My 3dr Cosworth project updated (16.01.12)*
26-11-2006, 04:44 PM
#362
Right then, as i have not done a update since April i though it best to do one after speaking to Jim today about his.
Not alot really has been done due to not really being bothered
this year.
Got a gearbox on it but not pics as im sure you've all seen a dirty gearbox before lol
Got a few alloy brackets and pulley's off Scotty, im going to polish these up then get them anodised.
Geniune Rs500 cooler is on
Radiator, Alternator, Thermostat housing, Water pump, Samco's and Throttle body now on, more has been added since these pics were taken ages ago
Got bored one day so decided to bling up the thermostat housing
Also i bought Rod's Dymags off him and had them powder coated
Lastly for this update AP 6 pots with 330mm disks, wanted 356mm but they were never going to fit
Not alot really has been done due to not really being bothered
this year.Got a gearbox on it but not pics as im sure you've all seen a dirty gearbox before
lolGot a few alloy brackets and pulley's off Scotty, im going to polish these up then get them anodised.
Geniune Rs500 cooler is on
Radiator, Alternator, Thermostat housing, Water pump, Samco's and Throttle body now on, more has been added since these pics were taken ages ago
Got bored one day so decided to bling up the thermostat housing
Also i bought Rod's Dymags off him and had them powder coated
Lastly for this update AP 6 pots with 330mm disks, wanted 356mm but they were never going to fit
04-01-2007, 05:44 PM
#375
Done some more on the car the last few days.
Mounted the passenger seat, put the dash in all wired up.
Also done some work in the engine bay, all the tanks are in, only the standard ones so i can get the car running as i will be having some custom made tanks at some point.
Here are just a few pics off my phone as the camera is dead at the mo,
Mounted the passenger seat, put the dash in all wired up.
Also done some work in the engine bay, all the tanks are in, only the standard ones so i can get the car running as i will be having some custom made tanks at some point.
Here are just a few pics off my phone as the camera is dead at the mo,
05-01-2007, 03:30 AM
#380
Originally Posted by smitsturbo
nice mate 
i have read the first few pages then just looked at the pictures
what happined to your flocked dash & your mo 6's?
i have read the first few pages then just looked at the pictures
what happined to your flocked dash & your mo 6's?
What is was when i pulled alot of the bits off was i was having a bit of a downer with the car and had found something else i wanted so i took alot of the parts off and was selling up but then changed my mind again and desided to stick with it so had to go about getting the bits again.
As with the 18" Mo's i was unhappy with how they looked on the car so sold them and got 17"s again as i think they look better on the 3dr's
Just my opinion but its my car lol
To every one else thanks for the positive comments
looking good dude keep it up
06-01-2007, 03:13 AM
#385
PassionFord Post Whore!!
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Looking good Gav keep it up i glad to see im not the only one to have got behind with the rebuild how long has it been now 
Mines around 18months
how long has it been now Mines around 18months
13-01-2007, 03:54 PM
#390
I got some cheap mounting brackets from Demon Tweeks and just drilled and bolted to standard sliders.
Only thing is you have to put the seat in the bracket one hole higher on the side that is closest to the door as the standard sliders are on the piss.
Only thing is you have to put the seat in the bracket one hole higher on the side that is closest to the door as the standard sliders are on the piss.
15-01-2007, 10:08 AM
#394
Originally Posted by Vic
thanks Gav,
did it make the seat any higher than the factory recaro?
did it make the seat any higher than the factory recaro?
This is the ones i got, just some cheap OMP ones.
http://www.demon-tweeks.co.uk/produc...pcode=OMPHC733
