My 397BHP Zetec Turbo 3dr. Its over...
27-04-2006, 10:57 AM
#163
cheers guys
its not even at the body shop yet mate, hopefully will be very near to going in this weekend
not using a YB as i want to be different, ive yet seen a zetec/zetec turbo in a sierra yet!
and yes, the burnout was funny as
Originally Posted by Dunc Maclean
looking good matey! i wanna see more pics of the shell getting sprayed 
u had any thoughts on colour yet?
just out of interest, how come ur goin zetec and not YB?
LOL @ the burnout in the 06 plater foc
lol
Dunc
u had any thoughts on colour yet?just out of interest, how come ur goin zetec and not YB?
LOL @ the burnout in the 06 plater foc
lolDunc
not using a YB as i want to be different, ive yet seen a zetec/zetec turbo in a sierra yet!
and yes, the burnout was funny as
28-04-2006, 10:49 AM
#166
another update
i spend all day on weds with my hands in a bowl of Jizer de-greaser and now my hands are proppa fukked, all the skin is coming off and they gone well manky
anyhow, this was why.
stripped and totally cleaned the CV joints (can see how shitty they were)
cleaned up the shafts and CV housings then painted them black
and also painted the rear beam - its all brush painted but looks ok, and it will do lol
roll on tomoz where the complete car will be stripped!
more pics next week
i spend all day on weds with my hands in a bowl of Jizer de-greaser and now my hands are proppa fukked, all the skin is coming off and they gone well manky
anyhow, this was why.
stripped and totally cleaned the CV joints (can see how shitty they were)
cleaned up the shafts and CV housings then painted them black
and also painted the rear beam - its all brush painted but looks ok, and it will do lol
roll on tomoz where the complete car will be stripped!
more pics next week
28-04-2006, 10:50 AM
#167
Mr. Sparkle!
Join Date: Nov 2005
Location: Wiltshire - swindon
Posts: 12,775
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fudgeass
Originally Posted by sidewayz
nice block, who's doing the body shop stuff
im sure it said machining the 1st time i looked paint job is being done at weston accident repair centre, part of chippenham accident repair centre, but in weston
28-04-2006, 11:02 AM
#170
PassionFord Post Whore!!
Join Date: May 2004
Location: Oldham + Fast Ford
Posts: 4,657
Likes: 0
Received 0 Likes
on
0 Posts
Those burnout pics are class!!!
fooked the tyres!
i was behind in the Silver ST........ and It fookin reeked!
"i love the smell of tyre smoke in the morning!"
28-04-2006, 11:05 AM
#172
PassionFord Post Whore!!
Join Date: May 2004
Location: Oldham + Fast Ford
Posts: 4,657
Likes: 0
Received 0 Likes
on
0 Posts
My bird was in the car with me covo went something like-
"ooh whats up with dans car??"
"nowt...he's doin a burnout the barmy coount!"
"why??"
"just because, you daft splitarse"
"ooh whats up with dans car??"
"nowt...he's doin a burnout the barmy coount!"
"why??"
"just because, you daft splitarse"
28-04-2006, 11:13 AM
#173
Wanna be whore...
Join Date: Jan 2006
Location: Essex
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by pornstar!
My bird was in the car with me covo went something like-
"ooh whats up with dans car??"
"nowt...he's doin a burnout the barmy coount!"
"why??"
"just because, you daft splitarse"
"ooh whats up with dans car??"
"nowt...he's doin a burnout the barmy coount!"
"why??"
"just because, you daft splitarse"
02-05-2006, 11:35 AM
#177
as promised, some pics from sat when i took to the car with the angle grinder
removed all this
to leave me with this
i couldnt quite get to a nut on the down pipe, so cracked out the angle grinder to lop it off, heres steve having a go. i didnt get any pics of when a disc shatterd and cut my arm to fukkery, soz
kin raaay, on its way out. going
goin...
gone!
next was to remove all this carp
and then i took the cage and dash back out
and then rip out the complete wiring loom
surely i wont be needing all this!
removed all this
to leave me with this
i couldnt quite get to a nut on the down pipe, so cracked out the angle grinder to lop it off, heres steve having a go. i didnt get any pics of when a disc shatterd and cut my arm to fukkery, soz
kin raaay, on its way out. going
goin...
gone!
next was to remove all this carp
and then i took the cage and dash back out
and then rip out the complete wiring loom
surely i wont be needing all this!
02-05-2006, 12:10 PM
#181
PassionFord Post Troll
Dan,
Remember those bulk head mods we talked about? I think you might want to go for them. Re-locating Col's thermostat housing is turning out to be a complete c-unit of a job!
I will have a measure up when next at Col's and give you some dimensions of the box you need to put in the bulk head.
Should be fairly easy to cut out / weld in.
Will the body shop weld it in for you?
Remember those bulk head mods we talked about? I think you might want to go for them. Re-locating Col's thermostat housing is turning out to be a complete c-unit of a job!
I will have a measure up when next at Col's and give you some dimensions of the box you need to put in the bulk head.
Should be fairly easy to cut out / weld in.
Will the body shop weld it in for you?
02-05-2006, 12:34 PM
#182
Too many posts.. I need a life!!
Join Date: Nov 2005
Location: ...
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Garage19
Dan,
Will the body shop weld it in for you?
Will the body shop weld it in for you?
Good pics Fudge, Looks loads better now.
Have you got ne pics of you destroying that fookin front bumper
02-05-2006, 12:54 PM
#184
Originally Posted by Garage19
Dan,
Remember those bulk head mods we talked about? I think you might want to go for them. Re-locating Col's thermostat housing is turning out to be a complete c-unit of a job!
I will have a measure up when next at Col's and give you some dimensions of the box you need to put in the bulk head.
Should be fairly easy to cut out / weld in.
Will the body shop weld it in for you?
Remember those bulk head mods we talked about? I think you might want to go for them. Re-locating Col's thermostat housing is turning out to be a complete c-unit of a job!
I will have a measure up when next at Col's and give you some dimensions of the box you need to put in the bulk head.
Should be fairly easy to cut out / weld in.
Will the body shop weld it in for you?
arse.
im sure the very nice people at the bodyshop will do it lol
is colins in now?
any news on the sump lol?
02-05-2006, 12:55 PM
#185
Originally Posted by smithy20vt
Originally Posted by Garage19
Dan,
Will the body shop weld it in for you?
Will the body shop weld it in for you?
Good pics Fudge, Looks loads better now.
Have you got ne pics of you destroying that fookin front bumper
as much as i want to, its gonna go back on ebay with the other one and hopefully get a few quid for em lol
02-05-2006, 01:36 PM
#189
PassionFord Post Troll
Originally Posted by fudgeass
Originally Posted by Garage19
Dan,
Remember those bulk head mods we talked about? I think you might want to go for them. Re-locating Col's thermostat housing is turning out to be a complete c-unit of a job!
I will have a measure up when next at Col's and give you some dimensions of the box you need to put in the bulk head.
Should be fairly easy to cut out / weld in.
Will the body shop weld it in for you?
Remember those bulk head mods we talked about? I think you might want to go for them. Re-locating Col's thermostat housing is turning out to be a complete c-unit of a job!
I will have a measure up when next at Col's and give you some dimensions of the box you need to put in the bulk head.
Should be fairly easy to cut out / weld in.
Will the body shop weld it in for you?
arse.
im sure the very nice people at the bodyshop will do it lol
is colins in now?
any news on the sump lol?
I think you will need a small box cut into the top edge of the bulkhead. Nothing too dramatic. It should be a peice of wee for a man with your skills. Just get a nice thin (1mm) cutting disk for your grinder. I might be able to get you some steel cut/bent if you get really stuck!
Your sump is cut up and sat in the corner of Col's workshop waiting for fabrication.
02-05-2006, 01:41 PM
#190
nice one dougie!!
im an expert with the angle grinder you should have seen my arm, i thought i cut the fukka off
i have got some 1mm discs so thats cool
how far is col off from turning the key then?
dont spose you can get any pics of the guys working on the sump for the mag can you please?
cheers boyo
im an expert with the angle grinder
you should have seen my arm, i thought i cut the fukka off i have got some 1mm discs so thats cool
how far is col off from turning the key then?
dont spose you can get any pics of the guys working on the sump for the mag can you please?
cheers boyo
02-05-2006, 01:49 PM
#191
PassionFord Post Troll
Fookin lethal really, angle grinders.
Dropped one on my shin a while back. Got it butterfly stictched up cos i was too much of a pussy to have propper stitches
He needs to finish his new inlet manifold as we lost the old one We think it fell out of the boot of the BM at brunters
New exhaust is pretty much made apart from down pipe.
Just got to order GT30, injectors and ECU this month and it should be pretty much there. Oh and make a new cambelt tensioner
Then she will be ready for mapping.
Dropped one on my shin a while back. Got it butterfly stictched up cos i was too much of a pussy to have propper stitches
He needs to finish his new inlet manifold as we lost the old one
We think it fell out of the boot of the BM at brunters New exhaust is pretty much made apart from down pipe.
Just got to order GT30, injectors and ECU this month and it should be pretty much there. Oh and make a new cambelt tensioner
Then she will be ready for mapping.
how do you remember where it all came from
09-05-2006, 10:16 PM
#200
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fudgeass
Originally Posted by Dan
Looking good mate, nice to see some pics up at last! 
lack of time/money doesnt help get things done lol
You sold the 200sx yet?