My Mk2 Fiesta New Carbon Fibre! *22/11/14* Page 8
11-04-2007, 05:27 PM
#121
Originally Posted by rich_frst
nice one bri... look forward to seeing them pics..
ill let you no at the weekend about that sound proofing
ill let you no at the weekend about that sound proofing
No probs mate
Your 3 Door looked smart last night
Did have a quick look last night for you before we left but couldnt see you the other half didnt feel to well so we left
Brian
13-04-2007, 07:22 PM
#122
***UPDATE 13/04/07***
Spent another afternoon out side in the garage and managed to strip the rest of the interior so now the car is almost striped of every thing
The only bit that needs welding passenger foot well dont like the way this patch was done lol
Some pictures of the engine bay with the battery tray cut out ready to be welded and a bit more rubbed down
Some of the front panel with the plates i have made ready to be welded in place
Passenger side wing removed (better picture than before)
One of the wiring loom removed
The plie of bits that i removed
Thats it until next week
Brian
Spent another afternoon out side in the garage and managed to strip the rest of the interior so now the car is almost striped of every thing
The only bit that needs welding passenger foot well dont like the way this patch was done lol
Some pictures of the engine bay with the battery tray cut out ready to be welded and a bit more rubbed down
Some of the front panel with the plates i have made ready to be welded in place
Passenger side wing removed (better picture than before)
One of the wiring loom removed
The plie of bits that i removed
Thats it until next week
Brian
19-04-2007, 04:40 PM
#124
Cheer's Rich
Done a bit more today, managed to get the plates welded on the front panel and also started welding some of the small holes on the inner wings but run out of welding wire
and forgot to take my camera so didnt get any pictures
Will get some tomorrow
Brian
Done a bit more today, managed to get the plates welded on the front panel and also started welding some of the small holes on the inner wings but run out of welding wire
and forgot to take my camera so didnt get any pictures Will get some tomorrow
Brian
17-05-2007, 09:54 AM
#129
Thanks for the reply's
coming along nicely Brian, what plans you got for the interior
Going to change a few things getting the dash flocked going to be keeping the rear the same but getting the whole inside painted so when i take the install out for track days and that it will still look mint
Brian
Originally Posted by Brookesy
coming along nicely Brian, what plans you got for the interior Brian
05-06-2007, 03:16 PM
#132
**UPDATE 05/06/07 NEW ENGINE**
Update time again got offered a new Zetec Turbo engine over the weekend and i decided to buy it
Here's the spec
ZETEC TURBO ENGINE
THE ENGINE HAS BEEN BORED FROM A 2.0 TO A 2.1 LITRE CAPACITY (REBORE WAS DONE BY IAN HOWALL)
ARP BOLTS THROUGHOUT
WRC STEEL RODS
ARIAS PISTONS
IAN HOWALL SPECIAL CAMS
DOUBLE VALVE SPRINGS
STEEL MULTI LAYER HEAD GASKET
STAGE 2 BRAND NEW T34 TURBO WITH MODIFIED EXHAUST HOUSING
BILLET FUEL RAIL WITH WEBBER INJECTORS
RS1800 INLET MANIFOLD AND THROTTLE BODY
3 BAR MAP SENSOR
COSSIE FUEL PRESSURE REGULATOR
Will be collecting it soon as i can
Brian
Update time again got offered a new Zetec Turbo engine over the weekend and i decided to buy it
Here's the spec
ZETEC TURBO ENGINE
THE ENGINE HAS BEEN BORED FROM A 2.0 TO A 2.1 LITRE CAPACITY (REBORE WAS DONE BY IAN HOWALL)
ARP BOLTS THROUGHOUT
WRC STEEL RODS
ARIAS PISTONS
IAN HOWALL SPECIAL CAMS
DOUBLE VALVE SPRINGS
STEEL MULTI LAYER HEAD GASKET
STAGE 2 BRAND NEW T34 TURBO WITH MODIFIED EXHAUST HOUSING
BILLET FUEL RAIL WITH WEBBER INJECTORS
RS1800 INLET MANIFOLD AND THROTTLE BODY
3 BAR MAP SENSOR
COSSIE FUEL PRESSURE REGULATOR
Will be collecting it soon as i can
Brian
19-06-2007, 08:12 PM
#136
***UPDATE 19/6/07 Engine Is Here***
Well my new engine is finally here
Here's a few picture's will get some better one's 2mrw
Spec
ZETEC TURBO ENGINE
THE ENGINE HAS BEEN BORED FROM A 2.0 TO A 2.1 LITRE CAPACITY (REBORE WAS DONE BY IAN HOWALL)
ARP BOLTS THROUGHOUT
WRC STEEL RODS
ARIAS PISTONS
IAN HOWALL SPECIAL CAMS
DOUBLE VALVE SPRINGS
STEEL MULTI LAYER HEAD GASKET
STAGE 2 BRAND NEW T34 TURBO WITH MODIFIED EXHAUST HOUSING
BILLET FUEL RAIL WITH WEBBER INJECTORS
RS1800 INLET MANIFOLD AND THROTTLE BODY
3 BAR MAP SENSOR
COSSIE FUEL PRESSURE REGULATOR
Brian
Well my new engine is finally here
Here's a few picture's will get some better one's 2mrw
Spec
ZETEC TURBO ENGINE
THE ENGINE HAS BEEN BORED FROM A 2.0 TO A 2.1 LITRE CAPACITY (REBORE WAS DONE BY IAN HOWALL)
ARP BOLTS THROUGHOUT
WRC STEEL RODS
ARIAS PISTONS
IAN HOWALL SPECIAL CAMS
DOUBLE VALVE SPRINGS
STEEL MULTI LAYER HEAD GASKET
STAGE 2 BRAND NEW T34 TURBO WITH MODIFIED EXHAUST HOUSING
BILLET FUEL RAIL WITH WEBBER INJECTORS
RS1800 INLET MANIFOLD AND THROTTLE BODY
3 BAR MAP SENSOR
COSSIE FUEL PRESSURE REGULATOR
Brian
19-06-2007, 09:22 PM
#138
Originally Posted by smitsturbo
was that the engine from ebay? lovely spec mate, when do you think you'll have it running by?
Not to sure when it will be running getting married next month so spending most of our money on that
Brian
19-06-2007, 09:22 PM
#139
Originally Posted by smitsturbo
was that the engine from ebay? lovely spec mate, when do you think you'll have it running by?
Not to sure when it will be running getting married next month so spending most of our money on that
Brian
20-06-2007, 06:49 AM
#143
Originally Posted by Charlie Chalk
Thats gonna go like the clappers! 
Whats the plans for the car mate?
Whats the plans for the car mate?
Going to smooth over the engine bay and get it painted again also getting the inside and under side painted the inteiror is staying the same although i am thining about leaving it stripped out for a while so i can go to Santa Pod and that and put some times down
Brian
Cant wait to see engine in and running
