My new turbo and my car
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: May 2003
Location: Sweden
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
My new turbo and my car
It is a Garrett GT40R daulball bearing whit A/R 1.06 Comp wheel is 2.6"-3.465" and turbin wheel is 3.03"-2.68" Its rated to 750bhp and a HKS air suction funnel
Trending Topics
#14
Too many posts.. I need a life!!
Join Date: Jun 2003
Location: Australia
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Thats a damn big turbo to be putting on a streetcar!
Good luck!
BTW here;s a dyno graph of a Nissan DOHC 2.0 litre called an FJ20T. Notice how it has no power under 6000 rpm!!!
Good luck!
BTW here;s a dyno graph of a Nissan DOHC 2.0 litre called an FJ20T. Notice how it has no power under 6000 rpm!!!
#16
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: May 2003
Location: Sweden
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Vic
oh yeah it has a GT42 AND thats power at the WHEELS!!
Garrett GT42R and GT42RS has the same wheels as HKS T51R KAI and SPL turbo.
#17
Too many posts.. I need a life!!
Join Date: Jun 2003
Location: Australia
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Hello Anders,
GT42 from Ray Hall Australia is:
compressor = 2.67/3.70
exhaust = 3.03/3.43
rated @ 800hp
a wee bit bigger than yours, so you will see less lag with yours
GT42 from Ray Hall Australia is:
compressor = 2.67/3.70
exhaust = 3.03/3.43
rated @ 800hp
a wee bit bigger than yours, so you will see less lag with yours
Thread
Thread Starter
Forum
Replies
Last Post
big_Rad
General Car Related Discussion.
8
15-09-2017 09:36 AM