EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
#83
Spanner monkey
Originally Posted by Twins
Originally Posted by cliff6732000
Was serious when I said do you fancy doing mine next year
Am quite sure it would be worth more than a Maccy D's
Am quite sure it would be worth more than a Maccy D's
Oh, and Dave ( Keech ) they DO eat alot, my cupboards were emptied when they helped fit my kitchen!!
#88
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Been looking at the pics again and bonnet does really suit the car I think! lol
Can't beleive what a complete car this is, don't go and sell it once its all done like everybody else tho, enjoy it and make it even faster & better!
Can't beleive what a complete car this is, don't go and sell it once its all done like everybody else tho, enjoy it and make it even faster & better!
#92
Originally Posted by Dan
Been looking at the pics again and bonnet does really suit the car I think! lol
Can't beleive what a complete car this is, don't go and sell it once its all done like everybody else tho, enjoy it and make it even faster & better!
Can't beleive what a complete car this is, don't go and sell it once its all done like everybody else tho, enjoy it and make it even faster & better!
#93
Originally Posted by M.A.D.RST
This car is lush, and some much work has gone into it. Well done.
Do you use it as an everyday car?
Do you use it as an everyday car?
No mate when i bought it ,it was as a hobby/project ,i dont leave it anywhere just for shows and weekend use,thats why i still get a buzz when i turn the key
#98
Just been into the garage to take a few more piccys of the car .This is my headlight air vent that i made about a year ago.painted with a Halford spray can!!!.I also have made a few for my mates cars,James Bentley aka
Soy,Tom Scarletts s1 with anti lag in pf mag,and dan E RAT white s2 also in pf mag recently.
Soy,Tom Scarletts s1 with anti lag in pf mag,and dan E RAT white s2 also in pf mag recently.
#99
My gauge pods that i made about two years ago ,sitting in the seat properly you can see all the gauges and clocks ok.(hmm where have i seen pods like this recently).
N/s mirror blank i made a while ago.
My carpeted door pockets,these came from an orion ghia.
A few of the bonnet the graphics are based on the Nismo Skyline race car
The mirrors have been cut down by about one and a half inches and are still electric the glass has been replaced with mirrored perspex.
For the interor mirror i have used a Granada Scorpio electrically dimming one.
The cossie ecu now lives in the glovebox on a slide mount.
I have also retrimmed the boot area.
A few of the engine bay,i have re routed the loom into the inner wings for a cleaner look and also moved the coil and other bits to the bulkhead,out of the way.
Note the loom from the fuse box going into the inner wing also horns etc have been moved.
I managed to get hold of a carbon fibre cambelt cover aswell.
The turbo has been wrapped in heat wrap.
The intercooler and fans.
A close up of the injectors also showing my Ahmed mfi to efi adaptor plate.
My Pipercross cone filter.
N/s mirror blank i made a while ago.
My carpeted door pockets,these came from an orion ghia.
A few of the bonnet the graphics are based on the Nismo Skyline race car
The mirrors have been cut down by about one and a half inches and are still electric the glass has been replaced with mirrored perspex.
For the interor mirror i have used a Granada Scorpio electrically dimming one.
The cossie ecu now lives in the glovebox on a slide mount.
I have also retrimmed the boot area.
A few of the engine bay,i have re routed the loom into the inner wings for a cleaner look and also moved the coil and other bits to the bulkhead,out of the way.
Note the loom from the fuse box going into the inner wing also horns etc have been moved.
I managed to get hold of a carbon fibre cambelt cover aswell.
The turbo has been wrapped in heat wrap.
The intercooler and fans.
A close up of the injectors also showing my Ahmed mfi to efi adaptor plate.
My Pipercross cone filter.
#102
PassionFord Post Troll
Join Date: May 2004
Location: Robin Hood Country!!
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
Everytime you put pics on, i get excited LOL, l love it!! Exactly how id mod an RST if i had a red one!!
Love the PF front cover too, where dya get that done mate??
Love the PF front cover too, where dya get that done mate??
#104
Originally Posted by K3V HA
Everytime you put pics on, i get excited LOL, l love it!! Exactly how id mod an RST if i had a red one!!
Love the PF front cover too, where dya get that done mate??
Love the PF front cover too, where dya get that done mate??
#106
I've found that life I needed.. It's HERE!!
Join Date: May 2004
Location: Viva Bas Vegas
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
Dave
Big respect goes out to you for everything that you've done to that car. I didn't realise how far you actually went with spraying the underneath. It looks absolutely immaculate
I must say that it is by far the best looking S2 i've ever seen.
Big respect goes out to you for everything that you've done to that car. I didn't realise how far you actually went with spraying the underneath. It looks absolutely immaculate
I must say that it is by far the best looking S2 i've ever seen.
#108
Advanced PassionFord User
Join Date: Aug 2003
Location: Orange County, California
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Some of the mods you've done are so cool, very original. Personally I dont like the black wheels and the gauges by the steering wheel are a bit halfords but overall its excllent. love the pics.
#110
Originally Posted by Methados
What exhaust system you have?
Car looks fine
Car looks fine
#111
Originally Posted by LemonsS2
Dave
Big respect goes out to you for everything that you've done to that car. I didn't realise how far you actually went with spraying the underneath. It looks absolutely immaculate
I must say that it is by far the best looking S2 i've ever seen.
Big respect goes out to you for everything that you've done to that car. I didn't realise how far you actually went with spraying the underneath. It looks absolutely immaculate
I must say that it is by far the best looking S2 i've ever seen.
#112
I've found that life I needed.. It's HERE!!
Join Date: May 2003
Location: south wales
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
looks fooking awesome mate !!!!!!!!!!!!!!!!
well done its a credit to u !!!!!!!!!!
do u sell the headlight scoops for a S1
or/and the top coloum covers for a s1 to hold gauges etc etc
thanks
matt
well done its a credit to u !!!!!!!!!!
do u sell the headlight scoops for a S1
or/and the top coloum covers for a s1 to hold gauges etc etc
thanks
matt
#113
Originally Posted by MAD matt-sab
looks fooking awesome mate !!!!!!!!!!!!!!!!
well done its a credit to u !!!!!!!!!!
do u sell the headlight scoops for a S1
or/and the top coloum covers for a s1 to hold gauges etc etc
thanks
matt
well done its a credit to u !!!!!!!!!!
do u sell the headlight scoops for a S1
or/and the top coloum covers for a s1 to hold gauges etc etc
thanks
matt
#116
Just been out side again to take some more pictures this time on the underside ,hope you like them.
A close up of the new fuel pump bracket.
[
One of the tank.
Fuel and brake lines etc etc.
boot floor.
O/s rear
Spring is like that as i jacked up on rear arm.
The"mo"
The o/s arch showing the modified bodykit.Also the rear calipers are now black to match the fronts.
The part under the bumper is still to be done
This is where the new brake valves where mounted.
Arch bonded on.
A close up of my tow hook cover.
rear end has not been cleaned since i done it back in July, will have to get under with me soapy water,front end to be done soon.Hope you like them.
A close up of the new fuel pump bracket.
[
One of the tank.
Fuel and brake lines etc etc.
boot floor.
O/s rear
Spring is like that as i jacked up on rear arm.
The"mo"
The o/s arch showing the modified bodykit.Also the rear calipers are now black to match the fronts.
The part under the bumper is still to be done
This is where the new brake valves where mounted.
Arch bonded on.
A close up of my tow hook cover.
rear end has not been cleaned since i done it back in July, will have to get under with me soapy water,front end to be done soon.Hope you like them.
#118
15K+ Super Poster!!
Join Date: May 2003
Location: Bucks
Posts: 17,976
Likes: 0
Received 0 Likes
on
0 Posts
Lookin good mate, like the idea on the towing eye cover, explain more on how that was done then, I guess it is something u had made or made urself?
Also, for your fuel pump, I am doing my underside now also and my pump cradle is pretty shot, did u buy a bnew unit from Ford? I was lookin at the AS stainless jobbie they sell and may well go along with that, but I have to use my existing rubber flexi mounts, so not too sure yet.
What rear brake setup do you have?
Also, for your fuel pump, I am doing my underside now also and my pump cradle is pretty shot, did u buy a bnew unit from Ford? I was lookin at the AS stainless jobbie they sell and may well go along with that, but I have to use my existing rubber flexi mounts, so not too sure yet.
What rear brake setup do you have?
#119
Originally Posted by rich_frst
Shit hot mate!! your car is the balls....
what did you use to bond the arches to the inside of the wing?? looks good
#120
Originally Posted by adamS2RST
Lookin good mate, like the idea on the towing eye cover, explain more on how that was done then, I guess it is something u had made or made urself?
Also, for your fuel pump, I am doing my underside now also and my pump cradle is pretty shot, did u buy a bnew unit from Ford? I was lookin at the AS stainless jobbie they sell and may well go along with that, but I have to use my existing rubber flexi mounts, so not too sure yet.
What rear brake setup do you have?
Also, for your fuel pump, I am doing my underside now also and my pump cradle is pretty shot, did u buy a bnew unit from Ford? I was lookin at the AS stainless jobbie they sell and may well go along with that, but I have to use my existing rubber flexi mounts, so not too sure yet.
What rear brake setup do you have?