RS1600i turbo, to be reborn
#242
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NEEDFORSPEED
i didnt realise you were called jenifer thought it was just jenny!lol anyway where are we up to andy? any more pics?[/code]
#244
PassionFord Post Troll
Originally Posted by DazC
Originally Posted by NEEDFORSPEED
i didnt realise you were called jenifer thought it was just jenny!lol anyway where are we up to andy? any more pics?[/code]
#245
haha well i think you should never call me Jennifer and ill be happy! Jeni, Jen.. thats good
Mr C are you stil confused? Did the magazine not help Cant wait to see the car finished! And when you starting to smoke about in the s2, i wanna see it!
Daz C what about me comin to Mr C's then you can work on my car when he drops asleep
Mr C are you stil confused? Did the magazine not help Cant wait to see the car finished! And when you starting to smoke about in the s2, i wanna see it!
Daz C what about me comin to Mr C's then you can work on my car when he drops asleep
#246
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Miss C, Jenifer, you're welcome to come up to Mr C's house and the other Mr C will work on you car when Mr C falls asleep!! However that is usually around the midnight mark so you best bring the pro plus!!
Mr C is always confused!
The S2 is on low priority. It will sit there for the forseable future until the 16i is either finished or we get stuck.
Mr C is always confused!
The S2 is on low priority. It will sit there for the forseable future until the 16i is either finished or we get stuck.
#248
PassionFord Post Troll
Originally Posted by jeni8759
haha well i think you should never call me Jennifer and ill be happy! Jeni, Jen.. thats good
Mr C are you stil confused? Did the magazine not help Cant wait to see the car finished! And when you starting to smoke about in the s2, i wanna see it!
Daz C what about me comin to Mr C's then you can work on my car when he drops asleep
Mr C are you stil confused? Did the magazine not help Cant wait to see the car finished! And when you starting to smoke about in the s2, i wanna see it!
Daz C what about me comin to Mr C's then you can work on my car when he drops asleep
oh god hes confused again!!
#252
PassionFord Post Troll
Originally Posted by AJC
rsturbo90
always been that way any way
NEEDFORSPEED
now not confused
doggpk
cheers
well, tonight, i have fitted intercooler rad and turbo,
daz has stripped the wiring loom and i was confused and worried
pics to follow soon....
always been that way any way
NEEDFORSPEED
now not confused
doggpk
cheers
well, tonight, i have fitted intercooler rad and turbo,
daz has stripped the wiring loom and i was confused and worried
pics to follow soon....
#257
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
MFI wiring junk now removed and the loom now looks like it's been to weight watchers!!
Nothing but lights, wipers and horn left in the loom. Now all taped up in loom tape (not insulation tape). My fingers were fooking sticky.
The engine in now officially under new management!!
Nothing but lights, wipers and horn left in the loom. Now all taped up in loom tape (not insulation tape). My fingers were fooking sticky.
The engine in now officially under new management!!
#258
PassionFord Post Troll
Originally Posted by DazC
MFI wiring junk now removed and the loom now looks like it's been to weight watchers!!
Nothing but lights, wipers and horn left in the loom. Now all taped up in loom tape (not insulation tape). My fingers were fooking sticky.
The engine in now officially under new management!!
Nothing but lights, wipers and horn left in the loom. Now all taped up in loom tape (not insulation tape). My fingers were fooking sticky.
The engine in now officially under new management!!
#263
thank you for the pics daz, i aint lazy, just my computers crap and disconnects at its own free will
mark, its a Pro Alloy and may end up getting changed for a GRS one
well. i have just got hom from dropping the car of at blueflame so the can work their magic
im having a 3 inch system all the way through, 9x6 back box and 3 and 1/2 inch outward rolled tip essential on any mk3/4 escort
the Central Locking has ben done so door cards are back on
interior virtually complete, just need to put sill covers bck on but need to run speaker wire first
the intercooler, rad, turbo all fitted, alon with alternator and gear linkage.
drive shafts have also been re fit and the enine mounts changed for vibra technic ones.
ive had all my engine 'dress up' parts powder coated black as i didnot want a bling bling engine bay. the only chromey bit is going to be bonnet stay.
any way, let the pictures do the talking
mark, its a Pro Alloy and may end up getting changed for a GRS one
well. i have just got hom from dropping the car of at blueflame so the can work their magic
im having a 3 inch system all the way through, 9x6 back box and 3 and 1/2 inch outward rolled tip essential on any mk3/4 escort
the Central Locking has ben done so door cards are back on
interior virtually complete, just need to put sill covers bck on but need to run speaker wire first
the intercooler, rad, turbo all fitted, alon with alternator and gear linkage.
drive shafts have also been re fit and the enine mounts changed for vibra technic ones.
ive had all my engine 'dress up' parts powder coated black as i didnot want a bling bling engine bay. the only chromey bit is going to be bonnet stay.
any way, let the pictures do the talking
#265
Engine in, cooler, turbo etc
Bailey Header tank
Cheap as Pro Alloy Rad
Gasket matching the exhaust gasket
Cooler in
Charge Carrier, Boss for Sensor removed and been shot blast
Omex loom run in and just cable tied out the way for the time being
Full cossie T34
Bailey Header tank
Cheap as Pro Alloy Rad
Gasket matching the exhaust gasket
Cooler in
Charge Carrier, Boss for Sensor removed and been shot blast
Omex loom run in and just cable tied out the way for the time being
Full cossie T34
#266
Advanced PassionFord User
love this car ....watch that rocker cover if its been powder coated...heard of a few people killing brand new engines cos of a rocker cover that had a spot of sand blasting before coating.....sand sitting under the breather plate would ruin such a well specced engine...love the work so far