EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
#1007
Originally Posted by PPSSSHH
so whens the headliner goin in your keepin me in suspense all you would tell me is that you had ideas???
#1011
Too many posts.. I need a life!!
Join Date: Sep 2003
Location: Belgium
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
what more to say.................... I just want to take 2 weeks off @ work and only work on my rpecious ..........to be honest it makes
me jealous!!!
me jealous!!!
#1014
Big thanks to Gadget who popped over today to fit the snap lok fittings for my fuel filter.
A few pics of what was done over the week end.
Got the fuel filter bracket welded up on sat.
Into primer.
Painted.
Fitted into place ready for Gary today.
Filter after Garys handywork
Gave the carbon cambelt cover a splash of lacquer.
Loom in place across bulkhead
Amel valve on custom bracket.
Thermostate housing on .
Wired up.
A few more shots of the loom.
A shot of the car ,not a great deal left to do ,just little bits really that take time .
A few pics of what was done over the week end.
Got the fuel filter bracket welded up on sat.
Into primer.
Painted.
Fitted into place ready for Gary today.
Filter after Garys handywork
Gave the carbon cambelt cover a splash of lacquer.
Loom in place across bulkhead
Amel valve on custom bracket.
Thermostate housing on .
Wired up.
A few more shots of the loom.
A shot of the car ,not a great deal left to do ,just little bits really that take time .
#1025
Cleaned up a few more of the remaining bits yesterday,here is a few piccys.Decieded to mount the servo cover a bit different,as i was not happy the way this is sandwiched in between servo and master cylinder,cut out a section on the cover so that it sat over the cylinder and would bond to the servo.
All marked out .
About 20mins later after attacking with the dremel
Servo cover edges sanded,and master cylinder bottle swopped over to my non abs one
Repolished the dizzy and cleaned the leads.
Dug out the chrome cap i bought at Essen last year and fitted it .
Got through the braided lines and fittings to go from the cylinder to the "t" pieces.
Ordered 3 new red hoses for the heater matrix outlets aswell,should arrive in the next few days ,hope you like it
All marked out .
About 20mins later after attacking with the dremel
Servo cover edges sanded,and master cylinder bottle swopped over to my non abs one
Repolished the dizzy and cleaned the leads.
Dug out the chrome cap i bought at Essen last year and fitted it .
Got through the braided lines and fittings to go from the cylinder to the "t" pieces.
Ordered 3 new red hoses for the heater matrix outlets aswell,should arrive in the next few days ,hope you like it
#1031
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
I haven't looked at this thread for such a long time, can't beleive sooooooooooooo much has taken place mate, I absolutely love the slam panel and bonnet hinges!
Gearbox looks awesome too, god there's so much that I think is fantastic!
Stunning job mate, can't wait to see it finished now!
Gearbox looks awesome too, god there's so much that I think is fantastic!
Stunning job mate, can't wait to see it finished now!
#1040
Another update ,got the brakes all plumbed in today (still to bleed) a few pics ,the white sealer around the servo is were i bonded on the chrome cover ,still to be painted black
Now the pipes are on i can paint up the fittings
Bottle rubber fitted ,thanks S1 JOHN
Water pipes going on
New oil feed pipe
Also big thanks to Ryan for sorting my loom labels Only got two decent shots though
Also fitted the bonnet on
Pretty chuffed with the bonnet hinges
Hope you like the pics
Now the pipes are on i can paint up the fittings
Bottle rubber fitted ,thanks S1 JOHN
Water pipes going on
New oil feed pipe
Also big thanks to Ryan for sorting my loom labels Only got two decent shots though
Also fitted the bonnet on
Pretty chuffed with the bonnet hinges
Hope you like the pics