EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
11-06-2005, 11:53 PM
#962
Originally Posted by BillyCabrio
Hmmmmmm not bad i spose!! 
Where did you get ya gearbox paint from Dave?
Where did you get ya gearbox paint from Dave?
12-06-2005, 10:03 AM
#963
OMFG! i have just spent last 2 hours reading this properly, 5 cups of coffee and 10 fags-fooking well impressed Puts what im doing on my red one to shame 
just a few questions i want to ask if ya dont mind dude.
Hiding the wiring loom etc, did you cut a hole in the front arch to thread it through from the fuse box?
Is it essential to have that "gutter" at the front to do this?
The flocking-what do they charge to do a dashboard?
The t piece for brakes etc are these still available new from ford then?
The braided brake lines, do these run straight under the car and if so where did you get them from dude to length required?
cheers matey
it looks well cool
Hopw to see this at a show this year
Puts what im doing on my red one to shame just a few questions i want to ask if ya dont mind dude.
Hiding the wiring loom etc, did you cut a hole in the front arch to thread it through from the fuse box?
Is it essential to have that "gutter" at the front to do this?
The flocking-what do they charge to do a dashboard?
The t piece for brakes etc are these still available new from ford then?
The braided brake lines, do these run straight under the car and if so where did you get them from dude to length required?
cheers matey
it looks well cool
Hopw to see this at a show this year
12-06-2005, 07:03 PM
#966
coming along excellent mate! cant wait to get mine back now...i think the next project will be the underside then dash while im saving up for the rear coilovers and engine..then attack the interior lol
well done again mate...
BTW looks like im keeping mine for abit longer now lol
bassboy
well done again mate...
BTW looks like im keeping mine for abit longer now lol
bassboy
12-06-2005, 10:27 PM
#968
Originally Posted by the sludge
OMFG! i have just spent last 2 hours reading this properly, 5 cups of coffee and 10 fags-fooking well impressed Puts what im doing on my red one to shame
just a few questions i want to ask if ya dont mind dude.
Hiding the wiring loom etc, did you cut a hole in the front arch to thread it through from the fuse box?
Is it essential to have that "gutter" at the front to do this?
The flocking-what do they charge to do a dashboard?
The t piece for brakes etc are these still available new from ford then?
The braided brake lines, do these run straight under the car and if so where did you get them from dude to length required?
cheers matey
it looks well cool Hopw to see this at a show this year
Puts what im doing on my red one to shame just a few questions i want to ask if ya dont mind dude.
Hiding the wiring loom etc, did you cut a hole in the front arch to thread it through from the fuse box?
Is it essential to have that "gutter" at the front to do this?
The flocking-what do they charge to do a dashboard?
The t piece for brakes etc are these still available new from ford then?
The braided brake lines, do these run straight under the car and if so where did you get them from dude to length required?
cheers matey
it looks well cool
Hopw to see this at a show this year
The gutter is not essential to run the loom but it does make it a lot easier
Got the "t" peices new from ford last week finis number 1583118 Ł6.08+ vat each
The braided lines ,you make up yourself,i got some from rally design and other parts from bsr aerotek 01386 849060 ,they have a website aswell,have not got the address to hand though,
hop this helps you
14-06-2005, 05:50 PM
#973
A few more piccys of the work so far
New studs and gasket.
Radiator cleaned painted and fitted.
Turbo on
Intercooler getting the autosol treatment.
Wiring up the fans
Got this yesterday aswell ,right result it being black as i was going to spray it anyway,just got to change the bottle over as my current one has no take off,s
At last my springs are ready ,picked them up today
Tommorow i am making a start on the engine loom ,and hopefully the suspension
New studs and gasket.
Radiator cleaned painted and fitted.
Turbo on
Intercooler getting the autosol treatment.
Wiring up the fans
Got this yesterday aswell ,right result it being black as i was going to spray it anyway,just got to change the bottle over as my current one has no take off,s
At last my springs are ready ,picked them up today
Tommorow i am making a start on the engine loom ,and hopefully the suspension
14-06-2005, 05:52 PM
#974
Originally Posted by 3drstretch
Is that alternator bracket on the wrong way round or have you done that on purpose to be different. 
Looking excellent mate.
Looking excellent mate.
14-06-2005, 11:10 PM
#980
Originally Posted by Brian
That is looking excellent mate 
Have you covered the wiring for the fan's in something?? If so what is it and where did you get it?? Because it look really good.
Brian
Have you covered the wiring for the fan's in something?? If so what is it and where did you get it?? Because it look really good.
Brian
www.vehicle-wiring-products.co.uk in sleeving section ,sold by the meter
15-06-2005, 09:55 AM
#982
Originally Posted by Twins
Originally Posted by the sludge
OMFG! i have just spent last 2 hours reading this properly, 5 cups of coffee and 10 fags-fooking well impressed Puts what im doing on my red one to shame
just a few questions i want to ask if ya dont mind dude.
Hiding the wiring loom etc, did you cut a hole in the front arch to thread it through from the fuse box?
Is it essential to have that "gutter" at the front to do this?
The flocking-what do they charge to do a dashboard?
The t piece for brakes etc are these still available new from ford then?
The braided brake lines, do these run straight under the car and if so where did you get them from dude to length required?
cheers matey
it looks well cool Hopw to see this at a show this year
Puts what im doing on my red one to shame just a few questions i want to ask if ya dont mind dude.
Hiding the wiring loom etc, did you cut a hole in the front arch to thread it through from the fuse box?
Is it essential to have that "gutter" at the front to do this?
The flocking-what do they charge to do a dashboard?
The t piece for brakes etc are these still available new from ford then?
The braided brake lines, do these run straight under the car and if so where did you get them from dude to length required?
cheers matey
it looks well cool
Hopw to see this at a show this year
The gutter is not essential to run the loom but it does make it a lot easier
Got the "t" peices new from ford last week finis number 1583118 Ł6.08+ vat each
The braided lines ,you make up yourself,i got some from rally design and other parts from bsr aerotek 01386 849060 ,they have a website aswell,have not got the address to hand though,
hop this helps you
15-06-2005, 11:22 PM
#986
Not much to show on todays update ,got the new bearings into the hubs
Spent all day re sleeving the cossie loom ,just a couple of wires to do ,but got to wait for some more of the smaller sleeve to turn up as i ran out
Getting there
Just need to place small cable ties onto the injector rubbers,then when all the loom is done i can clip it up into place
Hopefully will get some suspension on tomorrow.And will take some better pics of the loom.
Spent all day re sleeving the cossie loom ,just a couple of wires to do ,but got to wait for some more of the smaller sleeve to turn up as i ran out
Getting there
Just need to place small cable ties onto the injector rubbers,then when all the loom is done i can clip it up into place
Hopefully will get some suspension on tomorrow.And will take some better pics of the loom.
16-06-2005, 05:10 PM
#999
Spent a few hours on the car today and managed to get the front suspension on
Front struts ready to be assembled.
Anti roll bar plates bolted up (lots of copper slip on all the threads)
Bracket fitted for my Brembos.
As promised ,some better pics of the loom ,still not finished ,when all connected up will run across the bulkhead properly.
Crank sensor loom to be clipped into place aswell.
Hope you like them ,more at the weekend
Front struts ready to be assembled.
Anti roll bar plates bolted up (lots of copper slip on all the threads)
Bracket fitted for my Brembos.
As promised ,some better pics of the loom ,still not finished ,when all connected up will run across the bulkhead properly.
Crank sensor loom to be clipped into place aswell.
Hope you like them ,more at the weekend