Turboed ST170, 6 speed ERST now ZVH & GT30.......RIP.
#241
PassionFord Post Whore!!
Join Date: Oct 2005
Location: aberdeenshire
Posts: 7,346
Likes: 0
Received 0 Likes
on
0 Posts
theres going to be some crazy fwd cars coming out of the sheds & garages next year.cant wait (i have to get a move on )
any pictures simon??
is that clutch any cheeper than the last one mate?
good luck with it any way
any pictures simon??
is that clutch any cheeper than the last one mate?
good luck with it any way
#242
I've found that life I needed.. It's HERE!!
Join Date: Apr 2005
Location: Northants
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by smitsturbo
theres going to be some crazy fwd cars coming out of the sheds & garages next year.cant wait (i have to get a move on )
any pictures simon??
is that clutch any cheeper than the last one mate?
good luck with it any way
any pictures simon??
is that clutch any cheeper than the last one mate?
good luck with it any way
but im not going for to much power tho
#243
should be good!
Thread Starter
Originally Posted by smitsturbo
theres going to be some crazy fwd cars coming out of the sheds & garages next year.cant wait (i have to get a move on )
any pictures simon??
good luck with it any way
any pictures simon??
is that clutch any cheeper than the last one mate?
#244
Lukesville
iTrader: (2)
Originally Posted by sas
Originally Posted by smitsturbo
theres going to be some crazy fwd cars coming out of the sheds & garages next year.cant wait (i have to get a move on )
any pictures simon??
good luck with it any way
any pictures simon??
is that clutch any cheeper than the last one mate?
#245
should be good!
Thread Starter
Originally Posted by m4dyeti
Originally Posted by sas
Originally Posted by smitsturbo
theres going to be some crazy fwd cars coming out of the sheds & garages next year.cant wait (i have to get a move on )
any pictures simon??
good luck with it any way
any pictures simon??
is that clutch any cheeper than the last one mate?
Its running and I have ran it through the gears up on the stands, so far it all works fine.
Got to tweek the cam timing and drop it on the deck, then make my new laptop talk to the Pectel ECU and we are off!!!!!!!!!!!!!!!!!
Just on my tea break at the mo.
S.
#247
should be good!
Thread Starter
#250
should be good!
Thread Starter
Originally Posted by KSA-Cossie
Come on si i'm gagging for a hurl in the beast.
S.
#256
should be good!
Thread Starter
Originally Posted by alistairolsen
awesome project! What do you run castor and toe wise? about 3 degrees castor, 1.5 degrees neg camber and 0.5-0.7mm toe out?
S.
#265
Borg Warner EFR Equipped!
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes
on
2 Posts
Captain Mike
Still not got my shell back - been away 2 years now.
That and the fact that my gudgeon pin circlips and top rings were 'lost' when i resigned from my previous employer
Once i get those replaced i can build the engine
Still not got my shell back - been away 2 years now.
That and the fact that my gudgeon pin circlips and top rings were 'lost' when i resigned from my previous employer
Once i get those replaced i can build the engine
#266
I've found that life I needed.. It's HERE!!
Join Date: Oct 2007
Location: Straight outta Essex
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Gus,
Engine is back out and still playing with the mounts for the MTX75 which I will have completed soon. Hence the sreamer pipe is not welded until the engine is in it final resting position.
Hopefully dyno in January just depends on Ahmeds availability, just sorting some final bits for the new box and bar a few minor jobs she will be ready to go. Although I have been speaking with a custom exhaust company about a new manifold and system. So may have that done before I MOT her. New 18" s etc etc, never seems to be enough cash!!
Si,
Thanks for the advice and sorry for hijacking your thread!
Engine is back out and still playing with the mounts for the MTX75 which I will have completed soon. Hence the sreamer pipe is not welded until the engine is in it final resting position.
Hopefully dyno in January just depends on Ahmeds availability, just sorting some final bits for the new box and bar a few minor jobs she will be ready to go. Although I have been speaking with a custom exhaust company about a new manifold and system. So may have that done before I MOT her. New 18" s etc etc, never seems to be enough cash!!
Si,
Thanks for the advice and sorry for hijacking your thread!
#267
should be good!
Thread Starter
Originally Posted by RAT8OY
Gus,
Engine is back out and still playing with the mounts for the MTX75 which I will have completed soon. Hence the sreamer pipe is not welded until the engine is in it final resting position.
Hopefully dyno in January just depends on Ahmeds availability, just sorting some final bits for the new box and bar a few minor jobs she will be ready to go. Although I have been speaking with a custom exhaust company about a new manifold and system. So may have that done before I MOT her. New 18" s etc etc, never seems to be enough cash!!
Si,
Thanks for the advice and sorry for hijacking your thread!
Engine is back out and still playing with the mounts for the MTX75 which I will have completed soon. Hence the sreamer pipe is not welded until the engine is in it final resting position.
Hopefully dyno in January just depends on Ahmeds availability, just sorting some final bits for the new box and bar a few minor jobs she will be ready to go. Although I have been speaking with a custom exhaust company about a new manifold and system. So may have that done before I MOT her. New 18" s etc etc, never seems to be enough cash!!
Si,
Thanks for the advice and sorry for hijacking your thread!
No worries, we are all one.
Looking forward to seeing yours in the flesh.
S.
#274
should be good!
Thread Starter
Originally Posted by m4dyeti
Evening Si,
How is the new set up going, is hanging on in there.
How is the new set up going, is hanging on in there.
Bit of a disapointment to miss the Thrash, was waiting for a new electric water pump. The resistance in the motor on my old one was starting to increase as the pump warmed up. That is proberly why I have cooling issues with engine most of the summer!
The clutch and flywheel is a sucsess, no issues at all with it. Just fit and forget, nothing to mod.
It all means looking good for next season, will hit the ground with my feet running. This year just tried to do too much, and never really cought up!!
S.
#276
should be good!
Thread Starter
Originally Posted by rapidcossie
Give me a shout if you want to run it on AVA's rollers and get a real power reading
Cheers Euan, sooner or later I will be on AVA rolling road!
S.
#278
PassionFord Post Whore!!
glad to se its all back to gether now and sorted.
you should find out if pf will let you run at brunters when yum goes back with his new box if you wanna get some times in soon
you should find out if pf will let you run at brunters when yum goes back with his new box if you wanna get some times in soon
#279
Lukesville
iTrader: (2)
Originally Posted by sas
Originally Posted by m4dyeti
Evening Si,
How is the new set up going, is hanging on in there.
How is the new set up going, is hanging on in there.
Bit of a disapointment to miss the Thrash, was waiting for a new electric water pump. The resistance in the motor on my old one was starting to increase as the pump warmed up. That is proberly why I have cooling issues with engine most of the summer!
The clutch and flywheel is a sucsess, no issues at all with it. Just fit and forget, nothing to mod.
It all means looking good for next season, will hit the ground with my feet running. This year just tried to do too much, and never really cought up!!
S.
Good news mate Next year will be brilliant, and you have a good few months to bed things in and set up.
Il be in touch regarding flywheel