RS1600i turbo, to be reborn
#168
Originally Posted by DazC
Originally Posted by Lee Reynolds
DazC
Aye, you can tell he doesnt need the cash
Aye, you can tell he doesnt need the cash
hoping to have the car done in a round 6 weeks or so, noot that much to do to get it finished,
the quaife box is CTS stage 2 box
than you all for the postive replies,
hope to do some work on it sunday so i will update again then wth some new pictures,
and mike, not only will it be on the road first, it will be faster
#174
today
carpet in, front bumper, lights, indicaotrs, rear door cards, A,B,C pillar trims, wiper motor back on, rear spolier, bit more headlining work done,
some wiring removed, old alarm ripped out,
would of got seats in but i am short of a T45 torque bit so that will have to wait till midweek
carpet in, front bumper, lights, indicaotrs, rear door cards, A,B,C pillar trims, wiper motor back on, rear spolier, bit more headlining work done,
some wiring removed, old alarm ripped out,
would of got seats in but i am short of a T45 torque bit so that will have to wait till midweek
#177
Lee Reynolds
you have PM
andyt
thank you
few update pics, the interir startinig to go back in, front end on minus splitter, needs some wiring before dash can go in, will crack on tonight, i think
mirrors on, spolier, hom made sound deadening, under bonnet paint shot
you have PM
andyt
thank you
few update pics, the interir startinig to go back in, front end on minus splitter, needs some wiring before dash can go in, will crack on tonight, i think
mirrors on, spolier, hom made sound deadening, under bonnet paint shot
#178
PassionFord Post Troll
Join Date: Jul 2005
Location: liverpool
Posts: 2,665
Likes: 0
Received 0 Likes
on
0 Posts
getting there now mate, looks truly mint. hurry up and get it done and run in i want to see this fooker go
and also i will give you a grand a vectra for it when its all done
and also i will give you a grand a vectra for it when its all done
#189
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Pictures on behalf of Andy. Quality isn't too good as they were taken on just a standard setting on the camera and at night in poor light.
Dodgy pink block
Masked up for painting
Block now painted in black
Back bench top half in
Front spoiler on.
Dodgy pink block
Masked up for painting
Block now painted in black
Back bench top half in
Front spoiler on.
#193
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Just an update on this car...
Whilst Mr AJC is away in a hotel prior to National day, I have been busy in the garage...
Just in the process of converting the inlet to EFI. The original holes need opening up to 14mm and some of the material removing around the injector area to clear the EFI injectors. Once that is done, a Fiesta EFI fuel rail needs to be fitted with a pair of lugs welded to the inlet manifold to hold it in place.
Also reaming the small ends out on the conrods to fit the pistons in a fully floating manner instead of the standard semi floating manner.
Whilst Mr AJC is away in a hotel prior to National day, I have been busy in the garage...
Just in the process of converting the inlet to EFI. The original holes need opening up to 14mm and some of the material removing around the injector area to clear the EFI injectors. Once that is done, a Fiesta EFI fuel rail needs to be fitted with a pair of lugs welded to the inlet manifold to hold it in place.
Also reaming the small ends out on the conrods to fit the pistons in a fully floating manner instead of the standard semi floating manner.
#195
PassionFord Post Troll
looks good, will be loads better with a decent size plenum wont it rather than the efi one. you going to use a different idle valve? i think you should! not that you really need it once warm but . . good work! you not going to national day daz?
#197
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NEEDFORSPEED
looks good, will be loads better with a decent size plenum wont it rather than the efi one. you going to use a different idle valve? i think you should! not that you really need it once warm but . . good work! you not going to national day daz?
I'm not bothering with National day this year to ba honest Mark. First one i've missed in 7 years but I can't be arsed. Last year was shit and I've never heard a good word about Rockingham other than it's got 80 acres of concrete to park your car on.