RS1600i turbo, to be reborn
21-08-2007 | 12:33 PM
#204
Are these the rods you had made Andy???
Didn't realise either that the inlet was for you, when the pictures got posted on another thread, Thought Daz might be converting to EFi himself
Good progress
Didn't realise either that the inlet was for you, when the pictures got posted on another thread, Thought Daz might be converting to EFi himself
Good progress
21-08-2007 | 12:54 PM
#205
20K+ Super Poster.
Joined: Jun 2003
Posts: 22,888
Likes: 0
From: Local, when i'm home...
Originally Posted by AJC
Dan
i will do mate, only problem is my digital camera has broke, need a new one
yeah, was good to talk mate
i will do mate, only problem is my digital camera has broke, need a new one
yeah, was good to talk mate
I took it to ND and didn't take one picture!
21-08-2007 | 07:48 PM
#206
Originally Posted by Charlie Chalk
Are these the rods you had made Andy???
Didn't realise either that the inlet was for you, when the pictures got posted on another thread, Thought Daz might be converting to EFi himself
Good progress
Didn't realise either that the inlet was for you, when the pictures got posted on another thread, Thought Daz might be converting to EFi himself
Good progress
If It ain't broke, don't fix it!!! I really want to do it now though....
23-08-2007 | 06:09 PM
#207
Thread Starter
10K+ Poster!!
iTrader: (6)
Joined: Oct 2004
Posts: 13,366
Likes: 83
From: Preston, Lancs
Charlie Chalk
they came from austrailia mate, half the price
Dan
will PM you my address
DazC
its cause your too busy helping me
i will help you once the 16i of joy is finished
they came from austrailia mate, half the price
Dan
will PM you my address
DazC
its cause your too busy helping me
i will help you once the 16i of joy is finished
28-08-2007 | 08:18 AM
#212
Piccies!!
Sorry for the quality. Taken on a phone in night mode which requires a steady hand which I didn't have!! I was using night mode because the lighting was a little poor.
Block and crank
Pistons in and big ends on
Head
Head on
Back seat in and most of the interior back in
Sunroof in. Big job this one as the mechanism kept falling apart and jamming up and it was slightly too long.
New shiny head lamps!!! With approval of AJC!
Some assistance from a furry friend...
Sorry for the quality. Taken on a phone in night mode which requires a steady hand which I didn't have!! I was using night mode because the lighting was a little poor.
Block and crank
Pistons in and big ends on
Head
Head on
Back seat in and most of the interior back in
Sunroof in. Big job this one as the mechanism kept falling apart and jamming up and it was slightly too long.
New shiny head lamps!!! With approval of AJC!
Some assistance from a furry friend...
29-08-2007 | 09:00 PM
#215
PassionFord Post Troll
Joined: Mar 2006
Posts: 3,176
Likes: 2
From: st.annes, blackpool
lookin cool. was the cr what you wanted?! or were you checking for another reason? flying now andy youve done more this last 2 wks than ive managed in 2 months wait for meeee!
wait for meeee!
30-08-2007 | 11:49 AM
#218
Originally Posted by NEEDFORSPEED
lookin cool. was the cr what you wanted?! or were you checking for another reason? flying now andy youve done more this last 2 wks than ive managed in 2 months wait for meeee!
wait for meeee! The reason why it's flying along is money bags AJC has been spending his hard (moderately easy) earned and I've been building the engine and pointing him in the right direction!
09-09-2007 | 07:34 PM
#236
Thread Starter
10K+ Poster!!
iTrader: (6)
Joined: Oct 2004
Posts: 13,366
Likes: 83
From: Preston, Lancs
DazC
thursday night killed me !!!!!
NEEDFORSPEED
im still confused myself, i think im bi
some pics here for you mate
Billy_RST
would of compllimented it well, cheers for the comments
doggpk
your inlet will be with you soon, cheers
right..............
well the engine is in, along with s2 servo and brake set up
new ford battery
car sits beter now there is en engine in, i just want it a tad lower so will see how it dropps as more stuff is put on
enginie ready for gearbox
IN
how the donor car now looks
newpurchase, i oown 50 %
thursday night killed me !!!!!
NEEDFORSPEED
im still confused myself, i think im bi
some pics here for you mate
Billy_RST
would of compllimented it well, cheers for the comments
doggpk
your inlet will be with you soon, cheers
right..............
well the engine is in, along with s2 servo and brake set up
new ford battery
car sits beter now there is en engine in, i just want it a tad lower so will see how it dropps as more stuff is put on
enginie ready for gearbox
IN
how the donor car now looks
newpurchase, i oown 50 %
10-09-2007 | 04:18 PM
#240
Thread Starter
10K+ Poster!!
iTrader: (6)
Joined: Oct 2004
Posts: 13,366
Likes: 83
From: Preston, Lancs
NEEDFORSPEED
what can i say, you got a cab!!!!
Sidewayz
hopefully, fingers crossed, booked in in for exhaust today at blueflame.
so i need to get turbo, cooler, rad, alternator and gear linkage pretty sharpish
StickerPaul
thank you, that would be great paul, cheers
what can i say, you got a cab!!!!
Sidewayz
hopefully, fingers crossed, booked in in for exhaust today at blueflame.
so i need to get turbo, cooler, rad, alternator and gear linkage pretty sharpish
StickerPaul
thank you, that would be great paul, cheers