Viper Power Kit Car!!!! UPDATE on page 6 now
#121
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Grimsby
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mark_24v_wiring
If any one is near Newark over the weekend it will be at the kit car show and yes ill start it up lol
#123
PassionFord Post Troll
Sounds luuuurvely.
With all this talk of tyre burning, no traction etc, what management are you using for it (ie one with launch control?), or would you fit an aftermarket on, or simply not bother.
With all this talk of tyre burning, no traction etc, what management are you using for it (ie one with launch control?), or would you fit an aftermarket on, or simply not bother.
#125
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Kent
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Graham S1
Sounds luuuurvely.
With all this talk of tyre burning, no traction etc, what management are you using for it (ie one with launch control?), or would you fit an aftermarket on, or simply not bother.
With all this talk of tyre burning, no traction etc, what management are you using for it (ie one with launch control?), or would you fit an aftermarket on, or simply not bother.
Rob84
Come make ya self known mate im sure i wont be far away from the car most of the weekend. It will be on the Luego owners stand
#129
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
#133
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cossie4i
Originally Posted by Dan
You got a rad connected to that thing?
Steve.
#134
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Kent
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Will get a rad in there as soon as but for now total runtime would be no more than 2 min in about 30 sec bursts so its not a problem will sort something out for the weekend as im sure people will want it run more than we should without one
#138
Too many posts.. I need a life!!
Join Date: Oct 2006
Location: Chapelhall, near glasgow
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Ooooooops
sorry about making an arse of the link, ex-finesse got it right. so to him
was in a hurry to type it out as had to get into glasgow airport to get a plane to the states
your project has progressed a little bit in the time i was away
sorry about making an arse of the link, ex-finesse got it right. so to him
was in a hurry to type it out as had to get into glasgow airport to get a plane to the states
your project has progressed a little bit in the time i was away
#142
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Kent
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Think ill sort a water system out today the more i think about it the better the idea sounds as im sure ill be running it up too much over the weekend and i dont want to bugger it up.
Still got more wiring to do i need to get the O2 sensors working alternator now works (its ecu controled!!) then i ned to tidy it all up so it looks nice for the weekend oh yeh i suppose i had better finish the suspension and get some wheels on it lol
Still got more wiring to do i need to get the O2 sensors working alternator now works (its ecu controled!!) then i ned to tidy it all up so it looks nice for the weekend oh yeh i suppose i had better finish the suspension and get some wheels on it lol
#143
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Grimsby
Posts: 1,267
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mark_24v_wiring
Originally Posted by Graham S1
Sounds luuuurvely.
With all this talk of tyre burning, no traction etc, what management are you using for it (ie one with launch control?), or would you fit an aftermarket on, or simply not bother.
With all this talk of tyre burning, no traction etc, what management are you using for it (ie one with launch control?), or would you fit an aftermarket on, or simply not bother.
Rob84
Come make ya self known mate im sure i wont be far away from the car most of the weekend. It will be on the Luego owners stand
#145
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Kent
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Right ready for the weekend now on wheels and rolling with water system plumbed up and starting will be off for more chassis work next week then soon after that diff prop and drive shafts then exhausts then full strip down paint and rebiuld
So lots to do still but hey ou get the idea better now.
So lots to do still but hey ou get the idea better now.
#146
I've found that life I needed.. It's HERE!!
Originally Posted by mark_24v_wiring
Right ready for the weekend now on wheels and rolling with water system plumbed up and starting will be off for more chassis work next week then soon after that diff prop and drive shafts then exhausts then full strip down paint and rebiuld
So lots to do still but hey ou get the idea better now.
So lots to do still but hey ou get the idea better now.
#151
I've found that life I needed.. It's HERE!!
Originally Posted by Ginge !
are they 16ins wheels off a 4x4 granada ?
#152
I've found that life I needed.. It's HERE!!
Originally Posted by miller3
How long till its finished' Do you recon
#154
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Kent
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Its just nice to see that you all like it.
One guy came up to us yesterday and said Is it going to be a cobra? when i said no its going to be a 7 he just looked at me and said shit!! lol
Aparently loads of people were in talking to the guys that own the kit car company on the back of seeing the viper which can only be good for everyone that owns a Luego.
Taking it on wednesday to be looked at for some more strength to be added and have a few bits im not happy with that need to be moved etc etc we have a bonnet now so we can lower the engine so it fits under the std body work its only about an inch out at the front and the back has to go down as the gearbox output is too high in relation to the diff input pedal box should arrive this week.
Most of the rest of it is out of our control as to time wise as its all depends on how long its going to take to get these things completed before full strip down but it will drive before we do strip it down.............................................. .........wonder if santa pod will let me run it there with no body work on it lol
One guy came up to us yesterday and said Is it going to be a cobra? when i said no its going to be a 7 he just looked at me and said shit!! lol
Aparently loads of people were in talking to the guys that own the kit car company on the back of seeing the viper which can only be good for everyone that owns a Luego.
Taking it on wednesday to be looked at for some more strength to be added and have a few bits im not happy with that need to be moved etc etc we have a bonnet now so we can lower the engine so it fits under the std body work its only about an inch out at the front and the back has to go down as the gearbox output is too high in relation to the diff input pedal box should arrive this week.
Most of the rest of it is out of our control as to time wise as its all depends on how long its going to take to get these things completed before full strip down but it will drive before we do strip it down.............................................. .........wonder if santa pod will let me run it there with no body work on it lol
#158
Testing the future
Stavros i think you're right to be concerned. certainly the thing that is in there at the moment doesn't look like it will (will be ok to just run it up without load though)
#159
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Kent
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
The rad thats there at the moment was just to hold some water for the weekend totaly a temp soultion so it was poss to run the engine up under no load.
Std water system on a viper is only 15 liters so its not as much as i thought but were having a radiator built just for this, cooling is an issue in kit cars any way so were going to let a decent radiator company figure it out and there will be air vents in the side pannels to allow the heat out etc etc so it should be ok by the time its done.
Std water system on a viper is only 15 liters so its not as much as i thought but were having a radiator built just for this, cooling is an issue in kit cars any way so were going to let a decent radiator company figure it out and there will be air vents in the side pannels to allow the heat out etc etc so it should be ok by the time its done.