1/18 modified models
Jan 23, 2010 | 05:03 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Quote:
Originally Posted by
RAPID 3DR
longdog milliput is so easy to use mate,why cant u use it???
Just get more stuck to my finger's then anywere else. Never used it before, i've always used filler.
Any one got any tips?
Jan 23, 2010 | 05:06 PM
Advanced PassionFord User
Joined: Nov 2007
Posts: 1,695
Likes: 0
From: Sunderland, Tyne & Wear
have a little dish of water at hand, just dip your fingers in occasionally so it doesnt stick as much
Jan 23, 2010 | 05:12 PM
Joined: Jan 2010
Posts: 868
Likes: 0
From: norwich norfolk
Quote:
Originally Posted by
longdog
Just get more stuck to my finger's then anywere else. Never used it before, i've always used filler.
Any one got any tips?
mate mix them both together so it makes one whole colour dont mix it together so you can see both colours. then put it on your car shape it then add some water to shape it even better then wait for about 24 hours then it should be rock hard i use the terracotta milliput.
Jan 23, 2010 | 05:17 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
cheers roy i will have to keep a eye out for 1 so i can mould the wheels, we can all have a set then lol!!!!
pics still blurry ,changfe the setting on your camera for closeup..
as for miliput its simple.
are u mixing it enough????
using water to smooth it out helps,
Jan 23, 2010 | 05:21 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Am mixing untill its one solid colour, but didnt know about the water trick.
Jan 23, 2010 | 05:42 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
i actually use baby wipes to smooth over and take off bits,
works a treat.
Jan 23, 2010 | 06:27 PM
Advanced PassionFord User
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
i use the water trick too,smooths it nicly i also use baby wipes,for my hand tho
dave there is loads of designs on the jada cars,some times its cheaper to get the whole car as can use other bits.
Jan 23, 2010 | 06:28 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Its so much better to use with a bit of water. Thanks fellas.
Jan 23, 2010 | 06:28 PM
Advanced PassionFord User
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
no mate it asnt took me long do you think my spoiler is a bit on the small side i might change it but what do you think.[/quote]
cant tell mate as the pics ant to good,try to hold the cam back from the model abit,mite turn out beta
Jan 23, 2010 | 06:29 PM
Advanced PassionFord User
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
Quote:
Originally Posted by
longdog
Its so much better to use with a bit of water. Thanks fellas.
thats it now mate,u b wanting to make everything lol
Jan 23, 2010 | 06:31 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
Quote:
Originally Posted by
RAPID 3DR
i use the water trick too,smooths it nicly i also use baby wipes,for my hand tho
dave there is loads of designs on the jada cars,some times its cheaper to get the whole car as can use other bits.
i willhave a look at a few and see what i like!!!!
might be some cheap models up for grabs minus the wheels lol
Jan 23, 2010 | 06:39 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Quote:
Originally Posted by
mentalistdave
i willhave a look at a few and see what i like!!!!
might be some cheap models up for grabs minus the wheels lol
With my new found skill's, am going to need some more cars to mod.lol
Jan 23, 2010 | 07:07 PM
Advanced PassionFord User
Joined: Nov 2007
Posts: 1,695
Likes: 0
From: Sunderland, Tyne & Wear
Quote:
Originally Posted by
mentalistdave
i willhave a look at a few and see what i like!!!!
might be some cheap models up for grabs minus the wheels lol
ive bought a load of them in the past, some you get two sets but those are rarer now.
best bit is theyre all based on real wheels and pretty good too
Jan 23, 2010 | 07:25 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
thought i would have a go at a mini kit, ignore the cellotape lol!!!!!
milliput will be coming out tonight...
Jan 23, 2010 | 07:42 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Last edited by longdog; Jan 23, 2010 at 07:48 PM .
Jan 23, 2010 | 08:05 PM
Joined: Oct 2008
Posts: 1,430
Likes: 7
From: Mk2 Land
Quote:
Originally Posted by
mentalistdave
thought i would have a go at a mini kit, ignore the cellotape lol!!!!!
milliput will be coming out tonight...
This looks well cool,love the RS rims,they would look a treat on my escort avo
Jan 23, 2010 | 08:32 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
yere i have a set of them on my avo and they are smart.
will have some more in stock next week.
they suit the mini really well tooooooo.
Jan 23, 2010 | 10:37 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
i am still unsure of what wheels to put on this bloody model!!!
what u think of these hockenheim's ??????????
Jan 23, 2010 | 10:41 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Man thats low!! Think I would have the wheels silver.
Jan 23, 2010 | 10:43 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
yere silver would be nice .and with these wheels it is well low...
Jan 23, 2010 | 10:47 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Jan 23, 2010 | 10:50 PM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
was a rally car untill i attacked it. lol
re smoothed the front end with filler and rebuilt the rear bumper.smoothed out all the roof removing all the vents and scoops, then finished it of with a new custom rear spoiler.
turned out well..just never seem to get the right wheels for it as they are always to small or to big.
Jan 23, 2010 | 10:58 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
I know what your saying about the wheels. To be honest I think its the spliter throwing the lines out a bit, which always makes wheel choice hard for me. I am one picky bastard tho. lol
Edit: Its not a dig btw, it looks spot on.
Last edited by longdog; Jan 23, 2010 at 11:14 PM .
Jan 24, 2010 | 12:42 AM
Joined: Sep 2009
Posts: 2,223
Likes: 0
From: essex
Quote:
Originally Posted by
mentalistdave
yere silver would be nice .and with these wheels it is well low...
Or black wheels to keep with the black and White look
I wld do something different like bright orange or bright green
Jan 24, 2010 | 12:44 AM
Joined: Sep 2009
Posts: 2,223
Likes: 0
From: essex
Dave u got any wheels that wld be the right size for my Renault 5 as still not found any
Jan 24, 2010 | 12:54 AM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Think I need a r5 gtt. Got a xr3i, 205 gti, mk1 golf gti.
Can you get a mk1/mk2 Astra gte?
Jan 24, 2010 | 01:08 AM
Joined: Sep 2009
Posts: 2,223
Likes: 0
From: essex
Only astra I know they do is the astra 4 coupe touring car as I wanted an astra and that's what I had to get, but think they brought out the new shape astra cos see some on german eBay
Jan 24, 2010 | 01:21 AM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Well so much for selling the one's I've got. lol Got a r5 gtt and Delta on my list now.
Jan 24, 2010 | 02:14 AM
Advanced PassionFord User
Joined: Nov 2007
Posts: 1,695
Likes: 0
From: Sunderland, Tyne & Wear
dave those wheels are spot on, just put some black centre caps or something on to break all the white up a bit
Jan 24, 2010 | 10:49 AM
Thread Starter
Joined: Sep 2009
Posts: 1,575
Likes: 0
From: margate
Quote:
Originally Posted by
petey.
dave those wheels are spot on, just put some black centre caps or something on to break all the white up a bit
cheers m8,
will get out the black paint....
colin!!
i don't have any wheels small enough for the r5, only the 1 set i have on mine. u will need to get some 1/24 scale wheels, but make sure they are 20" versions otherwise they will be way to small.
Jan 24, 2010 | 01:36 PM
Advanced PassionFord User
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
Quote:
Originally Posted by
mentalistdave
nice job as always m8
i would go for the blue as well.
i might have a go at one once the series 1 kit is done as i can use the arches as a base lol, bit of a cheat but will save a hell of alot of time.
thanks mate,
bloody cheat lol. yeah defo save some time.
get it started mate
love the mini,i think it would look better with a roof spoiler like albo's did
Jan 24, 2010 | 01:38 PM
Advanced PassionFord User
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
Quote:
Originally Posted by
longdog
them chips look yummy
Jan 24, 2010 | 01:44 PM
I'm Finding My Feet Here Now
Joined: May 2007
Posts: 123
Likes: 0
What u think of the esc cab with white wheels? i havent glued it on yet....
and my 6 quid bargain!
Jan 24, 2010 | 03:02 PM
Advanced PassionFord User
Joined: Nov 2007
Posts: 1,695
Likes: 0
From: Sunderland, Tyne & Wear
those wheels are nice mate, just paint them silver and turn the tires round so the lettering goes
Jan 24, 2010 | 03:13 PM
Joined: Jun 2007
Posts: 3,153
Likes: 0
From: ...............
Quote:
Originally Posted by
RAPID 3DR
them chips look yummy
I,ll get you a pick of the 1/2 lb cheese burger next time.lol
Jan 24, 2010 | 03:54 PM
I'm Finding My Feet Here Now
Joined: May 2007
Posts: 123
Likes: 0
Quote:
Originally Posted by
petey.
those wheels are nice mate, just paint them silver and turn the tires round so the lettering goes
cheers mate, what paint best to use?
Jan 24, 2010 | 04:10 PM
Joined: May 2003
Posts: 11,659
Likes: 5
From: Middlesex AKA Planet earth!!!!
selling couple of my models all are mint and come with there boxes
1/18 Lui rs500 minichamps touring car 80.00 + postage
1/18 UT escos silver street car version 60.00 + postage
1/18 Nissan GTR kyoscho 60.00 + postage
Jan 24, 2010 | 04:39 PM
Joined: Feb 2009
Posts: 2,587
Likes: 30
From: Devon
How do you take apart a SunStar RS1600i. The front splitter is in the way of just pulling the base off so needs to come off first, but how ???
Jan 24, 2010 | 05:33 PM
Joined: Jan 2010
Posts: 868
Likes: 0
From: norwich norfolk
Quote:
Originally Posted by
thebigmacmoomin
How do you take apart a SunStar RS1600i. The front splitter is in the way of just pulling the base off so needs to come off first, but how ???
just pull it off mate nothing shouldnt break ive done it to both of mine.
Jan 24, 2010 | 05:51 PM
Joined: Feb 2009
Posts: 2,587
Likes: 30
From: Devon
Quote:
Originally Posted by
BlackFocus20
I like it with the white wheels, but I would take the tyres off and turn them arround.