my project 1.8 zetec mk3 fiesta van
06-11-2006, 08:38 PM
#1
15000
Thread Starter
Join Date: Apr 2004
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
my project 1.8 zetec mk3 fiesta van
When i bought it:
I then broke the gearbox
How it stands atm:
(pics only show some of the change:
now running a diesel box
fronts seats changed for recaros
full stainless exhaust with 3.5 rolled out tip
Smooth boot
rs options rear bumper
Red rear lights
4x4 cossie disks and calipers)
Mods to come:
Get rid of the damn stripes
filler cap area redone
refit drivers side skirt
general freshen up
tidy engine bay
Frst bonnet
Zetec-s rear bumper
Change of wheels (preferable ford but unsure atm, was thinking 15in zetec-s phase one wheels with st170 centre caps)
Zetec-s rear beam
Vr6 front splitter
mk3.5 door mirrors
Poss junk the zetec and go for a rst engine.
I then broke the gearbox
How it stands atm:
(pics only show some of the change:
now running a diesel box
fronts seats changed for recaros
full stainless exhaust with 3.5 rolled out tip
Smooth boot
rs options rear bumper
Red rear lights
4x4 cossie disks and calipers)
Mods to come:
Get rid of the damn stripes
filler cap area redone
refit drivers side skirt
general freshen up
tidy engine bay
Frst bonnet
Zetec-s rear bumper
Change of wheels (preferable ford but unsure atm, was thinking 15in zetec-s phase one wheels with st170 centre caps)
Zetec-s rear beam
Vr6 front splitter
mk3.5 door mirrors
Poss junk the zetec and go for a rst engine.
Trending Topics
14-11-2006, 05:15 PM
#8
15000
Thread Starter
Join Date: Apr 2004
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
got bored today so Painted up a new rocker cover for the van
take one battered zetec cam cover
Give it a couple of coats of high temp paint
GIve it a couple of coats of gloss black and some finishing touches
And its done (sorry for crap pics they are off my phone)
take one battered zetec cam cover
Give it a couple of coats of high temp paint
GIve it a couple of coats of gloss black and some finishing touches
And its done (sorry for crap pics they are off my phone)
10-12-2006, 05:59 PM
#9
15000
Thread Starter
Join Date: Apr 2004
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
got it on the rollers yesterday, not a good day was hoping for 130hp
got 105hp with 110lbs or torque
fuelling is spot on, been told to check timing.
decided to run this lump for now, but going to replace with a 2ltr running on megasquirt and then build from there
pics + video
got 105hp with 110lbs or torque
fuelling is spot on, been told to check timing.
decided to run this lump for now, but going to replace with a 2ltr running on megasquirt and then build from there
pics + video
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
