Picture request - Rear end of WRC Escorts!!
20-09-2007, 07:31 PM
#6
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Nothing but the best for you Radders my little cupcake!
I used to have a really close up one of the xhaust on this one but i've lost it somewhere!
Trending Topics
20-09-2007, 09:24 PM
#24
PassionFord Post Whore!!
iTrader: (4)
I think they had different exhausts depending on noise restrictions? I know the RS 2000 rally car has a few options depending on the stage.
-Normal bumper exit, silenced
-Normal bumper exit, unsilenced
-Side exit, unsilenced
Maybe its the same for the Cossie rally car?
-Normal bumper exit, silenced
-Normal bumper exit, unsilenced
-Side exit, unsilenced
Maybe its the same for the Cossie rally car?
21-09-2007, 08:08 AM
#25
Advanced PassionFord User
The majority of the homologated cars ran twin side exits, with cats....no silencers....very difficult to get through noise test and vunerable in the sticks.....
The rear exit version was still an option and as you can see on Mark Jaspers later (R6 FMC) car they ran a rear exit version on the works cars...mainly gravel cars...
These were titanium.....they ran down the offside of the car with the cross over at the back as per the pic of mine below....
Ian
The rear exit version was still an option and as you can see on Mark Jaspers later (R6 FMC) car they ran a rear exit version on the works cars...mainly gravel cars...
These were titanium.....they ran down the offside of the car with the cross over at the back as per the pic of mine below....
Ian
21-09-2007, 08:41 AM
#27
Originally Posted by ian sibbert
The majority of the homologated cars ran twin side exits, with cats....no silencers....very difficult to get through noise test and vunerable in the sticks.....
The rear exit version was still an option and as you can see on Mark Jaspers later (R6 FMC) car they ran a rear exit version on the works cars...mainly gravel cars...
These were titanium.....they ran down the offside of the car with the cross over at the back as per the pic of mine below....
Ian
The rear exit version was still an option and as you can see on Mark Jaspers later (R6 FMC) car they ran a rear exit version on the works cars...mainly gravel cars...
These were titanium.....they ran down the offside of the car with the cross over at the back as per the pic of mine below....
Ian
that aint titanium!
21-09-2007, 08:52 AM
#28
Advanced PassionFord User
Originally Posted by DaBoy12s
Originally Posted by ian sibbert
The majority of the homologated cars ran twin side exits, with cats....no silencers....very difficult to get through noise test and vunerable in the sticks.....
The rear exit version was still an option and as you can see on Mark Jaspers later (R6 FMC) car they ran a rear exit version on the works cars...mainly gravel cars...
These were titanium.....they ran down the offside of the car with the cross over at the back as per the pic of mine below....
Ian
The rear exit version was still an option and as you can see on Mark Jaspers later (R6 FMC) car they ran a rear exit version on the works cars...mainly gravel cars...
These were titanium.....they ran down the offside of the car with the cross over at the back as per the pic of mine below....
Ian
that aint titanium!
21-09-2007, 09:05 AM
#30
Advanced PassionFord User
Ok pal I bow down to to your superior knowledge of these things....its obviously not titty.....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
21-09-2007, 09:33 AM
#32
Originally Posted by ian sibbert
Ok pal I bow down to to your superior knowledge of these things....its obviously not titty.....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
if you look at the top picture of the exhaust you posted the bracket that attatches to the bumper area, looks like it has been MIG welded, how many people do you know that can MIG weld titanium?
I am not trying to be a smart arse, but without seeing it in the flesh i would say that it is not titanium
21-09-2007, 09:52 AM
#33
Advanced PassionFord User
Originally Posted by DaBoy12s
Originally Posted by ian sibbert
Ok pal I bow down to to your superior knowledge of these things....its obviously not titty.....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
if you look at the top picture of the exhaust you posted the bracket that attatches to the bumper area, looks like it has been MIG welded, how many people do you know that can MIG weld titanium?
I am not trying to be a smart arse, but without seeing it in the flesh i would say that it is not titanium
Ian
21-09-2007, 10:29 AM
#35
Advanced PassionFord User
Cant get away from work Paul...lol....off to the Plains later but sadly i'm on chase car duty for Phil Burton (car 37)
We have entered a small gravel event (solway coast rally) to try and get some time in the car... just need a navvy....
We have entered a small gravel event (solway coast rally) to try and get some time in the car...
just need a navvy....
21-09-2007, 11:49 AM
#38
Originally Posted by ian sibbert
Originally Posted by DaBoy12s
Originally Posted by ian sibbert
Ok pal I bow down to to your superior knowledge of these things....its obviously not titty.....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
I can barely see a weld under the layer of dirt there is in that pics....
Pic of a titty back housing on turbo.....this is probs mild steel too....
if you look at the top picture of the exhaust you posted the bracket that attatches to the bumper area, looks like it has been MIG welded, how many people do you know that can MIG weld titanium?
I am not trying to be a smart arse, but without seeing it in the flesh i would say that it is not titanium
Ian
Thread
Thread Starter
Forum
Replies
Last Post
jessie_rs
Ford RS Cosworth Parts for Sale
11
03-06-2019 04:57 PM
Wilsfoci
Restorations, Rebuilds & Projects.
15
30-03-2016 10:26 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM