pick this stuff up).
Taped down so vent hole can be drawn around from top.
Flipped over and checked on other side.
Middle template complete.
Bonnet turned back over and hand polished to finish.
Random piccys of the bonnet ,very pleased how it turned out this time ,glad we rubbed it down and re-did it
29-12-2005, 09:03 PM
#1548
15K+ Super Poster!!
Join Date: May 2003
Location: Bucks
Posts: 17,976
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 12jedi12
where have u had all the paint work done? i am asking this because i am looking for a good paint shop in essex thanks
Superb work Dave, that bonnet looks factory with the 4by4 vents.....looks excellent from the pics
31-12-2005, 05:04 PM
#1552
Thought i would fix the bonnet pins into the holders today ,some pictures of the work.
Masking tape applied to mark out the holes.
Holes marked out.
Drilled.
Pin riveted into place.
Did this one from below as the gap was too small to get the gun into from above.
Also used washers to stop the rivets pulling through.
All ready for bonding to the bonnet when its lined up on the car.
Thats its for now untill i get the bonnet on ,Happy new year
Masking tape applied to mark out the holes.
Holes marked out.
Drilled.
Pin riveted into place.
Did this one from below as the gap was too small to get the gun into from above.
Also used washers to stop the rivets pulling through.
All ready for bonding to the bonnet when its lined up on the car.
Thats its for now untill i get the bonnet on ,Happy new year
31-12-2005, 06:09 PM
#1557
I'm Finding My Feet Here Now
Join Date: Dec 2005
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts